SHP-1680F - Security Camera Hanwha - Free user manual and instructions
Find the device manual for free SHP-1680F Hanwha in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Security Camera |
| Brand | Hanwha |
| Model | SHP-1680F |
| Image Sensor | 1/2.8" Progressive CMOS |
| Resolution | 2 Megapixels (1920 x 1080) |
| Lens | Fixed, 2.8 mm, F1.6 |
| Night Vision | Up to 30 m (IR LED) |
| Field of View | Horizontal: 110°, Vertical: 60° |
| Power Supply | DC 12V, PoE (802.3af) |
| Power Consumption | Max 6.5W |
| Operating Temperature | -10°C to 50°C |
| Weight | Approx. 0.5 kg |
| Dimensions (W x H x D) | 150 x 120 x 100 mm |
| Weather Rating | IP66 (Outdoor) |
| Connectivity | Ethernet (RJ-45) |
| Storage | MicroSD slot up to 256 GB, NVR |
| Audio | Built-in microphone, speaker |
| Motion Detection | Yes, configurable zones |
| Alarm I/O | 1 Input, 1 Output |
| Software | Hanwha WiseNet, ONVIF compatible |
| Mounting | Wall or ceiling mount (bracket included) |
| Warranty | 2 years |
Frequently Asked Questions - SHP-1680F Hanwha
How do I connect the SHP-1680F camera to my network?
Connect the camera to your router or switch using an Ethernet cable. Ensure PoE is enabled on the switch or use the included DC 12V power adapter. The camera will obtain an IP address via DHCP automatically.
What is the default username and password for the camera?
The default username is admin and the password is 4321. It is strongly recommended to change the password upon first login for security.
How can I reset the camera to factory settings?
Press and hold the reset button on the camera (located near the Ethernet port) for about 10 seconds using a paperclip until the LED blinks rapidly. The camera will reboot with factory defaults.
Does the camera support Wi-Fi?
No, the Hanwha SHP-1680F is a wired camera and requires an Ethernet connection for power and data. It does not have Wi-Fi capabilities.
What is the maximum microSD card capacity supported?
The camera supports microSD cards up to 256 GB. Ensure the card is formatted as FAT32 or exFAT for compatibility.
How do I access the camera remotely?
After connecting to your network, use the Hanwha WiseNet Viewer software or a web browser to access the camera's IP address. Enable port forwarding on your router to view remotely, or set up a DDNS service.
Why is my camera not showing any video?
Check the Ethernet cable connection, ensure the camera is receiving power (PoE or DC adapter), and verify that the IP address is correct. Try rebooting the camera and your router. If using a browser, ensure the appropriate plugin is installed.
Can I use this camera outdoor without protection?
Yes, the SHP-1680F has an IP66 weather rating, meaning it is dust-tight and protected against heavy rain. It can be installed outdoors without an additional housing.
How do I clean the camera lens?
Use a soft, dry microfiber cloth to gently wipe the lens. For stubborn dirt, slightly dampen the cloth with water or lens cleaning solution. Avoid touching the lens with fingers.
Is the camera compatible with ONVIF?
Yes, the Hanwha SHP-1680F supports ONVIF Profile S, making it compatible with many third-party NVRs and software like Blue Iris, Synology Surveillance Station, and others.
User questions about SHP-1680F Hanwha
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual SHP-1680F - Hanwha and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SHP-1680F by Hanwha.