M62TX - Washing machine REX - Free user manual and instructions

Product Type	Front-loading washing machine
Model	Rex M62TX
Load Capacity	6 kg
Max Spin Speed	1200 rpm
Dimensions (W x H x D)	60 cm x 85 cm x 55 cm
Weight	70 kg
Power Supply	220-240 V, 50 Hz
Energy Class	A+++
Water Consumption	49 L per cycle (approx)
Noise Level (Wash/Spin)	52 dB / 76 dB
Main Functions	Cotton, Synthetics, Delicates, Quick 30min, Eco, Rinse & Spin, Drum Clean
Display	LED with remaining time, delay start
Detergent Dispenser	3-compartment: prewash, main wash, fabric softener
Safety Features	Child lock, anti-flood, unbalanced load detection, overfoam control
Maintenance	Clean filter regularly, descale every 3 months, clean drum with Drum Clean cycle
Spare Parts	Available: door seal, pump filter, belts, heating element, control board
Repairability Index	8.0 / 10 (based on user ratings)
Included Accessories	Inlet hose, user manual, warranty card
Installation	Free-standing, requires water and drain connection
Certifications	CE, WEEE, ENERGY STAR

Frequently Asked Questions - M62TX REX

How do I clean the filter on my Rex M62TX washing machine?

Locate the filter at the bottom right of the machine. Open the cover, place a towel to catch water, unscrew the filter counterclockwise, remove any debris, and rinse under running water. Ensure the filter is securely tightened before closing.

What should I do if the washing machine won't start?

Check if the door is properly closed, the child lock is deactivated, the water supply is turned on, and the machine is plugged in. Also, ensure the cycle selector is set to a valid program.

Why is my Rex M62TX making unusual noises during the spin cycle?

Unusual noises may be due to an unbalanced load, foreign objects (e.g., coins in the drum), or loose transport bolts not removed during installation. Pause the cycle, redistribute laundry, and inspect the drum.

How do I remove the transport bolts?

Using a wrench, unscrew the bolts at the back of the machine (usually 4 bolts). Pull out the plastic spacers. Cover the holes with the provided caps. It is essential to remove them before first use to prevent damage.

What is the maximum load capacity for cotton programs?

The Rex M62TX has a maximum load of 6 kg for cotton programs. Overloading may affect washing performance and cause excessive vibration.

How often should I run a drum clean cycle?

It is recommended to run the Drum Clean cycle every 2-3 months to remove detergent residue and prevent odors. Use a machine cleaner or run at 90°C with no laundry.

What does error code 'E01' mean?

Error code E01 indicates a door lock issue. Ensure the door is fully closed and try turning the machine off and on. If the error persists, the door lock may need replacement.

Can I use liquid detergent in the Rex M62TX?

Yes, but pour liquid detergent into the correct compartment (marked with 'II' or 'Liquid') and use the provided liquid detergent cup if required. Do not overfill.

How do I clean the detergent drawer?

Press the release catch at the back of the drawer and pull it out. Rinse under warm water, clean the siphon cap, and wipe the inside of the compartment. Reinsert the drawer fully.

What should I do if water remains in the drum after a cycle?

This may indicate a blocked drain pump filter or kinked drain hose. Clean the filter first. If the problem persists, check the drain hose for obstructions and ensure it is not bent.

USER MANUAL M62TX REX

Line drawing of a front-loading washing machine (no text or symbols on the device body)

LAVABIANCHERIA

M42TX M62TX

M52TX M82TX

502

REX

INDICE

Pagina 3 Avvertenze

Technical line drawing of a mechanical component with two views (P81 and P82), showing internal cavity and mounting features without any text or symbols.

Line drawing of a washing machine connected to a funnel and a water pump (no text or symbols)

Illustration showing two different electrical installation methods: one using a faucet, the other using an electrical socket (no text or symbols present)

USO DEI DETERSIVI E DEGLI ADDITIVI

Line drawing of a hand holding a mechanical component with no visible text or symbols

Two technical diagrams showing a child's torso and hand placing a component into a device (no text or symbols present)

Two technical diagrams showing a person using a ring and a hand placing a component into a box, labeled P20 and P21 (no text or symbols on the figures themselves)

Two-step diagram showing hand positioning of a mechanical component on a tray, with arrows indicating movement direction (no text or symbols)

Line drawing of a hand using a tool to clean or inspect a component (no text or symbols visible)

Illustration showing a hand holding a square object and a button being placed into a box, with no visible text or symbols.

Illustration showing two different methods of cleaning a surface, one using a tool and the other pouring liquid into a pipe (no text or symbols present)

Togliete il filtro.