OL290 - Laminator Wallner - Free user manual and instructions

Product Type	Pouch Laminator
Brand	Wallner
Model	OL290
Laminating Width	Up to 230 mm (A4)
Laminating Speed	300 mm/min
Warm-Up Time	3–5 minutes
Temperature Settings	Cold and hot (2 settings)
Max Pouch Thickness	250 microns per side
Dimensions (W x D x H)	380 x 180 x 110 mm
Weight	1.5 kg
Power Supply	220-240 V, 50/60 Hz, 120 W
Main Functions	Hot lamination for photos and documents, cold lamination for heat-sensitive items
Maintenance	Clean rollers with isopropyl alcohol and a soft cloth after use
Safety Features	Auto shut-off after 30 minutes of inactivity, overheat protection
Spare Parts & Repairability	Replacement rollers and power cord available; user-replaceable fuses
General Information	Designed for home and office use; compatible with standard laminating pouches

Frequently Asked Questions - OL290 Wallner

What type of laminating pouches can I use with the Wallner OL290?

You can use standard A4 laminating pouches up to 250 microns per side. Both hot and cold pouches are compatible.

How do I switch between hot and cold lamination?

Use the temperature selector switch on the device. Set to 'Hot' for regular lamination or 'Cold' for heat-sensitive items like photos or tickets.

Why is my laminator not heating up?

Ensure the power cord is firmly connected and the power switch is on. The warm-up time is typically 3–5 minutes. If it still doesn't heat, check the fuse.

Can I laminate items thicker than 250 microns?

No, using pouches thicker than recommended may cause jamming or damage to the rollers. Stick to 80–250 micron pouches.

How do I clean the rollers?

Unplug the laminator, let it cool, then wipe the rollers with a soft cloth lightly dampened with isopropyl alcohol. Do not use abrasive cleaners.

What should I do if a pouch gets stuck?

Turn off and unplug the laminator. Carefully pull the pouch straight out while the rollers are still warm (but not hot). If stuck, use the release lever if available.

Does the laminator have an automatic shut-off?

Yes, the Wallner OL290 features an auto shut-off after 30 minutes of inactivity to save energy and prevent overheating.

Can I use it with a voltage converter?

The device is designed for 220-240 V. If your local voltage differs, use a suitable step-up/step-down converter with the correct wattage.

What warranty does the product have?

Wallner typically offers a 2-year warranty against manufacturing defects. Keep your proof of purchase for any claims.

Where can I find replacement parts?

Replacement parts such as rollers and power cords can be ordered through Wallner's customer service or authorized dealers. Check the manual for part numbers.

USER MANUAL OL290 Wallner

Black wallnet device with perforated grille and control buttons (no visible text or symbols on body)

OZNACZENIA BEZPIECZEŃSTWA

UWAGA

HOT! May cause physical injury or harm. Keep off touching or direct collision on body.

1. ON/OFF switch: It is to switch on or off the power supply
2. HOT/COLD switch: It is to choose cold or hot lamination
3. RED LED: Reffering that the power is well connected; if the the HOT/COLD switch is in HOT position, it means laminator is in pre-heating process; if in COLD position, it means the laminator is ready to laminate
4. GREEN LED: Ready for Hot lamination
5. RELEASE/REVERSE: Jam release button

ELECTRICAL APPLICATION

Apply for use only on proper electric power usage as indicated in rating plate on laminator. Keep on easy plugging and unplugging situation.

1. It is normal that new laminator could smell irritated in beginning, please keep fluent air ventilation before using.
2. Place laminator on table leaving enough space for the laminated object to access and come out from the laminator smoothly.

HOT LAMINATION

1. HOT Lamination: Turn the switch to „HOT“ and wait until the GREEN light READY illuminates, which means warm up is completed and laminator is ready to use. To stabilize the thermal conditions and increase lamination quality, please wait a few minutes after the READY diode will light up before you start laminating the document. Normal papers or laminating pouches from 80 microns to 125 microns, can be proceeded on this stage.
2. We suggest to turn the switch to OFF for 30 minutes and cool the laminator after HOT lamination for 30 minutes, then start the new HOT lamination.
3. Press the switch to „OFF“ and when not in use for safety precaution.

