S10196162 - Server APC - Free user manual and instructions
Find the device manual for free S10196162 APC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Server |
| Brand | APC (Schneider Electric) |
| Model | S10196162 |
| Form Factor | Rackmount 1U |
| Dimensions (H x W x D) | 4.4 x 43.2 x 55.9 cm (1.75 x 17 x 22 inches) |
| Weight | 12.7 kg (28 lbs) |
| Power Supply | Dual redundant hot-pluggable 800W AC |
| Input Voltage | 100-240 VAC, 50/60 Hz |
| Cooling | 4 hot-swappable fans |
| Storage Drives | Up to 8x 2.5" SATA/SAS hot-swap bays |
| Mounting | Rackmount kit included (standard 19" rack) |
| Operating Temperature | 10°C to 35°C (50°F to 95°F) |
| Humidity | 20% to 80% non-condensing |
| Certifications | UL, CE, FCC Class A |
| Warranty | 3 years limited hardware warranty |
| Maintenance | Regular firmware updates, dust filter cleaning every 6 months |
| Cleaning | Use compressed air for fans and vents; avoid liquids |
| Safety | ESD wrist strap required during installation; ensure rack stability |
| Spare Parts | Hard drives, power supplies, fans, memory modules |
| Repairability | Tool-less access to internal components; field-replaceable units |
| General Information | Designed for enterprise data centers, supports virtualization and clustering |
Frequently Asked Questions - S10196162 APC
How do I set up the APC S10196162 server for the first time?
Mount the server in a rack, connect power and network cables, then power on. Follow the on-screen setup wizard to configure BIOS and operating system.
What type of memory does this server support?
It supports DDR4 ECC registered memory, up to 256 GB across 8 slots.
How can I reset the server to factory defaults?
Press the setup button on the front panel during boot to enter BIOS, then select 'Load Optimized Defaults'. Alternatively, use the IPMI web interface to reset.
What is the recommended maintenance schedule?
Clean dust filters every 6 months, check firmware updates quarterly, and replace failed drives immediately.
Which operating systems are compatible?
Compatible with Windows Server, Red Hat Enterprise Linux, Ubuntu Server, and VMware ESXi.
How do I replace a failed power supply?
Disconnect the power cord, press the latch to release the PSU, slide it out, and insert a new hot-swappable unit. No tools required.
What does the 'fault' LED on the front panel indicate?
It indicates a hardware issue, such as a failed drive, overheating, or power supply problem. Check the system logs via IPMI for details.
Can I use third-party drives in this server?
Yes, as long as they are standard 2.5-inch SATA or SAS drives with correct mounting. However, for best support, use APC-approved drives.
How do I update the firmware?
Download the latest firmware from the APC support website, then use the BIOS update utility or the IPMI web interface to flash.
What is the warranty period and how do I claim it?
The standard warranty is 3 years. To claim, contact APC support with your model and serial number. Warranty covers hardware defects but not accidental damage.
User questions about S10196162 APC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual S10196162 - APC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. S10196162 by APC.
