TAB-T710L - Vacuum Cleaner HAIER - Free user manual and instructions

Product Type	Canister Vacuum Cleaner
Brand	Haier
Model	TAB-T710L
Dimensions (L x W x H)	Approx. 35 x 25 x 25 cm (13.8 x 9.8 x 9.8 in)
Weight	Approx. 4.5 kg (9.9 lbs)
Power Supply	220-240 V ~ 50/60 Hz
Power Consumption	1200 W
Dust Capacity	1.5 L (bagless)
Filtration System	HEPA washable filter
Suction Control	Electronic slider
Cord Length	5.0 m (16.4 ft)
Noise Level	Approx. 78 dB(A)
Included Accessories	CreVice tool, dusting brush, upholstery nozzle
Special Features	Cyclonic action, automatic cord rewind
Filter Maintenance	Washable; clean every 3-4 months
Dust Bin Emptying	Press release button, empty over trash
Overheat Protection	Auto shut-off if motor overheats
Floor Types	Carpet, hardwood, tile, laminate
Replacement Parts Available	Filters, brush roll, belts
Warranty	2 years limited

Frequently Asked Questions - TAB-T710L HAIER

How do I empty the dust bin on my Haier TAB-T710L?

Press the release button on the dust bin handle, lift it off the main body, then hold over a trash can and press the bottom release to open the lid. Tap gently to remove all dust. Close the lid and reattach.

How often should I clean the filter?

Clean the HEPA filter every 3-4 months or when suction drops. Tap off loose dust, then rinse under running water (max 40°C). Let it air dry completely for 24 hours before reinstalling. Do not use detergent or heat.

The vacuum has lost suction. What should I do?

Check for blockages in the hose, wand, and floor nozzle. Empty the dust bin. Clean the filter. Also check if the dust bin is properly seated. If issues persist, inspect the brush roll for hair/debris.

Can I use the vacuum on hardwood floors?

Yes, the Haier TAB-T710L is safe for hardwood floors. Use the hard floor setting or turn off the rotating brush if available. The included dusting brush is ideal for delicate surfaces.

How do I change the belt?

Disconnect power. Remove the brush roll cover by pressing the tabs. Lift out the brush roll and remove the old belt. Loop the new belt around the motor shaft and brush roll. Reinstall and snap cover closed.

What does the red light on the vacuum indicate?

A red light typically indicates a blockage, full dust bin, or need for filter cleaning. If the light stays on, check the manual for specific error codes. Often resetting the vacuum power clears the light.

How do I clean the brush roll?

Turn off and unplug. Remove the brush roll cover. Lift out the brush roll. Use scissors to cut and remove tangled hair and threads. Clean with a dry cloth. Reinstall the brush roll and cover.

The vacuum overheats and shuts off. Why?

Overheating is usually due to a blocked airflow or clogged filter. Turn off and unplug. Empty the dust bin, clean the filter, and check for blockages in the hose. Let the vacuum cool for 30 minutes before restarting.

How do I rewind the power cord?

Hold the cord with one hand and press the cord rewind pedal or button (located on the vacuum body). Keep your hand on the cord until it is fully retracted to avoid whipping. Do not let the cord snap back.

Where can I buy replacement filters?

Replacement HEPA filters and other accessories are available on the Haier website, Amazon, or at authorized service centers. Use only genuine parts to maintain warranty and performance.

USER MANUAL TAB-T710L HAIER

Simple line drawing of a cartoon character wearing a helmet and uniform (no text or symbols)

Line drawing of a circular vacuum cleaner with labeled parts (no text or symbols present)

主机

集尘盒

1.初级滤网

2.高效滤网

1. 过滤海绵

2. 集尘盒

5.集尘盒盖

水箱组件

1. 水箱密封塞

2. 蓄水器

3. 渗水抹布

充电基座

1. 充电指示灯

2.DC电源插孔

3.充电端子

Simple line drawing of a hand pointing at a circular object with a small circle inside, next to a circular ring (no text or symbols)

人性化设计

Technical line drawing of a mechanical device with a faucet and water spray (no text or symbols)

垃圾盒可用水冲洗

Line drawing of a circular device with a handle and connector, no text or symbols present

Diagram showing a hand connecting a circular device to a cable with a power outlet (no text or symbols present)

充电方式A

Simple line drawing of a circular object with a small protrusion and a central dot (no text or symbols)

充电方式B

Simple line drawing of a circular object with a small protrusion and two small circles on the top (no text or symbols)

本产品符合欧洲ERP能源损耗标准。

Simple circular diagram with a central circle labeled '14' and two side extensions (no text or symbols beyond the label)

开机

Line drawing of a hand using a tool to cut a component on a curved base (no text or symbols)

Technical line drawing of a mechanical component with a curved top and rectangular base (no text or symbols)

Line drawing of a circular robotic device with a handle and mounting bracket (no text or symbols)

Line drawing of a circular robotic vacuum cleaner with attached components (no text or symbols)

按下尘盒释放键取出尘盒。

打开尘盒盖，倾倒垃圾。

取出初级滤网

Exploded view diagram of a 3D electronic component showing internal structure and casing (no text or symbols)

Technical line drawing of a water dispenser with faucet and valve (no text or symbols)

冲洗尘盒及初效滤网。

Exploded view diagram of a battery pack with internal compartments and plastic sheet (no text or labels)

Line drawing of a circular vacuum cleaner with attached components (no text or symbols)

盖上尘盒盖子，将尘盒安装到主机上。

Technical line drawing of a mechanical component with a curved top and rectangular base (no text or symbols)

取出渗水抹布

5.3 水箱组件维护

Line drawing of a circular robotic vacuum cleaner with attached sensor and control panel (no text or symbols)

Simple line drawing of a faucet pouring water into a surface (no text or symbols)

冲洗及晾晒渗水抹布

Line drawing of a hand holding a small mechanical component, no text or symbols present

倒掉蓄水器中剩余的水分

Line drawing of a hand pressing a button on a device component (no text or symbols)

擦干水箱组件并晾干

5.4滚刷组件维护

Diagram of a mechanical or electronic component with internal channels and directional arrows (no text or symbols)

打开滚刷盖组件

Diagram of a device interior showing a hand inserting or removing a component into a housing (no text or symbols visible)

取出滚刷轴，清理滚刷轴上杂物以及毛发。

SMART SWEEPING ROBOTS