VD-500AE V6 - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free VD-500AE V6 Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | IP Security Camera |
| Model | VD-500AE V6 |
| Brand | Brickcom |
| Resolution | 5 Megapixels (2592 x 1944) |
| Lens | Fixed focal lens, 4mm |
| Night Vision | Yes, up to 30 meters |
| Power Supply | PoE (IEEE 802.3af) or 12V DC |
| Dimensions (W x H x D) | 70 mm x 70 mm x 120 mm |
| Weight | 480 g |
| Operating Temperature | -10°C to 50°C |
| IP Rating | IP66 (weatherproof) |
| Video Compression | H.265, H.264, MJPEG |
| Frame Rate | Up to 30 fps at 5MP |
| Motion Detection | Yes, configurable zones |
| Audio | Built-in microphone, audio line in/out |
| Network Interface | 10/100 Mbps Ethernet (RJ45) |
| Protocols | IPv4, IPv6, TCP/IP, UDP, HTTP, HTTPS, RTSP, ONVIF |
| Storage | MicroSD card slot (up to 128 GB), NAS, NVR |
| Mounting | Wall or ceiling mount (bracket included) |
| Ingress Protection | IP66, IK10 (vandal resistant) |
| Compliance | CE, FCC, RoHS |
Frequently Asked Questions - VD-500AE V6 Brickcom
How do I reset the Brickcom VD-500AE V6 camera to factory defaults?
Press and hold the reset button (located on the side) for about 10 seconds until the LED flashes. The camera will restart with factory settings.
What is the default IP address of the camera?
The default IP is 192.168.1.168. You can find it using the Brickcom IP Finder tool on the included CD.
How can I access the camera remotely?
Ensure the camera is connected to your network with internet access. Use the Brickcom DDNS service or port forwarding on your router. Then access via web browser or the Brickcom app.
Does the camera support ONVIF?
Yes, the VD-500AE V6 is ONVIF compliant (Profile S), allowing integration with third-party NVRs and software.
What is the maximum microSD card size supported?
The camera supports microSD cards up to 128 GB for local recording. Use Class 10 or higher for best performance.
Can I use the camera outdoors?
Yes, it has an IP66 weatherproof rating, meaning it is dust-tight and protected against heavy rain. Suitable for outdoor use.
How do I enable motion detection alerts?
Log into the camera's web interface, go to Events > Motion Detect, enable it, and set detection zones and sensitivity. Configure email or FTP alerts in the same section.
What is the field of view of the lens?
The 4mm fixed lens provides a horizontal field of view of approximately 80 degrees.
How can I update the firmware?
Download the latest firmware from the Brickcom support website. Log into the camera, go to Maintenance > Firmware Upgrade, and upload the file. Do not power off during upgrade.
The camera is not showing any video. What should I check?
Verify Ethernet cable connection and PoE power. Ensure the camera is on the same subnet as your computer. Use the IP Finder tool to locate it. Check if the lens cap is removed.
User questions about VD-500AE V6 Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual VD-500AE V6 - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VD-500AE V6 by Brickcom.