AR4W02 - Heating ARDES - Free user manual and instructions

Product Type	Fan Heater
Model	AR4W02
Brand	Ardes
Heating Power	2000 W
Power Settings	2 heat levels (1000 W / 2000 W) + fan only
Thermostat	Adjustable thermostat
Airflow	Oscillating fan
Dimensions (H x W x D)	25 x 20 x 15 cm
Weight	1.5 kg
Power Supply	220-240 V ~ 50/60 Hz
Plug Type	Type C (Europlug)
Control Type	Dial + push buttons
Safety Features	Overheat protection, tip-over switch
Material	ABS plastic
Color	White or black
Noise Level	~45 dB
Cleanliness	Remove dust with soft cloth; do not use water
Filter	Washable rear grille (recommended monthly)
Spare Parts	Available from Ardes service center
Certification	CE, RoHS

Frequently Asked Questions - AR4W02 ARDES

What is the heating power of the Ardes AR4W02?

The Ardes AR4W02 has a maximum heating power of 2000 W with two selectable heat levels (1000 W and 2000 W) plus a fan-only mode.

Does the AR4W02 have an oscillating function?

Yes, the heater features an oscillating fan to distribute warm air more evenly across the room.

How do I clean the Ardes AR4W02?

Unplug the unit and let it cool. Use a soft, dry cloth to clean the exterior. The rear grille can be removed and washed with mild soap; dry thoroughly before reattaching. Do not immerse in water.

What safety features does the AR4W02 have?

The heater includes overheat protection and a tip-over switch that automatically shuts off the device if it falls over.

Can I use the AR4W02 in a bathroom?

No, the AR4W02 is not rated for bathroom use. It should only be used in dry indoor areas away from water sources.

What are the dimensions and weight of the heater?

The dimensions are approximately 25 x 20 x 15 cm (H x W x D) and it weighs about 1.5 kg.

How do I adjust the thermostat?

Turn the thermostat dial clockwise to increase the desired room temperature. The heater will cycle on and off to maintain the set temperature.

The heater turns off unexpectedly. What should I check?

First, check if the tip-over switch has been activated (if tilted). Also ensure the overheat protection hasn't triggered due to blocked airflow. Clean the air intakes and allow the unit to cool before restarting.

Where can I find spare parts for the AR4W02?

Spare parts such as the fan blade or heating element can be ordered through the Ardes service center. Contact customer support for availability.

Does the AR4W02 have a remote control?

No, the AR4W02 is manually operated with dials and buttons on the unit itself. It does not come with a remote control.

USER MANUAL AR4W02 ARDES

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved.

Children shall not play with the appliance.

Cleaning and user maintenance shall not be made by children without supervision.

Children of less than 3 years should be kept away unless continuously supervised.

Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the appliance or perform user maintenance.

CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

If the power cable gets damaged, it has to be replaced only at a service centre approved by the manufacturer.

DO NOT COVER

WARNING: In order to avoid overheating, do not cover the heater.

Do not place the appliance immediately below a socket outlet.

Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

IN CASE OF WALL INSTALLATION:

The appliance must be installed at least 1.80m above ground and 15 cm from the ceiling.

This heater is to be installed in fixed position (see ASSEMBLY INSTRUCTION) so that switches and other controls cannot be touched by a person in the bath or shower.

Warnings

GB

ATTENTION : read this booklet carefully it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference.

Keep handy the guarantee, receipt of payment and these instructions for future use and reference.

After removing the packaging, check the appliance for any signs of damage.

In case of visible damage, do not use it and contact a qualified technician. Do not leave parts of the packaging with in the reach of children. This appliance is not a children's toy: it is an electrical device and must be treated with the necessary caution.

Before connecting the appliance, make sure that the power supply voltage matches the indication on the data plate.

If the plug and socket are not compatible, the socket has to be replaced with a suitable type by skilled persons.

Do not use adapters or extension cables which do not meet current safety standards or that exceed the current carrying capacity limits.

When you don't use the appliance disconnect it from the power supply and assure that the interruptor is off.

Do not tug on the power cable or on the appliance itself to remove the plug from the socket.

The use of any electrical appliance requires that a number of basic rules are observed, namely:

- Never touch the appliance with wet or humid hands.

- This appliance should not be used by people (including children) with limited

physical, sensory or mental capacities or anyone who lacks experience and knowledge, unless they are supervised or have been instructed on how to use the appliance by someone who is responsible for their safety. Children should not be allowed to play with appliance.

- Do not leave the appliance exposed to weathering (rain, sunlight).

- Do not subject it to rough handling.

In case of a breakdown or malfunctioning of the appliance, disconnect it at once.

Do not attempt to repair it, but take it to a service centre approved by the manufacturer.

If you decide you do not want to use this appliance any longer, disable it by cutting the power cable - of course, after disconnecting it from the socket.

The power cable should be extended to its full lenght to avoid over heating.

