FD816B-HF2 - Security Camera Vivotek - Free user manual and instructions
Find the device manual for free FD816B-HF2 Vivotek in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Dome Camera |
| Brand | Vivotek |
| Model | FD816B-HF2 |
| Dimensions | 110 mm (dia) x 90 mm (H) |
| Weight | 300 g |
| Power Supply | PoE (IEEE 802.3af) |
| Resolution | 2 MP (1920 x 1080) |
| Lens | Fixed, 3.6 mm, F1.8 |
| Day/Night | Yes (IR cut filter) |
| IR Distance | Up to 15 m |
| Wide Dynamic Range | Progressive Scan, WDR Pro |
| Compression | H.264, MJPEG |
| Frame Rate | 30 fps at 1080p |
| Network Protocol | IPv4, IPv6, TCP/IP, HTTP, HTTPS, etc. |
| Security Features | Multi-level password, IP filtering, HTTPS encryption |
| Ingress Protection | IP66 (outdoor rated) |
| Operating Temperature | -20°C to 50°C |
| Maintenance | Clean housing and lens with a soft dry cloth |
| Spare Parts & Repairability | Accessories and repairs available via Vivotek service centers |
| General Information | Fixed dome indoor/outdoor IP camera with remote viewing |
Frequently Asked Questions - FD816B-HF2 Vivotek
How do I factory reset the Vivotek FD816B-HF2 camera?
Press and hold the reset button (located on the cable or inside the dome) for 10 seconds while the camera is powered on. The camera will reboot to default settings.
How can I access the camera remotely?
Assign a static IP via the camera's web interface, then forward ports (e.g., 80, 554) on your router. Use the Vivotek mobile app or web browser with the public IP address.
What cables are required for installation?
An Ethernet cable with PoE (Power over Ethernet) connection is sufficient for both data and power. If PoE is not available, use a 12V DC power adapter (sold separately).
How do I mount the camera on a ceiling or wall?
Use the included mounting bracket. Mark drilling points for screws, install the bracket, attach the camera base, and adjust the viewing angle as needed.
How to set up motion detection?
Log into the camera web interface, go to 'Event Settings' > 'Motion Detection'. Enable it, draw detection zones, adjust sensitivity (0-100%), and configure actions like recording or email alerts.
Does the camera support an external microphone?
Yes, the FD816B-HF2 has a built-in microphone and a terminal block for external audio input. Audio is transmitted over the network in G.711 codec.
What storage options are available?
The camera supports microSD card (up to 128 GB) for local recording, as well as network attached storage (NAS) and Vivotek's NVR software for centralized recording.
How do I update the firmware?
Download the latest firmware from Vivotek's website. In the camera web interface, go to 'System' > 'Firmware Upgrade' and upload the file. Do not power off during update.
What should I do if the camera shows no image?
Check Ethernet connection and PoE status. Verify IP addressing (use Vivotek's IP Finder tool). If using a browser, ensure ActiveX or plugins are enabled. Reset the camera if needed.
Is this camera compatible with third-party NVRs?
Yes, it supports ONVIF (Profile S) and RTSP standards, making it compatible with many third-party NVR systems, including Synology, Hikvision, and others.
User questions about FD816B-HF2 Vivotek
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Security Camera in PDF format for free! Find your manual FD816B-HF2 - Vivotek and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. FD816B-HF2 by Vivotek.