V-9934 - Microphone Valcom - Free user manual and instructions

Product Type	Remote Microphone for V-9933A
Dimensions	1.50" H x 2.90" W x 0.81" D (3.81 cm x 7.37 cm x 2.06 cm)
Weight	1.0 oz (0.03 kg)
Power Source	Phantom powered from V-9933A; no external power supply required
Function	Provides remote noise sensing for the V-9933A Noise Sensing Volume Control
Microphone Type	Self-contained microphone with pre-amplifier
Connections	Screw terminals
Maximum Units per V-9933A	Up to 4 units can be paralleled
Maximum Wire Run	1000 feet per unit
Recommended Cable	CAT3/5/5e/6 twisted pair telephone cable (one pair)
Mounting Type	Wall mount
Mounting Height	12-15 feet in the noise area
Installation Notes	Front must not be obstructed; avoid placement near HVAC blowers, fans, conveyors
Warranty	1 year limited warranty from date of shipment
Repair Service	Not field repairable; return to Valcom for service
Technical Support	Phone: [phone]; Website: http://www.valcom.com
Included Accessories	None specified (unit only)

Frequently Asked Questions - V-9934 Valcom

What is the Valcom V-9934 used for?

The V-9934 is a remote microphone designed for use with the V-9933A Noise Sensing Volume Control. It provides remote noise sensing to adjust audio levels based on ambient noise.

How is the V-9934 powered?

The V-9934 is phantom powered through the V-9933A control. No separate power supply is needed.

What type of cable is recommended for wiring the V-9934?

Use CAT3/5/5e/6 twisted pair telephone cable (one pair).

How many V-9934 units can be connected to one V-9933A?

Up to four V-9934 units can be paralleled on a single V-9933A.

What is the maximum wire run for a V-9934?

Each V-9934 can be on a wire run up to 1000 feet.

Where should the V-9934 be mounted?

Mount it on a wall in the noisy area at a height of 12-15 feet. Ensure the front is not obstructed and avoid placing it near HVAC blowers, ceiling fans, or conveyors.

Does the V-9934 require any maintenance?

The unit has no user-serviceable parts and is not field repairable. Keep the front unobstructed for proper operation.

What should I do if the V-9934 is not working?

Check connections to the V-9933A. For further assistance, contact Valcom Technical Support at [phone], having a VOM and telephone test set available.

How do I return a defective V-9934 for repair?

Attach a tag with your company name, address, phone number, contact person, and problem description. Ship the unit to: Valcom, Inc., Repair and Return Dept., 5614 Hollins Road, Roanoke, VA 24019-5056.

What is the warranty on the V-9934?

Valcom provides a one-year limited warranty from shipment against defects in materials and workmanship under normal use. It does not cover damage from misuse, alteration, or unauthorized repair.

USER MANUAL V-9934 Valcom

The V-9934 is a Remote Microphone for use with the V-9933A, Noise Sensing Volume Control.

SPECIFICATIONS

Purpose

The V-9934 provides remote noise sensing for the V-9933A.

Features

• Self-contained microphone and pre-amp
- Phantom powered; no power supply required
- Screw terminal connections
- Up to four units may be paralleled on one V-9933A
• Each V-9934 may be on a 1000' wire run
- Uses CAT3/5/5e/6 twisted pair telephone cable (One pair)

Dimensions/Weight

• 1.50" H x 2.90" W x .81" D
(3.81cm H x 7.37cm W x 2.06cm D)
• 1.0 oz. (.03 kg)

Mounting

The V-9934 is designed for wall mounting. When mounting this unit in a noisy area, make sure that the front is not obstructed in any way. It should be mounted in the noisy area 12-15 feet high. Care should be taken not to mount the V-9934 directly adjacent to any noise sources such as HVAC blowers, ceiling fans, conveyors, etc.

Wiring Diagram

TECHNICAL ASSISTANCE

When trouble is reported, verify connections to the V-9933A.

Assistance in troubleshooting is available from the factory. When calling, you should have a VOM and a telephone test set available and be calling from the job site. Call [phone] for Technical Support, or visit our website at http://www.valcom.com.

facilities in Roanoke, VA. Should repairs be necessary, attach a tag to the unit clearly stating your company name, address, phone number, contact person and the nature of the problem. Send the unit to:

Valcom, Inc.

Repair and Return Dept.

5614 Hollins Road

Roanoke, VA 24019-5056

The V-9934 is not field repairable. Valcom equipment contains no user serviceable parts inside. Valcom, Inc. maintains service

VALCOM LIMITED WARRANTY

Valcom, Inc. warrants its products to be free from defects in materials and workmanship under conditions of normal use and service for a period of one year from the date of shipment. The obligation under this warranty shall be limited to the replacement, repair or refund of any such defective device within the warranty period, provided that:

1. inspection by Valcom, Inc. indicates the validity of the claim;
2. the defect is not the result of damage, misuse or negligence after the original shipment;
3. the product has not been altered in any way or repaired by others and that factory sealed units are unopened (A service charge plus parts and labor will be applied to units defaced or physically damaged);
4. freight charges for the return of products to Valcom are prepaid;
5. all units 'out of warranty' are subject to a service charge. The service charge will cover minor repairs (Major repairs will be subject to additional charges for parts and labor).

This warranty is in lieu of and excludes all other warranties, expressed or implied, and in no event shall Valcom, Inc. be liable for any anticipated profits, consequential damages, loss of time or other losses incurred by the buyer in connection with the purchase, operation or use of the product.

This warranty specifically excludes damage incurred in shipment. In the event a product is received in damaged condition, the carrier should be notified immediately. Claims for such damage should be filed with the carrier involved in accordance with the F.O.B. point.

Headquarters:

Valcom, Inc.

5614 Hollins Road

Roanoke, VA 24019-5056

Phone: [phone]

FAX: [phone]