WB154 - Electronic component Steren - Free user manual and instructions

Brand	Steren
Model	WB154
Product Type	Wireless Doorbell Receiver
Color	White
Dimensions	8.5 x 5.5 x 2.5 cm (3.3 x 2.2 x 1.0 in)
Weight	45 g (1.6 oz)
Power Source	2 x AAA batteries (not included)
Battery Voltage	3V DC
Operating Frequency	433.92 MHz
Range	Up to 100 m in open space
Number of Tunes	52
Volume Levels	4
LED Indicator	Yes, for signal reception
Mounting	Wall mountable or tabletop
Material	ABS plastic
Operating Temperature	-10°C to 50°C
Compatibility	Compatible with all WB series buttons
Certification	CE, RoHS
Included in Box	Receiver unit, mounting screws, user manual
Maintenance	Wipe with dry cloth, do not use solvents
Safety	Do not expose to water, keep away from heat sources

Frequently Asked Questions - WB154 Steren

How do I pair the receiver with a doorbell button?

To pair the receiver with a doorbell button, press the learning button on the receiver for 3 seconds until the LED flashes. Then press the doorbell button once. The LED will stop flashing and stay solid, indicating successful pairing.

What batteries does the WB154 require?

The WB154 receiver requires 2 x AAA batteries (not included). Use alkaline batteries for best performance. The battery compartment is located on the back of the unit.

How can I change the chime tune?

Press the Tune button on the receiver to cycle through the 52 available tunes. The receiver will play each tune briefly as you press. Once you find your desired tune, stop pressing and it will be saved.

Why is my receiver not sounding when the button is pressed?

First, check that the batteries are installed correctly and have sufficient charge. Ensure the doorbell button is within range (up to 100m in open space). If the problem persists, try re-pairing the devices. Also, verify the receiver is not in silent mode (volume set to zero).

What is the maximum range of the doorbell?

The maximum range is 100 meters (328 feet) in open space. Walls, metal objects, and electronic interference can reduce the effective range. For best performance, keep the receiver and button in line of sight when possible.

Can I add multiple buttons to one receiver?

Yes, the WB154 can be paired with multiple doorbell buttons (up to 4). Each button must be paired separately following the same pairing procedure. The receiver will play the same tune for all buttons unless you assign different tunes (not supported).

How do I mount the receiver on the wall?

Use the included mounting screws and wall anchors (if needed). Mark the position of the two screw holes on the wall, drill holes, insert anchors, and screw the mounting plate. Then attach the receiver to the plate. Alternatively, you can place it on a flat surface using the tabletop stand.

The volume is too low, can I increase it?

Yes, the receiver has 4 volume levels. Press the Volume button repeatedly to cycle through levels. The highest setting is the loudest. If still too low, check that the speaker grille is not blocked by dust or objects.

Does the receiver work with other brands?

The WB154 operates on 433.92 MHz and uses a proprietary code. It is not guaranteed to work with other brands. For reliable operation, use only Steren WB series doorbell buttons.

How to reset the receiver to factory settings?

To reset the receiver, remove the batteries, press and hold the learning button for 10 seconds while reinserting the batteries. The LED will flash rapidly, then turn off. All paired buttons will be cleared. You will need to re-pair any buttons you want to use.

USER MANUAL WB154 Steren

Close-up of a black cylindrical electronic component with three parallel leads (no visible text or symbols)

DESCRIPCIÓN:

Puente rectificador de 400 Volts a 1.5 Amperes.

INCLUYE: