FD-502Ae - Security Camera Brickcom - Free user manual and instructions
Find the device manual for free FD-502Ae Brickcom in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Brickcom |
| Model | FD-502Ae |
| Image Sensor | 1/3" Progressive CMOS |
| Resolution | 2 Megapixels (1920x1080) |
| Lens Type | Fixed, 3.6mm F1.8 |
| Field of View | Horizontal: 70°, Vertical: 50° |
| Night Vision | IR LEDs, up to 20 meters |
| Power | PoE (IEEE 802.3af) or 12V DC |
| Power Consumption | Max 5W |
| Dimensions (Diameter x Height) | 105 mm x 85 mm |
| Weight | 300 g (without bracket) |
| Video Compression | H.264, MJPEG |
| Audio | Two-way audio (built-in microphone and speaker) |
| Storage | MicroSD card (up to 64 GB), NVR |
| Network Interface | 10/100 Mbps Ethernet |
| Protocols | IPv4, HTTP, RTSP, ONVIF |
| Operating Temperature | -10°C to 50°C |
| Weatherproof Rating | IP66 (outdoor use) |
| Mounting | Wall or ceiling mounting bracket included |
| Security | Password protection, HTTPS encryption |
| Certifications | CE, FCC |
Frequently Asked Questions - FD-502Ae Brickcom
How do I reset the Brickcom FD-502Ae to factory defaults?
To reset the camera, locate the reset button (usually a small hole on the back). Press and hold it for about 10 seconds using a paperclip while the camera is powered on. The camera will reboot and restore default settings.
What is the default IP address and login for the FD-502Ae?
The default IP address is typically 192.168.1.100. The default username and password are both 'admin'. It is recommended to change these after first login for security.
Can I view the camera remotely on my smartphone?
Yes, the FD-502Ae supports mobile viewing via the Brickcom View app (available for iOS and Android). You can also access the camera via a web browser using its IP address.
How do I update the firmware on the FD-502Ae?
Download the latest firmware from Brickcom's official website. Access the camera's web interface, go to 'System' > 'Maintenance', and upload the firmware file. Do not power off during the update.
What type of storage does the FD-502Ae support for recording?
The camera supports local storage via a MicroSD card (up to 64 GB) and can also record to an NVR (Network Video Recorder) that supports ONVIF.
Does the FD-502Ae have two-way audio?
Yes, the camera is equipped with a built-in microphone and speaker, allowing you to listen and speak through the camera using the mobile app or web interface.
What is the night vision range of the FD-502Ae?
The infrared night vision range is up to 20 meters, allowing clear monitoring in complete darkness.
Is the FD-502Ae suitable for outdoor use?
Yes, the camera has an IP66 weatherproof rating, making it resistant to dust and water jets. It can be used outdoors in various weather conditions.
How do I mount the FD-502Ae camera?
The camera comes with a mounting bracket suitable for wall or ceiling installation. Use the included screws and anchors to secure the bracket, then attach the camera and adjust the angle.
What protocols does the FD-502Ae support for integration?
The camera supports ONVIF Profile S, RTSP, and HTTP, making it compatible with many third-party NVRs and video management systems.
User questions about FD-502Ae Brickcom
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FD-502Ae - Brickcom and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FD-502Ae by Brickcom.