LYP861D - Kitchen sink SMEG - Free user manual and instructions

Brand	Smeg
Model	LYP861D
Product Type	Kitchen sink
Material	Stainless steel
Number of Bowls	1
Drainer Position	Right
Overall Dimensions (W x D)	840 x 480 mm
Bowl Depth	10 mm (material thickness)
Stainless Steel Thickness	0.6 mm
Finishing	Pre-polished
Tap Hole	1 (35 mm diameter)
Drain Inclination	2°
Number of Fixing Clips	8
Gasket Type	Sealing paste
Installation Type	Standard (tabletop)
EAN Code	8017709251628
Included Accessories	Strainer, Siphon with dishwasher outlet, Fixing clips, Gasket
Not Included Accessories	Siphon for single bowl, Waste disposal units, Tap stabiliser
Waste Outlet Diameter	3 1/2 inches

Frequently Asked Questions - LYP861D SMEG

What are the overall dimensions of the Smeg LYP861D sink?

The overall dimensions are 840 mm in width and 480 mm in depth.

What material is the sink made of?

The sink is made of stainless steel with a thickness of 0.6 mm and a pre-polished finish.

How many bowls does the sink have?

It has a single bowl.

What accessories are included with the sink?

Included accessories are: strainer, siphon with dishwasher outlet connection, fixing clips, and sealing paste gasket.

Does the sink have a drainer?

Yes, the drainer is located on the right side of the sink.

What is the diameter of the waste outlet?

The waste outlet fits a standard 3 1/2 inch connection.

How many fixing clips are provided?

The sink comes with 8 standard fixing clips for installation.

What type of installation is recommended?

Standard tabletop installation is recommended.

Is the sink compatible with a dishwasher?

Yes, the included siphon has a dishwasher outlet connection, allowing easy dishwasher drain connection.

What is the EAN code of this product?

The EAN code is 8017709251628.

USER MANUAL LYP861D SMEG

Sink material Sink material Stainless steel

No. of bow IsNo. of bow Is 1

Draine rDraine r Right

EA N codeEA N code 8017709251628

Top-down view of a stainless steel kitchen sink with a circular drain and horizontal ventilation slots (no text or symbols)

Vestleitiss

Ae stheticAe sthetic Universale

68888

Omni

Johdaur

Stainless steel

iFinishing

Pre-polished

Bußdihöning try typepe

LogoLog o

Technical Refectures

ofmontleitcknoksss 0,6 mm

xFmerdepdhp(thrn)m) 8

réimsionsofstbé the 154x860x500 mm

qodu(ch(m)m)

t6utolimimension 840 x 480 mm

popo#d#m(m)m)

dendeumbautout 10 mm

roodius

Heigbinkohetop toß mm

Baseijsizeize 45 cm

Täpphöble 1

TaTpa hpohebbichienberte 35 mm

Dividingway width 40 mm

DraDeaimieclination 2°

G6skettype Sealing paste

NNoofadipis 8

Typeoofclips Standard

Accessories IncludedAccessories Included

Accessories for Accessories for Strainer, Siphon with installa tioninstalla tion dishwasher outlet connection, Fixing clips, Gasket

Not included accessories Not included accessories

37123712

Siphon single bowl sinks (dishwasher connection included)

KIT FD 075KIT FD 075

Waste disposal 0,75 HP, Motor: 1/2 horsepower, Fits all sinks with 3 1/2" waste outlet

RND1 VRND1 V

Rondò waste kit 1 bowl with standard overflow

KIT FD 0 5 0KIT FD 0 5 0

Waste disposal 0,5 HP, Motor: 1/2 horsepower, Fits all sinks with 3 1/2" waste outlet

KIT FD 100KIT FD 100

Waste disposal 1 HP, Motor: 1/2 horsepower, Fits all sinks with 3 1/2" waste outlet

ST A BM IXST A BM IX

Tap stabiliser

Symbols glossarySymbols glossary

Cupboard width required for sink installation Sink depth - depending on the model, the depth can be from 13 to 24,5

Standard installation: Traditional installation in tabletop, suitable for any kitchen sets

Benefit (TT) Benefit (TT)

One bowl One bowl

A single bowl for greater adaptability, capacity and space optimisation

DrainerDrainer

The drawer allows dishes, cutlery and kitchen utensils to be placed directly on the sink after washing: excess water can drain into the sink, allowing for natural drying

Tap holeTap hole

Possibility of having the tap hole for direct installation of the tap on the sink, for a larger and neater surface area