COLD LAMINATION

1. Cold lamination is at its best performance for cabinet temperature less than 35^ C( 95^ F); this machine will not generate heat on the cold lamination stage, please keep machine temp under 35^ C( 95^ F).
2. Use the cold lamination pouches only.
3. Cold lamination is for fax paper, light sensitive photos and other papers / documents that will be affected by heat.
4. Turn the switch to „COLD" position then insert the papers into cold lamination pouch

then start the cold lamination.

1. If the cold lamination is after the „HOT“ lamination, please turn the switch to „COLD“ to cool the machine; and wait for 30 minutes then cold lamination could be proceeded.

JAM RELEASE BUTTON

Due to the situation of necessary termination during lamination or paper jam, keep pressing on the RELEASE / REVERSE button and pull out the laminated pouches at the same time, then start the new lamination.

IMPORTANT NOTES

1. Select the rightful size of lamination pouch to use as inadequacy to fully cover the laminating material can cause laminator jam or damage.
2. Not applicable for one side lamination only.
3. Sensitive paper as fax paper or its similar material can only be proceed with „COLD" lamination mode.
4. Do not laminate exceeding the maximum thickness of 0.5mm. Laminating pouch from 80-125 microns (3-6 mils.) can be used to laminate the standard DIN A4 70gsm paper but suggest to use only the 80 microns pouch for laminating thicker papers or photos.
5. Regular maintenance of laminator rollers by use of the specialized cleaning paper can lessen laminator jam occurrence.
6. When the laminated material happens to get stuck during the lamination process, which is unable to be pulled out by RELEASE / REVERSE Button, avoid the dangerous attempt of trying to open or dismantle the machine by your own.
7. The machine does not require any maintenance or adjustment. Please do not attempt to take out the machine casing by yourself. If unusual problem occurs, please contact our after-sales service centers for the proper repair.
8. The socket-outlet shall be installed near the equipment and shall be easily accessible.
9. If wearing a tie or long necklace, use caution to keep these items away from opening.

DEFECTS

In case of any defects, laminating machine should be delivered to the seller or authorized service together with the warranty and damage description. Equipment should be secured with proper packaging (preferably original carton box). The seller does not take responsibility for any consequences of transporting equipment not properly packed.

SAFETY INSTRUCTIONS:

1. Please, read manual carefully.
2. Make sure that electric cable does not interfere with usual office traffic.
3. When removing the cover, be careful to avoid electric shock.
4. Do not use machine when it is wet.
5. Unplug power supply, when equipment is not in use.
6. Do not cover ventilation duct when equipment is in use.
7. Do not touch ventilation duct when the equipment is in use.

© ARGO S.A. www.argo.pl

1. Do not insert any objects into the ventilation duct.

2. Before lamination please check if the plug or the electric cable are not damage.

3. Do not laminate close to flammable substances.

4. Do not use force during the process of lamination.

5. Documents with sharp edges and unproper thickness can demage rollers.
6. Warrning! Documents may be very hot right after the process of lamination. Wait till they cool off.
7. Do not use canned air on shredder. Never use aerosol, petroleum based or other flammable products on or near shredder.
8. When, according to the temperature limits in point 4.5.4 of the EN 60950-1:2006 norm, the risk of burning due to overpassing those limits appears, on the machine's casing is placed a warning: UWAGA! GORĄCA POWIERZCHNIA NIE DOTYKAĆ or symbol

SPECIFICATIONS

Model Wallner OL290
Applicable Laminating Pouch 80-125 mic
Power Supply 220-240V 50HZ 1A
Laminating Speed 300 mm/min
Laminating Width 232 mm
Dimensions (LxDxH) 380x160x36	mm

NOTE ON ENVIRONMENTAL PROTECTION:

After the implementation of the European Directive 2002/96/EU in the national legal system, the following applies: Electrical and electronic devices may not be disposed of with domestic waste.

Consumers are obliged by law to return electrical and electronic devices at the end of their service lives to the public collecting points set up for this purpose or

point of sale. Details to this are defined by the national law of the respective country. This symbol on the product, the instruction manual or the package indicates that a product is subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices, you are making an important contribution to protecting our environment.

RoHS