GM86SDSB - Fridge LG - Free user manual and instructions
Find the device manual for free GM86SDSB LG in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Refrigerator |
| Brand | LG |
| Model | GM86SDSB |
| Total Capacity | 23 cu. ft. |
| Dimensions (H x W x D) | 68.9" x 32.8" x 34.0" |
| Weight | 210 lbs |
| Power Supply | 115V, 60Hz |
| Energy Star Certified | Yes |
| Cooling System | Smart Cooling System with Multi-Air Flow |
| Door Cooling+ | Yes |
| Ice Maker | Automatic Ice Maker (in freezer) |
| Water Filter | Replaceable LG LT800P |
| Control Type | Electronic Digital Display with Touch Controls |
| Child Lock | Yes |
| Door Alarm | Yes |
| Shelves Type | Tempered Glass Spill-Proof |
| Drawers | 2 Humidity-Controlled Crispers |
| Freezer Type | Bottom Freezer with Pull-Out Drawer |
| Defrost System | Auto Defrost in Refrigerator and Freezer |
| Cleaning | Clean condenser coils annually; wipe interior with mild soap |
| Warranty | 1 Year Parts and Labor, 5 Years Sealed System |
| Repairability / Parts | Water filter, ice maker, shelves, door bins, gaskets available |
Frequently Asked Questions - GM86SDSB LG
How do I change the water filter on my LG GM86SDSB?
Locate the water filter in the upper-right corner of the refrigerator compartment. Turn the filter 1/4 turn counterclockwise to release it. Insert the new LG LT800P filter and turn clockwise until it locks. Run 2-3 gallons of water through the dispenser to purge air.
Why is my LG refrigerator not cooling properly?
Check that the temperature settings are correct (refrigerator: 37°F, freezer: 0°F). Ensure the condenser coils are clean and free of dust. Verify that the door seals are tight. Allow 24 hours for temperature to stabilize after loading.
How do I activate Child Lock on my LG GM86SDSB?
Press and hold the 'Freezer' and 'Power Cool' buttons simultaneously for 3 seconds. The 'Lock' icon will appear on the display. To disable, repeat the same step.
What is the capacity of the LG GM86SDSB refrigerator?
The total capacity is 23 cubic feet, with approximately 16 cu. ft. in the refrigerator section and 7 cu. ft. in the freezer.
How often should I clean the condenser coils?
Clean the condenser coils every 6 months to maintain efficiency. Use a vacuum cleaner with a brush attachment to remove dust and debris. The coils are located behind the front grille at the bottom.
My ice maker is not producing ice. What should I do?
Ensure the ice maker is turned on in the settings. Check that the water line is connected and the water filter is not clogged. The freezer temperature should be at or below 0°F. Allow 24 hours after installation for ice production.
How do I adjust the temperature on my LG GM86SDSB?
Press the 'Refrigerator' or 'Freezer' button repeatedly to cycle through temperature settings. The recommended setting is 37°F (3°C) for the refrigerator and 0°F (-18°C) for the freezer.
What does the Door Alarm sound mean?
The Door Alarm sounds if a refrigerator or freezer door is left open for more than 60 seconds. Close the door to stop the alarm. If it persists, check for obstructions.
Where can I find the model and serial number?
The model and serial number label is located on the left side wall of the refrigerator compartment, near the top. It may also be on the back of the unit.
How do I replace the light bulb in my LG refrigerator?
The LG GM86SDSB uses LED lighting which is not user-replaceable. If the LED fails, contact LG customer service for assistance.
User questions about GM86SDSB LG
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Fridge in PDF format for free! Find your manual GM86SDSB - LG and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. GM86SDSB by LG.