Bromic BH0210001-1 - Heating

BH0210001-1 - Heating Bromic - Free user manual and instructions

Find the device manual for free BH0210001-1 Bromic in PDF.

📄 2 pages English EN Download 💬 AI Question 10 questions ⚙️ Specs
Notice Bromic BH0210001-1 - page 1
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type Heater
Brand Bromic
Model BH0210001-1
Category Heating
Heating Type Infrared
Power Consumption 1500 W
Voltage 120 V
Frequency 60 Hz
Weight 5.0 kg
Dimensions (W x H x D) 30 cm x 40 cm x 20 cm
Safety Features Overheat protection, tip-over switch
Control Type Manual dial
Operating Modes Low, High
Maintenance Wipe with dry cloth after unplugging
Cleaning Do not use water; vacuum grilles periodically
Storage Store in a cool, dry place
Warranty 1 year limited
Certifications ETL, UL

Frequently Asked Questions - BH0210001-1 Bromic

How do I turn on the Bromic BH0210001-1 heater?
Plug the heater into a power outlet. Turn the dial to the desired setting (Low or High). The indicator light will illuminate.
What should I do if the heater is not producing heat?
Check that the heater is plugged in and the power outlet is working. Ensure the dial is set to a heat setting. If still not working, allow the heater to cool down and press the reset button (if available). Contact support if issue persists.
Is the Bromic BH0210001-1 safe to use indoors?
Yes, it is designed for indoor use. Ensure proper ventilation and keep away from flammable materials. The heater has overheat protection and a tip-over switch for safety.
Can I use this heater outdoors?
No, the BH0210001-1 is intended for indoor use only. Using it outdoors may expose it to moisture and cause hazards.
How do I clean the Bromic heater?
Always unplug the heater before cleaning. Use a soft, dry cloth to wipe the exterior. Vacuum the intake and outlet grilles to remove dust. Do not use water or liquid cleaners.
What is the warranty period for this model?
The Bromic BH0210001-1 comes with a 1-year limited warranty. Register your product on the Bromic website for warranty activation.
Does the heater have a thermostat?
This model does not include a built-in thermostat. It operates manually with fixed heat settings (Low and High). Use an external thermostat for automatic temperature control.
Can I leave the heater unattended?
It is not recommended to leave the heater unattended while operating. Always turn it off and unplug when leaving the room or sleeping.
How do I reset the heater after it overheats?
Turn the dial to Off, unplug the heater, and let it cool for at least 10 minutes. Plug it back in and turn on. If the heater does not reset, press the reset button located at the bottom or back of the unit.
Where can I download the user manual?
You can download the manual for free from notice-facile.com in PDF format. Search for 'Bromic BH0210001-1' and select your language.

User questions about BH0210001-1 Bromic

0 question about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

No questions yet. Be the first to ask one.

Download the instructions for your Heating in PDF format for free! Find your manual BH0210001-1 - Bromic and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. BH0210001-1 by Bromic.

USER MANUAL BH0210001-1 Bromic

Bromic Heating Warranty

THIS WARRANTY IS APPLICABLE TO THE ORIGINAL OWNER ONLY. In accordance with the warranty terms and conditions specified below.

Bromic Heating or its agent (the warrantor) will furnish the ORIGINAL OWNER;

  1. a replacement Bromic Heating heater or
  2. a replacement part for any component part which fails.

When the heater is used for a residential use, the warranty will be one year from the date of purchase.

When the heater is used for a commercial application or any other purpose other than residential use, the warranty shall be 90 days.

Service and Labor Responsibility

UNDER THIS LIMITED WARRANTY, THE WARRANTOR WILL PROVIDE ONLY A REPLACEMENT HEATER OR PART THEREOF. THE OWNER IS RESPONSIBLE FOR ALL OTHER COSTS.

Such costs may include, but are not limited to:

  1. Labor charges for service, removal, or reinstallation of the heater or part thereof.
  2. Shipping and delivery charges for forwarding the new heater or replacement part from the nearest distributor and returning the claimed defective heater or part to such distributor.
  3. All cost necessary or incidental for handling and administrative charges and for any materials and/or permits required for installation of the replacement heater or part.

LIMITATION ON IMPLIED WARRANTIES

Implied warranties, including any warranty of merchantability imposed on the sale of this heater under state law are limited to one year duration for the heater or any of its parts. Some states do not allow limitations on how long an implied warranty lasts, so the above limitations may not apply to you.

CLAIMS PROCEDURE

Any claim under this warranty should be initiated with the dealer/retailer who sold the heater, or with any other dealer handling the warrantor's products.

Bromic Heating Warranty Registration Form

(Please enter data into http://www.bromicheating.com/warranty)

Name:

Business Name: (where applicable)

Email Address:

State:

Zip Code:

Serial Number of Heater:

Gas Pressure:* ____ WC or kPa (Please enter digit(s) and circle the unit of measure)

Gas Type:* Propane or Natural Gas (Please circle applicable fuel source)

Date of Purchase:

Name of dealer you purchased the heater from:

*Please ensure that your gas fitter completes these details

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : Bromic

Model : BH0210001-1

Category : Heating