V4D 01 P (UK) - Tumble drier HOTPOINT - Free user manual and instructions
Find the device manual for free V4D 01 P (UK) HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Hotpoint |
| Model | V4D 01 P (UK) |
| Energy Class | B |
| Drum Capacity | 7 kg |
| Drying Programs | Cottons, Synthetics, Delicates, Mixed, Time Dry |
| Dimensions (H x W x D) | 85 cm x 60 cm x 60 cm |
| Weight | 35 kg |
| Power Supply | 230 V ~ 50 Hz |
| Noise Level | 65 dB(A) |
| Water Tank Capacity | 3.5 L |
| Filter Type | Lint filter (door and condenser) |
| Reverse Tumble | Yes |
| Cool Down Phase | Yes |
| Child Lock | No |
| Delay Start | Yes (up to 24 h) |
| Condenser Clean Indicator | Yes |
| Installation Type | Vented or Condenser (condenser type) |
| Spare Parts Availability | Filter, belt, door switch, heating element |
| Repairability Index | 7.4 / 10 |
Frequently Asked Questions - V4D 01 P (UK) HOTPOINT
How do I clean the lint filter?
Open the door and pull out the lint filter from the door sill. Rinse under running water and dry thoroughly before replacing. Clean after each cycle to maintain efficiency.
What should I do if the dryer stops during a cycle?
Check if the water tank is full (empty it), the lint filter is clogged (clean it), or the condenser needs cleaning. If the problem persists, refer to the manual or contact support.
Can I dry all fabric types in this dryer?
No. Avoid drying items with flammable substances, wool (unless labeled), silk, or delicate fabrics that may shrink. Use appropriate program for each fabric type.
How often should I clean the condenser?
Clean the condenser every 10-12 cycles or when the Condenser Clean indicator lights up. Remove it from the bottom of the dryer and rinse with water.
Why is my dryer taking longer to dry clothes?
Possible causes: overloaded drum, clogged lint filter, full water tank, or blocked condenser. Also ensure room temperature is above 5°C.
How do I select the correct drying program?
Refer to the garment care labels. Use Cottons for cotton fabrics, Synthetics for polyester/nylon, Delicates for gentle drying, and Time Dry for timed cycles.
Where should I install the dryer?
Place on a level floor in a well-ventilated area. Leave at least 5 cm clearance on sides and rear. Avoid direct sunlight or damp rooms.
What does the 'Clean Condenser' indicator mean?
It indicates that the condenser needs cleaning. Failure to do so may reduce drying performance and increase energy consumption.
Is it normal for the dryer to be noisy?
Some noise is normal (drum rotation, fan). However, loud banging or rattling may indicate loose items in the drum or unbalanced load. Stop the cycle and redistribute clothes.
How do I empty the water tank?
Pull out the water tank located at the bottom right of the dryer. Open the cap and pour water into a sink. Replace and push back until it clicks.
User questions about V4D 01 P (UK) HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual V4D 01 P (UK) - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. V4D 01 P (UK) by HOTPOINT.