Innoliving INN-533 - Fan

INN-533 - Fan Innoliving - Free user manual and instructions

Find the device manual for free INN-533 Innoliving in PDF.

📄 16 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Innoliving INN-533 - page 9
View the manual : English EN Italiano IT
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Digital Stand Fan
Brand Innoliving
Model INN-533
Power Supply 220-240 V ~ 50-60 Hz
Power Consumption (Nominal) 50 W
Fan Power Input (Measured) 36.8 W
Maximum Airflow 16.6 m³/min
Seasonal Electricity Consumption 16.20 kWh/a
Service Value 0.451 (m³/min)/W
Standby Power Consumption 0.162 W
Sound Power Level 59.2 dB(A)
Maximum Air Velocity 3.8 m/s
Speed Settings 3 (Low, Medium, High)
Timer 1 to 12 hours (hourly increments)
Oscillation Horizontal and vertical
Remote Control Yes (requires CR2025 3V battery, not included)
Display Digital screen with temperature display
Electrical Insulation Class Class II
Safety Features Protective grills, auto shut-off timer, overheat protection (not specified)
Cleaning Instructions Soft dry cloth; do not use abrasive cleaners or solvents
Assembly Telescopic tube, base, fan body (instructions included)
Intended Use Indoor domestic use only
Certifications CE compliant

Frequently Asked Questions - INN-533 Innoliving

How do I assemble the INN-533 fan?
Loosen the height adjustment screw, extend the lower part of the telescopic tube, and tighten the big screw. Unscrew the small screw from the lower part of the tube, place it into the base hole, rotate the tube and base upwards, and tighten the screw. Then insert the fan body into the top of the tube.
How do I clean the fan?
Turn off and unplug the fan. Use a soft, dry cloth to clean the parts. Do not use abrasive cleaners, chemicals, or solvents that could damage the surface.
How does the remote control work?
Install a CR2025 3V battery (not included) by removing the battery compartment cover and inserting the battery. Use the buttons: ON/OFF to power, VERTICAL SWING for vertical oscillation, HORIZONTAL SWING for horizontal oscillation, SPEED to adjust speed (1-3), and TIMER to set auto shut-off (1-12 hours). Point the remote at the fan.
How do I set the timer?
Press the TIMER button on the remote control to set the automatic shut-off in hourly increments from 1 to 12 hours. The fan will turn off after the set time.
Can I adjust the fan speed?
Yes, press the SPEED button on the remote control or fan to cycle through three speeds: F1 (Low), F2 (Medium), F3 (High).
How do I activate oscillation?
Press the SWING button to turn horizontal oscillation on or off. Press and hold the SWING button for 3 seconds to activate or deactivate vertical oscillation. During vertical oscillation, pressing SWING also activates horizontal oscillation; press again to stop horizontal and keep vertical.
What should I do if the remote control stops working?
Check if the CR2025 battery is installed correctly or replace it. Ensure there are no obstructions between the remote and the fan. If still not working, contact an authorized service center.
Is the fan safe to use around children?
The fan should not be used by children without supervision. Keep the product and cord out of reach of children. Never operate without the protective grills to avoid injury from moving blades.
Can I use the fan outdoors?
No, this fan is intended for indoor domestic use only. Using it outdoors may cause short circuits due to moisture or rain.
What type of battery does the remote control use?
The remote control requires one CR2025 3V battery. This battery is not included in the package.

User questions about INN-533 Innoliving

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Fan in PDF format for free! Find your manual INN-533 - Innoliving and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. INN-533 by Innoliving.

USER MANUAL INN-533 Innoliving

innoliving easy tech, easy life

VENTILATORE A PIANTANA DIGITALE

DIGITAL STAND FAN

Innoliving INN-533 - DIGITAL STAND FAN - 1

natural_image Modern white and black electric fan with a digital display stand (no visible text or symbols)

INN-533

MANUALE D'USO

USER MANUAL

natural_image Diagram of a mechanical device with a rotating shaft and base, labeled with number 4 (no text or symbols on the diagram itself)

TELECOMANDO

natural_image Simple line drawing of a remote control device with an arrow pointing to it (no text or symbols)

Innoliving INN-533 - TELECOMANDO - 1

Thank you for purchasing the INN-533 INNOLIVING digital stand fan.

Read the instructions carefully before use and keep this manual for future reference.

