E20MP - Uncategorized Eoslift - Free user manual and instructions
Find the device manual for free E20MP Eoslift in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Electric Pallet Truck |
| Model | E20MP |
| Brand | Eoslift |
| Load Capacity | 2000 kg (4400 lbs) |
| Lift Height | 200 mm (7.9 in) |
| Overall Dimensions (LxWxH) | 1700 x 560 x 1250 mm (66.9 x 22.0 x 49.2 in) |
| Fork Length | 1150 mm (45.3 in) |
| Fork Width | 560 mm (22.0 in) |
| Net Weight | 350 kg (772 lbs) |
| Battery Type | Lead-acid, 24V / 200Ah |
| Charging Time | 8-10 hours |
| Drive Motor Power | 1.5 kW (2.0 hp) |
| Lift Motor Power | 2.0 kW (2.7 hp) |
| Travel Speed (Loaded/Unloaded) | 5.0 / 6.0 km/h (3.1 / 3.7 mph) |
| Turning Radius | 1600 mm (63.0 in) |
| Gradeability (Loaded/Unloaded) | 8% / 15% |
| Control System | AC drive with MOSFET controller |
| Steering | Power steering with ergonomic tiller |
| Brakes | Electromagnetic disc brake |
| Safety Features | Emergency stop, horn, overload protection, anti-rollback |
| Maintenance | Regular battery watering, tire inspection, motor lubrication |
| Operating Temperature | -10°C to 45°C (14°F to 113°F) |
Frequently Asked Questions - E20MP Eoslift
How do I charge the battery?
Connect the charger to the battery connector and plug into a standard outlet. Charging takes 8-10 hours. Ensure the truck is turned off during charging. Use only the supplied charger.
What is the maximum load capacity?
The E20MP has a load capacity of 2000 kg (4400 lbs) evenly distributed on the forks.
How often should I perform maintenance?
Daily: check tire pressure, battery water level, and emergency stop. Weekly: lubricate pivots. Monthly: inspect brakes and electrical connections. Follow the maintenance schedule in the manual.
What should I do if the truck does not lift?
Check the battery charge level. If low, charge the battery. Ensure the emergency stop is pulled out. Listen for the pump motor; if silent, check the fuse. Contact service if persistent.
Can I use the truck on a slope?
Yes, but only up to 8% grade when loaded and 15% when unloaded. Always drive with the load uphill and use the brake when stopped.
How do I change the battery?
Disconnect the battery connector, remove the side panel, lift the battery with a hoist (approximately 200 kg), and install a new lead-acid battery of the same specifications. Reconnect and secure.
What safety features are included?
Includes an emergency stop button, overload protection that prevents lifting beyond capacity, anti-rollback on slopes, and a horn for alerting pedestrians.
How do I adjust the fork width?
The fork width is fixed at 560 mm (22.0 in). It cannot be adjusted on this model.
What is the operating temperature range?
The truck operates reliably from -10°C to 45°C (14°F to 113°F). Avoid use outside these limits.
Where can I find replacement parts?
Contact your local Eoslift dealer or authorized service center. Provide the model number E20MP and serial number for accurate parts.
User questions about E20MP Eoslift
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Uncategorized in PDF format for free! Find your manual E20MP - Eoslift and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. E20MP by Eoslift.