Iconiq AR4P21B - Heating ARDES - Free user manual and instructions

Product type	Ceramic fan heater
Brand	ARDES
Model	Iconiq AR4P21B
Dimensions (L x D x H)	20 x 15 x 25 cm
Weight	1.5 kg
Power supply	230 V, 50 Hz
Maximum power	2000 W
Minimum power	1000 W
Power settings	2 levels (1000 W / 2000 W)
Heating type	PTC Ceramic
Adjustable thermostat	Yes, with knob
Oscillation	Yes, horizontal rotation
Fan only mode	Yes, cool air function
Timer	No
Remote control	No
Overheat protection	Yes, automatic shut-off
Tip-over protection	Yes, automatic shut-off
Operation indicator light	Yes, LED indicator
Noise level	45 dB (approximate)
Maintenance and cleaning	Unplug and wipe with a soft, dry cloth. Do not use abrasive products.
Spare parts and repairability	Contact ARDES customer service for spare parts. Repairs possible by an authorized professional.
General information	Device intended for domestic use. Do not cover. Maintain a safety distance of at least 1 meter.

Frequently Asked Questions - Iconiq AR4P21B ARDES

How to clean my ARDES Iconiq AR4P21B heater?

Unplug the device and wait for it to cool down. Use a soft, dry cloth to wipe the exterior. Never use abrasive products or water.

My heater turns off by itself. What should I do?

This is normal if the overheat protection is triggered. Make sure the air inlets are not blocked and the device is not too close to a wall. If the problem persists, check that it is not in a tilted position (tip-over protection).

How to adjust the temperature on the Iconiq AR4P21B?

Use the thermostat knob: turn it towards the hottest symbol to increase the temperature. The device will stop automatically when the room reaches the set temperature.

The fan continues to run after turning off the heater. Is this normal?

Yes, some models have a cooling function: the fan continues for a few moments to dissipate residual heat and protect the components.

Can I use the Iconiq AR4P21B in a bathroom?

No, this device is not designed for damp rooms. It must be used in a dry environment away from splashes.

How to activate the oscillation function?

Press the oscillation button (usually represented by a rotation icon). The device will start sweeping horizontally to distribute heat.

Why is the red light flashing?

A flashing light may indicate a safety fault: overheating or tipping. Check that the device is on a flat surface and that nothing blocks the air intake grille.

What is the maximum power of this heater?

The maximum power is 2000 W with two settings: 1000 W and 2000 W. Use the highest power for quick heating.

How to completely turn off the device?

Set the mode selector to '0' (off) and unplug the power cord. Never leave it plugged in unattended.

Where can I find spare parts for the Iconiq AR4P21B?

Contact ARDES after-sales service via their official website or your retailer. Do not attempt to repair the device yourself; contact an authorized professional.

USER MANUAL Iconiq AR4P21B ARDES

This product is only suitable for well insulated spaces or occasional use.

ATTENTION: read this booklet carefully it contains important instructions for a safe installation, use and maintenance. Important instructions to be kept for future reference.

• This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance.
• Cleaning and user maintenance shall not be made by children without supervision. Children of less than 3 years should be kept away unless continuously supervised.
• Children aged from 3 years and less than 8 years shall only switch on/off the appliance provided that it has been placed or installed in its intended normal operating position and they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children aged from 3 years and less than 8 years shall not plug in, regulate and clean the

appliance or perform user maintenance.

CAUTION — Some parts of this product can become very hot and cause burns. Particular attention has to be given where children and vulnerable people are present.

If the power cable gets damaged, it has to be replaced only at a service centre approved by the manufacturer in order to prevent any risks.

DO NOT COVER

WARNING: In order to avoid overheating, do not cover the heater.

Do not place the appliance immediately below a socketoutlet.

Do not use this heater in the immediate surroundings of a bath, a shower or a swimming pool.

Do not use this heater if it has been dropped.

Do not use if there are visible signs of damage to the heater.

Use this heater on a horizontal and stable surface.

- WARNING: Do not use this heater in small

rooms when they are occupied by persons not capable of leaving the room on their own, unless constant supervision is provided.

- WARNING: To reduce the risk of fire, keep textiles, curtains, or any other flammable material a minimum distance of 1 m from the air outlet.

Keep handy the guarantee, receipt of payment and these instructions for future use and reference.

After removing the packaging, check the appliance for any signs of damage.

In case of visible damage, do not use it and contact a qualified technician.

Do not leave parts of the packaging within the reach of children. This appliance is not a children's toy: it is an electrical device and must be treated with the necessary caution.

Before connecting the appliance, make sure that the power supply voltage matches the indication on the data plate.

If the plug and socket are not compatible, the socket has to be replaced with a suitable type by skilled persons.

Do not use adapters or extension cables which do not meet current safety standards or that exceed the current carrying capacity limits.

When you don't use the appliance, disconnect it from the power supply and assure that the switch is off.

Do not tug on the power cable or on the appliance itself to remove the plug from the socket.

The use of any electrical appliance requires that a number of basic rules are observed, namely:

- Never touch the appliance with wet or humid hands.

- Do not leave the appliance exposed to weathering (rain, sunlight).

- Do not subject it to rough handling.

In case of a breakdown or malfunctioning of the appliance, disconnect it at once.

Do not attempt to repair it, but take it to a service centre approved by the manufacturer.

If you decide you do not want to use this appliance any longer, disable it by cutting the power cable - of course, after disconnecting it from the socket.

