APBE550G-UK - Server APC - Free user manual and instructions
Find the device manual for free APBE550G-UK APC in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Uninterruptible Power Supply (UPS) |
| Model | APBE550G-UK |
| Brand | APC |
| VA Rating | 550 VA |
| Watt Rating | 330 W |
| Input Voltage | 230 V AC |
| Input Frequency | 50/60 Hz |
| Output Voltage | 230 V AC |
| Number of Outlets | 6 |
| Battery Type | Sealed Lead-Acid, replaceable |
| Battery Runtime (half load) | Approximately 12 minutes |
| Dimensions (H x W x D) | 230 x 85 x 165 mm |
| Weight | 4.5 kg |
| Surge Protection | Yes, 320 Joules |
| Automatic Voltage Regulation | No (basic model) |
| Indicators | LED status indicators |
| Operating Temperature | 0 to 40 °C |
| Battery Replacement Interval | 3 to 5 years |
| Warranty | 2 years |
Frequently Asked Questions - APBE550G-UK APC
What is the runtime of the APC APBE550G-UK at full load and half load?
At half load (165 W), the runtime is approximately 12 minutes. At full load (330 W), the runtime is about 3 minutes.
How do I replace the battery in my APC APBE550G-UK?
The battery is user-replaceable. Open the front panel, disconnect the battery connector, remove the old battery, insert the new one (APC RBC2 or equivalent), reconnect, and close the panel. Ensure the UPS is off and unplugged before replacing.
How many outlets does the APBE550G-UK have and are they surge protected?
It has 6 outlets, all with surge protection. Of these, 3 provide battery backup and surge protection, and 3 provide surge protection only.
Can I use the APBE550G-UK with a generator?
Yes, but the generator should provide stable voltage and frequency (230V, 50/60 Hz). The UPS may switch to battery mode when the generator power is unstable.
What does the LED status mean on the APBE550G-UK?
A green LED indicates normal operation. Flashing green means battery is charging. Red LED indicates a battery fault or overload. See the user manual for specific patterns.
How do I perform a self-test on the APBE550G-UK?
Press and hold the power button for about 2 seconds. The UPS will run a self-test, simulating a power outage to check the battery and inverter.
Is the APBE550G-UK compatible with PowerChute software?
Yes, it is compatible with APC PowerChute Personal Edition for automatic shutdown and monitoring via USB connection.
What should I do if the UPS beeps continuously?
Continuous beeping indicates a battery problem or overload. Check the load and reduce it if necessary. If the battery is old, replace it. Also ensure the battery connection is secure.
Can I mount the APBE550G-UK on a rack?
No, this model is designed for tower placement only. It has a foot stand and is not rack-mountable.
How do I clean the APC APBE550G-UK?
Unplug the UPS and use a dry cloth to wipe the exterior. Do not use liquids or solvents. Ensure the vents are free of dust.
User questions about APBE550G-UK APC
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Server in PDF format for free! Find your manual APBE550G-UK - APC and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. APBE550G-UK by APC.