WARNINGS AND SAFETY RULES

  • Before using the appliance, carefully read the instructions for use, especially the safety warnings, and follow them. Keep this manual for the entire lifespan of the appliance for reference. Failure to follow the instructions may result in accidents and void the warranty, releasing the manufacturer from any liability.
  • This product is not intended for use by persons (including children) with reduced physical, mental, or sensory capabilities, or by those lacking experience and knowledge, unless they are supervised or instructed on the use of the appliance by a person responsible for their safety and understand the potential hazards.
  • This product is not a toy. Ensure that children do not play with the appliance. Keep the product and its cord out of the reach of children.
  • Disconnect the fan from the power supply before removing the protective grills, before any maintenance or cleaning operations, before moving the product, before long periods of non-use, or during thunderstorms.
  • Never operate the fan without the protective grills. RISK OF INJURY DUE TO ACCIDENTAL CONTACT WITH MOVING BLADES!
  • This appliance must be used solely for its intended purpose as an indoor domestic fan. Any other use is considered improper and therefore dangerous.
  • This appliance is intended for DOMESTIC USE ONLY.

- Packaging elements (plastic bags, cardboard, polystyrene, etc.) must not be left within the reach of children as they can pose a danger and should be disposed of in compliance with current regulations.

- After unpacking the appliance, check for any transport damage and verify the integrity of the supplied components according to the diagram. If damaged or if there are any doubts about its integrity, do not use the appliance and contact an authorized service center.

- Before connecting the appliance, ensure that the mains voltage data on the data label matches the local power supply. The data label is located on the appliance itself.

- The appliance plug must fit perfectly into the socket. Do not modify the plug in any way. Do not use adapters or extension cords.

- Do not use the product if it has fallen to the ground, shows visible signs of damage, or leaks.

- Do not pull the power cord to lift, carry, or unplug the appliance from the power socket.

- Ensure that the cord is not knotted or bent.

- Check the condition of the power cord. Damaged or knotted cords increase the risk of electric shock.

- Do not touch or use the product with wet or damp hands or feet. Do not touch the plug or cord with wet or damp hands or feet.

- Do not leave the product unattended while it is operating.

- If the power cord is damaged, it must be replaced by the manufacturer or an authorized service center to prevent any risk. Do not use the appliance if the cord or plug is damaged.

  • In case of malfunction or fault, switch off the appliance and do not tamper with it. For repairs, contact only an authorized service center.
  • Never immerse the product in water or other liquids. Risk of electric shock!
  • Do not use the product if it has fallen or shows visible damage or leaks.
  • Do not use the product outdoors. For operation, place the product on a flat and stable surface. Do not use the fan near an open window to avoid short circuits due to dripping or rainwater.
  • Protect the product from extreme temperatures, direct sunlight, strong vibrations, excessive humidity, moisture, flammable gases, vapors, or solvents.
  • Ensure that there are no parts, such as textiles or hair, that could get caught in the fan blades.
  • Use the appliance only with the protective grill properly closed.
  • Never cover the product while it is in operation.
  • Risk of injury! Do not insert objects through the protective grill while the product is in operation.
  • Ensure that the cord does not come into contact with hot surfaces, incandescent elements, open flames, pots, or other hot utensils.
  • For cleaning instructions, refer to the "Cleaning and Maintenance" section of the manual.
  • User cleaning and maintenance must not be carried out by children without supervision.
  • Store the product in a dry, dust-free environment, away from direct sunlight and heat sources, and out of reach of children.

- Use the appliance only with the accessories and spare parts provided.

PRODUCT DESCRIPTION

  1. INSTRUCTION MANUAL
  2. FAN BODY
  3. TELESCOPIC TUBE
  4. BASE
  5. REMOTE CONTROL

Innoliving INN-533 - PRODUCT DESCRIPTION - 1

Instruction manual
Innoliving INN-533 - PRODUCT DESCRIPTION - 2

natural_image Technical line drawing of a mechanical component with a side view (no text or symbols)

Fan body Telescopic tube

Innoliving INN-533 - PRODUCT DESCRIPTION - 3

natural_image Simple line drawing of a circular device and a rectangular remote (no text or symbols)

Base Remote control

ASSEMBLING THE FAN

STEPS:

  1. Loosen the height adjustment screw and extend the lower part of the telescopic tube. Tighten the big screw at the desired height, and unscrew the small screw from the lower part of the telescopic tube (Fig. 1);
  2. Place the lower part of the telescopic tube into the hole in the base (Fig. 2);
  3. Rotate the tube and base upwards and tighten the screw to secure them (Fig. 3);
  4. Place the base and tube on a flat surface, insert the fan body into the top of the tube, and secure it in place.

Innoliving INN-533 - STEPS: - 1

Innoliving INN-533 - STEPS: - 2

Innoliving INN-533 - STEPS: - 3

Innoliving INN-533 - STEPS: - 4

natural_image Diagram of a mechanical device with a rotating shaft and base, labeled with number 4 (no text or symbols on the diagram itself)

REMOTE CONTROL:

ON/OFF: power on and off

VERTICAL SWING: vertical swing setting

HORIZONTAL SWING: horizontal swing setting

SPEED: speed setting, from 1 to 3

TIMER: adjustable, hour by hour, from 1 to 12 hours To operate the remote control, install 1 CR2025 3V battery as shown in the figure. The battery is not included.

