TFK 8451 SCG 30 - Tumble drier BLOMBERG - Free user manual and instructions
Find the device manual for free TFK 8451 SCG 30 BLOMBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Condenser Tumble Dryer |
| Brand | Blomberg |
| Model | TFK 8451 SCG 30 |
| Capacity | 8 kg |
| Energy Class | A++ |
| Drum Volume | 118 L |
| Dimensions (Height × Width × Depth) | 84.6 × 59.6 × 60.0 cm |
| Weight | 45 kg |
| Power Consumption (kWh per cycle) | 2.0 kWh |
| Voltage / Frequency | 220-240 V / 50 Hz |
| Noise Level | 65 dB(A) |
| Control Type | Electronic with LED Display |
| Number of Programs | 12 (Cotton, Synthetics, Delicates, Mix, etc.) |
| Drying Levels | 3 (Cupboard Dry, Iron Dry, Extra Dry) |
| Delay Start | Up to 24 hours |
| Anti-Crease Function | Yes (up to 2 hours after cycle) |
| Child Lock | Yes |
| Lint Filter | Easy-Clean Lint Filter |
| Water Tank Capacity | 4.5 L |
| Condenser Type | Self-Cleaning Condenser (with indicator) |
| Safety Features | Overheating Protection, Door Lock, Child Lock |
Frequently Asked Questions - TFK 8451 SCG 30 BLOMBERG
How do I clean the lint filter?
Open the door, pull the lint filter upwards, remove lint by hand, rinse under water if needed, dry completely, and reinsert. Clean after every cycle.
Why is my drying cycle taking longer than usual?
Possible causes: overloading, inadequate spin in washer, clogged lint filter or condenser, or low room temperature. Check and clean these components.
What should I do if the dryer stops mid-cycle?
Check if the water tank is full (condenser models), if the program ended, or if there is a power cut. Ensure the door is closed properly. If an error code appears, consult the manual.
How do I install the dryer?
Place on a stable, level surface. Keep ventilation clearance (min 5 cm from walls). For condenser models, empty the water tank or connect a drain hose. Do not install in a freezing environment.
Can I stack it with a washing machine?
Yes, with an official Blomberg stacking kit. Ensure the washing machine supports the weight and the dryer is securely fastened. Follow the stacking kit instructions.
What does error code E1 mean?
Error E1 typically indicates a moisture sensor issue. Clean the sensor (located inside the drum) with a damp cloth. If the problem persists, contact service.
How to empty the water tank?
Pull out the water tank drawer (usually top left or bottom front), carry to a sink, remove cap, empty, and reinsert. Do not drink the condensed water.
Why are my clothes still damp after a cycle?
The load may be too large, the program unsuitable, or the lint filter blocked. Also check the selected dryness level. Redistribute clothes and select a longer program.
How to change the drying program?
Turn the program selector dial to the desired program (e.g., Cotton, Synthetics). You can adjust additional options like dryness level or time using the buttons. Press Start.
Is it safe to leave the dryer running overnight?
While the dryer has overheating protection and auto shut-off, it is not recommended to leave it unattended for long periods. Always clean the lint filter before use and avoid running when sleeping or away.
User questions about TFK 8451 SCG 30 BLOMBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual TFK 8451 SCG 30 - BLOMBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TFK 8451 SCG 30 by BLOMBERG.