TVFM70BGG - Tumble drier HOTPOINT - Free user manual and instructions
Find the device manual for free TVFM70BGG HOTPOINT in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | Hotpoint |
| Model | TVFM70BGG |
| Capacity | 7 kg |
| Drying Type | Condenser |
| Energy Class | B |
| Height (cm) | 85 |
| Width (cm) | 60 |
| Depth (cm) | 60 |
| Weight (kg) | 40 |
| Voltage | 220-240 V ~ 50 Hz |
| Power Consumption (kWh/cycle) | 2.5 |
| Noise Level (dB) | 65 |
| Number of Programs | 15 |
| Delay Start (hours) | Up to 24 |
| Lint Filter Indicator | Yes |
| Water Tank Indicator | Yes |
| Control Type | Electronic with LED Display |
| Door Reversible | Yes |
| Child Lock | Yes |
| Drum Material | Stainless Steel |
| Installation Type | Freestanding |
| Color | White |
| Warranty (years) | 2 |
Frequently Asked Questions - TVFM70BGG HOTPOINT
How do I clean the lint filter?
Open the door and pull the lint filter out from the bottom of the door opening. Remove the lint by hand or using a soft brush. Rinse under running water if needed, dry it, and reinsert. Clean the filter after every cycle to maintain efficiency.
How do I empty the water tank?
Pull out the water tank from the bottom right corner, open the cap, and pour the condensed water into a sink. Replace the cap and slide the tank back in. The Water Tank Full indicator will notify you when it needs emptying.
What does the 'Clean Filter' indicator mean?
This indicator lights up when the lint filter is clogged. Clean the filter immediately to ensure good airflow and shorter drying times.
Why is my dryer taking too long to dry clothes?
Common causes: a clogged lint filter, full water tank, selected program too long, or overloaded drum. Check and clean the filter, empty the tank, reduce load size, and ensure you use the correct program for the fabric type.
Can I install this dryer in a small room?
Yes, it is a condenser dryer that does not require an external vent. Ensure the room is well-ventilated (door or window slightly open) to avoid moisture buildup. Leave at least 5 cm clearance on all sides.
How can I reduce energy consumption?
Spin clothes at high speed in the washing machine before drying, clean the lint filter regularly, avoid overloading, and use the Eco program or sensor drying programs that stop when clothes are dry.
What does the 'Water Tank Full' indicator mean?
This means the condensed water tank is full and must be emptied. The dryer may pause until the tank is emptied and replaced. Empty the tank after each cycle to avoid interruption.
Can I reverse the door opening direction?
Yes, the door is reversible. Refer to the instruction manual for step-by-step instructions. Typically, you need to unscrew the door hinges, swap the door stopper, and reattach the door on the opposite side. Be careful not to damage the door seal.
My dryer stops mid-cycle – what should I do?
First, check if the Water Tank Full indicator is on (empty the tank). If not, check the lint filter and empty it. Ensure the load is not too large. If the problem persists, the dryer may have overheated; allow it to cool down for 30 minutes before restarting.
What programs are available on this dryer?
Common programs include: Cotton, Synthetics, Mix, Delicates, Wool, Shirts, Bed & Bath, Sport, Jeans, Rapid 30 min, Time Dry, Cool Air, and Eco. Refer to the program chart in the manual for specific load sizes and temperatures.
User questions about TVFM70BGG HOTPOINT
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual TVFM70BGG - HOTPOINT and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. TVFM70BGG by HOTPOINT.