Remove the Install 1

battery com- CR2025 3V

partment cover battery

Innoliving INN-533 - REMOTE CONTROL: - 1

Innoliving INN-533 - REMOTE CONTROL: - 2

natural_image Two technical diagrams showing a remote control device and a handheld device (no text or symbols present)

INSTRUCTIONS FOR USE:

Place the fan on a dry, flat, and solid surface. Plug the fan into an electrical outlet.

Innoliving INN-533 - INSTRUCTIONS FOR USE: - 1

TIMER

Innoliving INN-533 - INSTRUCTIONS FOR USE: - 2

Innoliving INN-533 - INSTRUCTIONS FOR USE: - 3

Innoliving INN-533 - INSTRUCTIONS FOR USE: - 4

Innoliving INN-533 - INSTRUCTIONS FOR USE: - 5

ON/OFFSWING

Power On/Off

Press the ON/OFF button to activate the fan, which will start at speed 1 and display the indoor temperature on the screen. Press again to turn off the device.

Timer

Press the TIMER button to set the automatic shut-off, hour by hour, from 1 to 12 hours.

Oscillation

Press the SWING button to activate or deactivate horizontal oscillation. Press and hold the SWING button for 3 seconds to activate or deactivate vertical oscillation. During vertical oscillation, press the SWING button to also activate horizontal oscillation. Press the button again to stop horizontal oscillation and maintain only vertical oscillation.

Speed Control

Adjust the speed by pressing the SPEED button: F1 = Low F2 = Medium F3 = High

CLEANING AND MAINTENANCE

Turn off and unplug the appliance before performing any cleaning or maintenance. Clean the parts using a soft, dry cloth. Warning: Do not use abrasive cleaners, chemicals, or solvents that could damage the surface of the components.

RATING LABEL

Innoliving Spa - Via Merloni 2/B - 60131 Ancona - Italy

INN-533 VENTILATORE A PIANTANA DIGITALE

220-240V\~50-60Hz 50W MADE IN CHINA

Innoliving INN-533 - RATING LABEL - 1

Innoliving INN-533 - RATING LABEL - 2

Innoliving INN-533 - RATING LABEL - 3

Innoliving INN-533 - RATING LABEL - 4

Innoliving INN-533 - RATING LABEL - 5

Innoliving INN-533 - RATING LABEL - 6

Lot n.

Innoliving INN-533 - RATING LABEL - 7

This product complies with all applicable European directives.

Innoliving INN-533 - RATING LABEL - 8

Read carefully the instruction manual

Innoliving INN-533 - RATING LABEL - 9

Appliance with class II electrical insulation.

Innoliving INN-533 - RATING LABEL - 10

For indoor domestic use

Innoliving INN-533 - RATING LABEL - 11

INFORMATION TO USERS according to Legislative Decree No. 49 of March 14, 2014 "2012/19/UE Implementation of the Directive on Waste Electrical and Electronic Equipment (WEEE)" The crossed-out dustbin symbol indicates that the product at the end of its life must be collected separately from other waste. The user should, therefore, take the equipment with the essential components at the end of its useful life to the separate collection center of electronic and electrical waste, or return it to the retailer when purchasing new equipment of equivalent type, in ratio of one to one, or one to zero for devices with larger side less than 25 CM. The separate collection for the decommissioned equipment for recycling, treatment and environmentally compatible disposal contributes to avoid possible negative effects on the environment and human health and promotes recycling of the materials. Improper disposal of the product by the user entails the application of administrative sanctions according to Legislative Decree No. 49 of 14 March 2014.

DESCRIPTION SYMBOL VALUE UNIT
Type of fan according to mounting Pedestal fan
Maximum fan flow rate F 16,6 m ^3 /min
Fan power input P 36,8 W
Seasonal electricity consumption Q 16,20 (kWh/a)
Service value SV 0,451 (m ^3 /min)/W
Standby mode consumption PSB0,162 W
Off mode consumption P_OFF -W
Fan sound power level L_WA 59,2 dB(A)
Maximum air velocityC3,8m/sec
Measurement standardIEC 60879:2019
ReferentInnoliving Spa Via Merloni 2/B Ancona

innoliving easy tech, easy life

Innoliving Spa

Via Merloni, 2/B

60131 Ancona Italy

Tel 071.2133550

www.innoliving.it

MADE IN CHINA

CE

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Innoliving

Model : INN-533

Category : Fan