CG4A54S8 - Dishwasher CONSTRUCTA - Free user manual and instructions

Product Type	Dishwasher
Brand	Constructa
Model	CG4A54S8
Width	60 cm
Height	84.5 cm
Depth	57.5 cm
Weight	Approx. 50 kg
Power Supply	220-240 V, 10 A, 50 Hz
Water Consumption	9.5 L per cycle
Energy Consumption	0.9 kWh per cycle
Capacity	14 place settings
Number of Programs	6
Noise Level	46 dB
Delay Start	Yes (up to 24 hours)
Child Lock	Yes
Self-Cleaning Filter	Yes
Energy Efficiency Class	A+
Installation Type	Fully built-in
Control Type	Electronic push buttons

Frequently Asked Questions - CG4A54S8 CONSTRUCTA

How do I properly load the dishwasher for best cleaning results?

Place larger items like plates and pots on the bottom rack facing inward. Place smaller items like cups and glasses on the top rack upright. Position silverware with handles down in the basket. Avoid blocking the spray arms by ensuring tall items do not obstruct them.

What should I do if the dishwasher does not start?

Check if the door is properly closed and latched. Ensure the power cord is plugged in and the circuit breaker is not tripped. Verify that the water supply is turned on. If the problem persists, look for error codes on the display and refer to the manual.

How do I clean the filter system?

Turn off the dishwasher and remove the lower rack. Rotate the coarse filter counterclockwise and lift it out. Remove the fine filter underneath. Rinse both under running water to remove debris. Reassemble in reverse order. Clean filters after every few cycles to maintain performance.

What does error code E15 mean?

Error code E15 indicates a water leak detected by the AquaStop system. Turn off the water supply, unplug the machine, and disconnect the water inlet hose. Check for leaks at the connections. Wipe up any standing water. If the code persists, contact customer service.

Can I use regular dish soap instead of rinse aid?

No, regular dish soap produces too many suds and can damage the machine. Use only detergent designed for dishwashers. Rinse aid is separate and improves drying by reducing water spots. Fill the rinse aid reservoir when the indicator shows low.

How do I adjust the water softener setting?

Refer to the manual to determine your water hardness level. Typically, you can adjust settings via the button combination: press and hold the Program button while turning on the device. Use the program buttons to set the level (H:00 to H:04). Confirm by holding the start button.

Why is there standing water at the bottom after a cycle?

This could be due to a clogged filter or drain hose. First, clean the filter system. Then, check the drain hose for kinks or blockages. Ensure the sink drain is not obstructed. If the issue remains, the drain pump may need inspection.

What is the maximum delay start time?

The maximum delay start time is 24 hours. Press the Delay Start button repeatedly to set the delay in 1-hour increments. The selected delay time will appear on the display. The dishwasher will start automatically after that period.

How do I enable the child lock?

Press and hold the Child Lock button (usually with a padlock icon) for 3 seconds until the indicator lights up. To disable, repeat the same step. When activated, all buttons except the lock are disabled to prevent accidental operation by children.

Where can I obtain spare parts?

Spare parts such as filters, spray arms, and racks can be ordered through the Constructa website or authorized service centers. Use the model number CG4A54S8 to find compatible parts. For internal parts (pumps, heating elements), contact a qualified technician.

USER MANUAL CG4A54S8 CONSTRUCTA

.הכלההוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָהוּרָה

Mechanical assembly diagram showing a tool interacting with a circular component (no text or symbols visible)

1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 1. 17.

Diagram of a mechanical component with a central hub and directional arrow indicating rotation (no text or symbols)

.1. 1.2.3.4.5.6.7.8.9.10.11.12.13.14.15.16.17.18.19.20.21.22.23.24.25.26.27.28.29.30.31.32.33.34.35.36.37.38.39.40.41.42.43.44.45.46.47.48.49.50.51.52.53.54.55.56.57.58.59.60.61.62.63.64.65.66.67.68.69.70.71.72.73.74.75.76.77.78.79.80.81.82.83.84.85.86.87.88.89.90.91.92.93.94.95.96.97.98.99.100

Diagram showing two mechanical or structural configurations with rotating components and directional arrows (no text or symbols)

Isometric line drawing of a multi-tiered mechanical device with wheels and a central disc (no text or symbols)

Diagram of a container being lifted by a hook, surrounded by wavy lines (no text or symbols)

\* כְרִי אַלְה

Technical line drawing of a multi-layer electronic component with internal structure (no text or symbols)

\* כְרַעָה אַתְבּ

\* כְרִי

Interior view of a kitchen appliance drawer with cutlery and utensils (no text or symbols visible)

Isometric view of a multi-level industrial or warehouse structure with structural beams and a central component, showing no visible text or symbols.

3D rendering of a wire basket with handle and grid pattern (no text or symbols)

תְרָה בַלְאָה

Illustration of a basket containing various kitchen utensils and food items (no text or symbols)

Illustration of a multi-tiered kitchen appliance with cutlery and utensils (no text or symbols)

Illustration of a cooking process with a funnel pouring granular material into a pan, and a lid showing a wavy arrow (no text or symbols)

*

תְרָה בַרִי הַלְרָה

הכלההוּרָההוּרָההוּרָההוּרָההוּרָההוּרָההוּרָההוּרָההוּרָההוּרָההוּרָההוּרָההוּרָההוֱשְׁתֹן

בְרַעָה אִיַעָה

תְבָרִי הַלְהָה

Line drawing of a multi-level kitchen appliance with internal compartments and base plates (no text or symbols)

he