LTA19321W - Tumble dryer BLOMBERG - Free user manual and instructions
Find the device manual for free LTA19321W BLOMBERG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Freestanding Condenser Tumble Dryer |
| Capacity (kg) | 7 |
| Energy Efficiency Class | B |
| Dimensions (H x W x D) | 845 x 598 x 613 mm |
| Weight (kg) | 43 |
| Power Supply (V/Hz) | 220-240 / 50 |
| Total Power Consumption (kWh/cycle) | 4.5 (standard), 2.5 (low heat) |
| Noise Level (dB) | 65 |
| Number of Programs | 16 |
| Program Types | Cottons, Synthetics, Delicates, Wool, Shirts, Sportswear, Mixed Fabrics, Timed Drying, Air Fluff, Anti-Crease, Jeans, Refresh, Drum Clean, Rack Drying, Quick 30 Min, Extra Dry |
| Key Technologies | Reverse Tumble Action, Moisture Sensor, 3D Drying System, Anti-Crease Function, Delay Start (up to 24h), Child Lock |
| Condenser Self-Cleaning | Yes (manual clean indicator) |
| Lint Filter | Yes (front accessible) |
| Door Reversible | Yes |
| Display | LED with remaining time, program phase, delay indicator |
| Safety Features | Child Lock, Overheating Protection, Door Open Detection, Water Overflow Protection |
| Spare Parts Availability | Genuine Blomberg parts: belt, drum bearings, heater, fan, control board, door hinge, filter |
| Warranty (standard) | 2 years |
| Repairability Index (out of 10) | 7.5 (service-friendly design, accessible components) |
| Includes | Instruction manual, drainage hose, rack for wool/delicates |
Frequently Asked Questions - LTA19321W BLOMBERG
How do I clean the lint filter on my Blomberg LTA19321W dryer?
Open the door, locate the lint filter at the bottom of the door opening. Pull it upward to remove. Open the filter and remove lint by hand or with a vacuum. Rinse under running water if needed. Dry completely before reinstalling. Clean after every cycle to maintain drying efficiency.
What does the 'Condenser Clean' indicator mean?
The indicator lights up when the condenser unit needs cleaning. This is typically after 30-40 cycles. To clean, open the lower front flap, pull out the condenser, rinse it with water, and let it dry before reinserting. A dirty condenser increases drying time and energy consumption.
Why is my dryer not heating?
Possible causes: blown thermal fuse, faulty heating element, or overheating protection tripped. First, check if the lint filter and condenser are clean. If the problem persists, unplug the dryer and inspect the thermal fuse (located near the heater). Replace if necessary. If unsure, contact a professional.
Can I install the dryer in a cold room or garage?
Yes, but ambient temperature should be between 5°C and 35°C. Below 5°C, the dryer may take longer or stop working. Ensure proper ventilation and avoid freezing conditions. The dryer's condenser technology works best at room temperature.
How do I reduce the load capacity to prevent overloading?
The maximum load is 7 kg for cotton. For synthetics, fill half full. For delicate fabrics, one-third full. Overloading causes poor drying results and excessive energy use. Use the 'Quick 30 Min' program for small loads (up to 2 kg).
What is the 'Reverse Tumble Action' feature?
This feature changes the drum rotation direction at regular intervals to prevent laundry from tangling and to ensure even drying. It reduces creasing and minimizes wear on fabrics. It is active in cotton and synthetic programs by default.
How do I use the rack for wool or delicates?
Place the drying rack inside the drum, ensuring it sits securely on the drum ribs. Place wet items flat on the rack, not overlapping. Select the 'Rack Drying' program. This allows gentle drying without tumbling, ideal for sweaters and delicate fabrics.
Why does the dryer stop mid-cycle?
Common reasons: overheating (clean lint filter/condenser), door opened (check latch), or power failure. Also, the anti-crease phase may pause the drum at the end. If the dryer stops with an error code, refer to the manual. For persistent issues, inspect the thermal fuse.
Can I change the door opening direction?
Yes, the door is reversible. You need a screwdriver and typically the hinges and catch can be swapped to the opposite side. Detailed instructions are in the user manual. It is recommended to have two people for the task to avoid damaging the door panel.
How do I reset the child lock?
If the child lock is activated, the control panel buttons won't respond. Press and hold the 'Child Lock' button (often a key icon) for 3 seconds until the indicator turns off. On the LTA19321W, it might be combined with the 'Delay Start' button. Refer to the manual for exact location.
User questions about LTA19321W BLOMBERG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble dryer in PDF format for free! Find your manual LTA19321W - BLOMBERG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LTA19321W by BLOMBERG.
USER MANUAL LTA19321W BLOMBERG
Manual assistant
Powered by Anthropic
Waiting for your message
Product information
Brand : BLOMBERG
Model : LTA19321W
Category : Tumble dryer