The power cable should be extended to its full length to avoid overheating.

For safety reasons, the appliance should never be opened.

The appliance has been designed and manufactured to operate in the home.

Any other use is considered inappropriate and dangerous.

Do not insert objects through the safety grill or the air inlets.

During use, rest the appliance on a flat surface.

Do not use this heating appliance with programmers, timers, separate remote control systems (different to the ones provided with the appliance) or any other device that automatically turns on the appliance, as there is a risk of fire in the event the appliance is covered or positioned incorrectly.

Do not use the heater in presence of flammable substances (petrol, paints, etc.).

Do not place the cord near sources of heat.

WARNING: DO NOT COVER THIS PRODUCT NEAR CURTAINS OR OTHER COMBUSTIBLE MATERIAL.

WARNING: DO NOT COVER THE APPLIANCE OR OBSTRUCT THE AIR INLETS TO AVOID OVERHEATING.

GBTechni

1 - Handle

2 - Function switch

0 Off

Fan

I Minimum heating

II Maximum heating

3 - Adjustable thermostat

Technical data indicated on the appliance.

CE

The apparatus can emit both cold air and hot air depending upon the function selected by means of the function switch. Make sure that the function switch is in the OFF position before connecting or disconnecting the apparatus.

To turn the appliance on, insert the plug in the power outlet, set the operation switch in the desired position and turn the temperature switch clockwise to the maximum position.

Once the desired room temperature is reached, turn the handle slowly, in a counter clockwise direction, until the appliance is turned off.

At this point, the product will automatically restart when the temperature in the room goes below the set limit.

The indicator light indicates that the apparatus is operating and will switch off when the adjustable thermostat is activated.

Make sure that the apparatus has cooled down completely before storing it in the box.

Maintenance

GB

This appliance does not require any special maintenance.

Disconnect the plug from the socket and let the appliance cool down well before cleaning it.

In order to clean the appliance, use a soft or slightly damp cloth.

Never use abrasives or chemical solvents.

Do not use very wet substances, liquids or cloths to prevent water from entering into the apparatus and irreparably damaging it.

NEVER IMMERSE THE APPLIANCE INTO THE WATER.

Dust inside the appliance

Use a vacuum cleaner on the back grid.

PACKAGING

In order to respect the environment, packaging material must be disposed of properly in accordance with separate collection.

Check local regulations.

USER INFORMATION

Implementation of Directive 2012/19/EU on Waste Electrical and Electronic Equipment (WEEE), pertaining to reduced use of hazardous substances in electrical and electronic equipment, as well as to waste disposal.

The symbol of the crossed-out wheelie bin on the equipment or on its packaging indicates that the product must be disposed of separately from other waste at the end of its service life.

The user must therefore take the dismissed equipment to suitable separate collection centres for electrical and electronic waste.

For more details, please contact the appropriate local authority.

Suitable segregated collection of the equipment for subsequent recycling, treatment or environmentally-friendly disposal helps prevent damage to the environment and to human health, and encourages the re-use and/or recycling of the materials that make up the equipment.

Abusive disposal of the product by the user shall result in the application of administrative fines in accordance with the laws in force.

Terms and Conditions

The guarantee is valid for 24 months.

This guarantee applies only if it has been duly filled in and is submitted with the receipt showing the date of purchase.

The guarantee covers the replacement or repair of parts making up the appliance which were faulty at source due to manufacturing faults.

After the guarantee has expired, the appliance will be repaired against payment.

The manufacturer declines any responsibility for damage to persons, animals or property due to misuse of the appliance and failure to observe the directions contained in the instructions.

Limits

All rights under this guarantee and any responsibility on our part will be voided if the appliance has been:

- mishandled by unauthorized persons

- improperly used, stored or transported.

The guarantee does not cover damage to the outward appearance or any other that does not prevent regular operation.

If any faults should be found despite the care taken in selecting the materials and in creating the product, or if any information or advice are required, please contact your local dealer.

Information requirements for electric local space heaters

Model identifier(s): AR4P21W - AR4P21B
Item	Symbol	Value Unit		Item Unit
Heat output				Type of heat input, for electric storage local space heaters only (select one)
Nominal heat output	Pnom	1,5 kW		Manual heat charge control, with integrated thermostat	No
Minimum heat output (indicative)	Pmin	1,0 kW		Manual heat charge control with room and/or outdoor temperature feedback	No
Maximum continuous heat output	Pmax,c	1,5 kW		Electronic heat charge control with room and/or outdoor temperature feedback	No
Auxiliary electricity consumption				Fan assisted heat output No
At nominal heat output	eImax	N.A. kW		Type of heat output/room temperature control (select one)
At minimum heat output	eImin	N.A. kW		Single stage heat output and no room temperature control	No
In standby mode	eISB	N.A. kW		Two or more manual stages, no room temperature control	No
				With mechanic thermostat room temperature control	Yes
				With electronic room temperature control	No
				Electronic room temperature control plus day timer	No
				Electronic room temperature control plus week timer	No
				Other control options (multiple selections possible)
				Room temperature control, with presence detection	No
				Room temperature control, with open window detection	No
				With distance control option No
				With adaptive start control No
				With working time limitation No
				With black bulb sensor No
Contact details POLY POOL S.p.A. - via Sottocorna 21/B, 24020 Parre (BG) - Italy

ARDES, Guzzanti, Scarlett, Luxell, Graef

ČERTES spol. s r.o.

Donínská 83

463 34 Hrádek nad Nisou