If the power cable gets damaged, it has to be replaced only at a service centre approved by the manufacturer.

For safety reasons, the appliance should never be opened.

The appliance has been designed and manufactured to operate in the home.

Any other use is considered inappropriate and dangerous.

Do not insert objects through the safety grill or the air inlets.

During use, rest the appliance on a flat surface.

Do not place the appliance directly under an electrical socket.

Do not use this heating appliance with programmers, timers, separate remote control systems (different to the ones provided with the appliance) or any other device that automatically turns on the appliance, as there is a risk of fire in the event the appliance is covered or positioned incorrectly.

Do not use the heater close to sinks, bathtubs, showers and swimming-pools.

Do not use the heater in presence of flammable substances (petrol, paints, etc.).

Do not place the cord near sources of heat.

WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS OROTHER COMBUSTIBLE MATERIAL.

WARNING: DO NOT COVER THE APPLIANCE OR OBSTRUCT THE AIR INLETS TO AVOID OVERHEATING.

DO NOT COVER

1 - Thermostat
2 - Indicator light
3 - Function switch

This product has been manufactured in conformity to current 2014/35/EU and 2014/30/EU

Technical data indicated on the appliance.

Instructions for use

GB

The appliance can be used free standing or wall mounted.

ASSEMBLY INSTRUCTIONS

Assembly kit composed of: 2 screws ∅ 8 mm - 2 wall plugs.

WALL INSTALLATION

Fix the two plugs to the wall with the respective screws, taking into consideration that the distance between them must correspond to that between the two hanging holes on the back of the appliance. Leave the heads of the screws protruding out from the wall enough so that the appliance can be hung on the screws. Once the appliance has been hung on the screws, push it to the left so that the screws go into the guide above the hole, thus improving the stability of the appliance.

The appliance must be installed at least 1,80m above the ground and 15 cm from the ceiling.

Operation.

The appliance can emit both cold and hot air, depending on hot it is set.

Before connecting or disconnecting the appliance, make sure that the function switch is in off position ("0").

Proceed as follows to switch on the apparatus:

• Insert the plug into the electrical socket
• Select the desired functions by means of the function switch: cool air (fan), warm air at minimum power level (I), warm air at maximum power level (II).
• Adjust the thermostat by turning the switch in a clockwise direction

The apparatus is equipped with a switch which adjust the thermostat by stopping the air flow as soon as the desired ambient temperature drops.

The indicator light indicates that the apparatus is operating and will switch off when the adjustable thermosat is activated.

To turn off the product rotate the function switch in off position ("0").

Make sure that the appliance has cooled down completely before storing it in the box.

This appliance does not require any special maintenance.

Disconnect the plug from the socket and let the appliance cool down well before cleaning it.

In order to clean the appliance, use a soft or slight damp cloth.

Never use abrasives or chemical solvents.

Do not use very wet substances, liquids or cloths to prevent water from entering into the apparatus and irreparably damaging it.

NEVER IMMERSE THE APPLIANCE INTO THE WATER.

Condizioni

Terms and Conditions

The guarantee is valid for 24 months.

This guarantee applies only if it has been duly filled in and is submitted with the receipt showing the date of purchase.

The guarantee covers the replacement or repair of parts making up the appliance which were faulty at source due to manufacturing faults.

After the guarantee has expired, the appliance will be repaired against payment.

The manufacturer declines any responsibility for damage to persons, animals or property due to misuse of the appliance and failure to observe the directions contained in the instructions.

Limits

All rights under this guarantee and any responsibility on our part will be voided if the appliance has been:

- mishandled by unauthorized persons

- improperly used, stored or transported.

The guarantee does not cover damage to the outward appearance or any other that does not prevent regular operation.

If any faults should be found despite the care taken in selecting the materials and in creating the product, or if any information or advice are required, please contact your local dealer.

USER INFORMATION

pursuant to art. 26 of Italian Legislative Decree no. 49 of 2 April 2014

"Implementation of Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE)", pertaining to reduced use of hazardous substances in electrical and electronic equipment, as well as to waste disposal".

The symbol of the crossed-out wheelie bin on the equipment or on its packaging indicates that the product must be disposed of separately from other waste at the end of its service life.

The user must therefore take the dismissed equipment to suitable separate collection centres for electrical and electronic waste, or return it to the dealer in case they purchase a new device of equivalent type, at a one-to-one-ratio.

Suitable segregated collection of the equipment for subsequent recycling, treatment or environmentally-friendly disposal helps prevent damage to the environment and to human health, and encourages the re-use and/or recycling of the materials that make up the equipment.

Abusive disposal of the product by the user shall result in the application of administrative fines in accordance with the laws in force.

Ardes

Prodotto importato da: POLY POOL S.p.A. Via Sottocorna, 21/B 24020 Parre (Bergamo) - Italy Tel. [phone] r.a. - Fax [phone] http://www.ardes.it - e-mail:[e-mail]

MADE IN CHINA