MakerX WX746.9 - Glue gun WORX - Free user manual and instructions
Find the device manual for free MakerX WX746.9 WORX in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Cordless Glue Gun |
| Model | MakerX WX746.9 |
| Brand | WORX |
| Power Source | 20V Max Lithium Battery (sold separately) |
| Heating Element | PTC ceramic heater |
| Temperature Range | 250°F - 350°F (120°C - 177°C) adjustable |
| Warm-Up Time | Approximately 60 seconds |
| Glue Stick Diameter | 11 mm (0.43 in) |
| Flow Rate | Adjustable trigger control for precise glue flow |
| Nozzle Type | Precision tip for detailed work |
| Anti-Drip Feature | Yes, prevents glue leakage when not in use |
| Auto Shut-Off | After 5 minutes of inactivity for safety |
| Dimensions (L x W x H) | 8.9 x 6.9 x 2.2 in (226 x 175 x 55 mm) |
| Weight (without battery) | 0.64 lbs (290 g) |
| Battery Compatibility | WORX MakerX series 20V batteries |
| Maintenance | Clean nozzle after each use; store in a dry place |
| Safety Features | Heat-resistant housing, trigger lock, automatic shut-off |
| Spare Parts Available | Replacement nozzles, heating element, and trigger assembly |
| Repairability | Modular design; user-serviceable parts accessible |
| Warranty | 2 years limited warranty |
| Applications | Crafts, DIY repairs, woodworking, electronic assembly |
Frequently Asked Questions - MakerX WX746.9 WORX
How do I load a glue stick into the Worx MakerX WX746.9?
Insert a 11mm diameter glue stick into the rear loading port. Push gently until it engages with the feeding mechanism. Use only high-temperature glue sticks for optimal performance.
Can I use this glue gun cordlessly?
Yes, the Worx MakerX WX746.9 is a cordless glue gun that operates on a 20V WORX battery (sold separately). Ensure the battery is fully charged for best results.
How long does it take to heat up?
The glue gun heats up in approximately 60 seconds. A built-in indicator light lets you know when it's ready.
What is the temperature range of this glue gun?
The temperature is adjustable between 250°F and 350°F (120°C to 177°C). Use the dial to set the desired temperature for different materials.
How do I prevent glue dripping?
The glue gun features an anti-drip mechanism that retracts glue after each trigger pull. Additionally, set the gun on its stand when idle to avoid contact with surfaces.
Is the glue gun safe to leave unattended?
The glue gun has an auto shut-off feature that turns off the heater after 5 minutes of inactivity. However, always unplug the battery and place the gun in a safe location when not in use.
What glue sticks are compatible?
Use only 11 mm diameter glue sticks. Both standard and high-temperature sticks work. Avoid using glue sticks with a different diameter as they may cause jamming.
How do I clean the nozzle if it gets clogged?
Unplug the battery and allow the gun to cool. Gently heat the nozzle with a heat gun to soften any residue, then wipe with a cloth. Use a nozzle cleaning tool if available.
Can I use the glue gun with different battery types?
This glue gun is part of the WORX MakerX system and uses 20V Max lithium batteries from WORX. It is not compatible with other battery brands or voltages.
What should I do if the glue gun stops heating?
First, check the battery level and recharge if needed. Ensure the battery is properly installed. If the issue persists, inspect the heating element and trigger assembly. Refer to the manual or contact WORX customer support for replacement parts.
User questions about MakerX WX746.9 WORX
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Glue gun in PDF format for free! Find your manual MakerX WX746.9 - WORX and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. MakerX WX746.9 by WORX.
