M20LP - Uncategorized Eoslift - Free user manual and instructions
Find the device manual for free M20LP Eoslift in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Type of Product | Manual Pallet Truck |
| Load Capacity | 2000 kg (4409 lbs) |
| Fork Length | 1150 mm (45.3 in) |
| Fork Width | 550 mm (21.7 in) |
| Lowered Height | 85 mm (3.3 in) |
| Raised Height | 200 mm (7.9 in) |
| Overall Length | 1540 mm (60.6 in) |
| Overall Width | 550 mm (21.7 in) |
| Net Weight | 75 kg (165 lbs) |
| Wheel Material | Polyurethane (PU) on Load Wheels, Nylon on Steer Wheels |
| Pump Type | Hydraulic, Single-Acting |
| Handle Type | Foldable with Rubber Grip |
| Frame Material | High-Strength Steel |
| Color | Blue and Red (Typical) |
| Maintenance | Lubricate pivot points monthly; check hydraulic oil level quarterly |
| Safety Features | Overload Relief Valve, Safety Loop Handle |
| Repairability | Replaceable pump unit, wheels, and axle components |
| General Information | Intended for indoor warehouse use; not for rough terrain |
Frequently Asked Questions - M20LP Eoslift
How do I operate the M20LP pallet truck?
To operate, insert the forks under the pallet, pump the handle to raise the load, then push or pull the truck to the desired location. To lower, gently pull the release lever. Always ensure the load is stable and within the 2000 kg capacity.
How do I maintain the hydraulic system?
Check the hydraulic oil level every three months. If low, add ISO VG 32 hydraulic oil through the filler plug. Bleed air by pumping the handle a few times with no load if the lift is spongy.
What should I do if the pallet truck won't lift?
First, check if the load exceeds capacity. Then inspect the hydraulic oil level and look for leaks. If the release lever is stuck, lubricate the linkage. If still not working, the pump or piston may need replacement.
Can I use this pallet truck on inclines?
It is not recommended. The M20LP is designed for flat, level surfaces. Use on inclines can cause instability and increase the risk of load shifting.
How do I lubricate the pallet truck?
Apply a light machine oil to all pivot points, including the handle hinge, control lever, and wheel axles. Wipe off excess to avoid attracting dirt. Lubricate monthly for smooth operation.
What are the safety precautions during use?
Always wear safety shoes. Never exceed the 2000 kg capacity. Ensure the load is evenly distributed. Keep hands clear of moving parts. Do not ride on the pallet truck.
How do I replace the wheels?
Remove the axle bolt securing the worn wheel, slide the wheel off, and install a new one with the same dimensions. Re-tighten the bolt securely. Use genuine Eoslift replacement wheels for best fit.
What is the fork length and width?
The forks are 1150 mm long and 550 mm wide (outer width). This is suitable for standard Euro pallets (1200x800 mm).
How often should I inspect the pallet truck?
Conduct a visual inspection before each use. Check for cracks, leaks, or worn parts. Perform a detailed inspection every 6 months or after heavy use.
Where can I find replacement parts?
Replacement parts such as wheels, pump units, and handle grips are available through Eoslift dealers or authorized online retailers. Always specify model M20LP when ordering.
User questions about M20LP Eoslift
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual M20LP - Eoslift and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. M20LP by Eoslift.