HZ-T715A - Vacuum Cleaner HAIER - Free user manual and instructions

Product Type	Canister Vacuum Cleaner
Model	HZ-T715A
Brand	Haier
Dimensions (L x W x H)	430 mm x 290 mm x 270 mm
Weight	5.2 kg
Power Consumption	1500 W
Voltage / Frequency	220-240 V, 50/60 Hz
Dust Capacity	1.8 L
Cord Length	6 m
Filtration	HEPA filter
Noise Level	78 dB(A)
Suction Power	400 AW
Operating Radius	8 m
Hose Length	1.5 m
Telescopic Tube	Metal, adjustable length
Floor Brush	With carpet/hard floor switch
Airflow Adjustment	Slider on handle
Accessories	Sofa brush, 2-in-1 crevice tool
Maintenance	Washable dust bucket and filter
Safety Certification	CE
Repairability	Spare parts available

Frequently Asked Questions - HZ-T715A HAIER

How do I assemble the Haier HZ-T715A vacuum cleaner?

First, attach the hose to the suction inlet on the dust bucket. Then connect the telescopic metal tube to the hose handle. Finally, attach the floor brush to the tube. Ensure all connections click securely into place.

How to adjust the airflow on the vacuum cleaner?

Use the airflow adjustment slider located on the hose handle. Slide it to increase or decrease suction power as needed.

How do I switch between carpet and hard floor cleaning?

Press the carpet/hard floor conversion button on the floor brush. For carpets, the brush bristles retract; for hard floors, they extend.

How to clean the dust bucket?

Press the buckle to release the dust bucket from the main body. Open the bottom lid and empty the dust. Rinse the bucket with water and let it dry completely before reattaching.

How to maintain the HEPA filter?

Remove the filter from the dust bucket. Tap it gently to remove loose dust. If heavily soiled, rinse under running water and allow to air dry for at least 24 hours before reinstalling.

Why is the suction power reduced?

Common causes include a full dust bucket, clogged filter, or blockage in the hose or tube. Empty the bucket, clean the filter, and check the hose for obstructions.

How to store the vacuum cleaner properly?

Wrap the cord around the cord hooks, detach the hose and tube, and store the accessories on the accessory holder. Place the unit in a dry, upright position.

What accessories are included with the HZ-T715A?

The package includes a sofa brush for upholstery and a 2-in-1 crevice tool for corners and edges.

How to replace the filter?

Purchase a compatible HEPA filter from Haier or authorized retailers. Remove the old filter by pulling it out from the dust bucket, insert the new one, and ensure it is seated properly.

Is the vacuum cleaner safe for hardwood floors?

Yes, the floor brush has a hard floor mode that extends soft bristles to prevent scratches. Always use this mode on delicate surfaces.

USER MANUAL HZ-T715A HAIER

Line drawing of a vacuum cleaner with coiled hose and wheels (no text or symbols)

型号

HZ-T712

HZ-T712A

HZ-T712R

HZ-T715

HZ-T715A

HZ-T715R

HZ-T720

HZ-T720A

HZ-T720R

A. 弯管把手

B. 风量调节滑钮

C. 软管组件

D. 延长管 *

E. 地毯、硬地板转换按钮

F. 地刷

G. 提手

H. 电源开关

1. 搭扣

J. 吸尘口

K. 集尘桶

L. 万向轮

M. 主吸管

* HZ-T712 / HZ-T712A / HZ-T712R为2节塑料连接管

HZ-T715 / HZ-T715A / HZ-T715R / HZ-T720 / HZ-T720A /

HZ-T720R为金属伸缩管

产品零件与设备

P. 电源线插头

Q. 出风口

R. 进风口

S. 附件座

沙发吸

二合一扁吸

操作说明

产品装配

Line drawing of a vacuum cleaner with attached hose and base, showing mechanical components (no text or symbols)

开始使用

接通电源

Illustration of a mop, woven mat, and grid pattern (no text or symbols)

Technical diagram of a mechanical component with two labeled parts (a and b), showing internal structure without any text or symbols.

调节地刷按钮

Simple line drawing of a tool applying material to a surface (no text or symbols)

Simple line drawing of a tool applying material to a corner wall (no text or symbols)

Line drawing of a device with a connector and directional arrow (no text or symbols)

Illustration of a vacuum cleaner with tools nearby (no text or symbols)

Illustration of a vacuum cleaner next to a surface with tools and debris (no text or symbols)

Diagram of a curved pipe or embankment with a shaded section and a labeled X (no text or symbols present)

Illustration of a robot with a hammer and cross symbol, surrounded by two children and a child giving thumbs up (no text or symbols present)

Line drawing of a bucket pouring liquid into a container (no text or symbols)

Simple line drawing of a cleaning or cleaning tool on a tiled floor with scattered debris (no text or symbols)

Illustration of a vacuum cleaner emitting exhaust heat, no text or symbols present

Cert ifcate of Quality

检验员：