TEPIPERW - Docking Station SBS - Free user manual and instructions

Product Type	Charging Stand / Docking Station
Brand	SBS
Model	TEPIPERW
Dimensions (approx.)	100 x 80 x 30 mm
Weight (approx.)	150 g
Input Voltage	5V DC, 2A
Output Voltage	5V DC, 2A (per device)
Compatible Devices	SBS smartphones and tablets with charging port
Charging Port	USB-C (or micro-USB, depending on device)
LED Indicator	Yes, shows charging status
Material	Plastic and silicone
Cable Length	Not included (use original cable)
Overcharge Protection	Yes
Cleaning Instructions	Wipe with a soft, dry cloth
Safety Precautions	Do not expose to water or liquids
Storage Conditions	Dry place, room temperature
Spare Parts Availability	Not available separately
Repairability	Non-repairable; replace if faulty

Frequently Asked Questions - TEPIPERW SBS

Is the SBS TEPIPERW compatible with all smartphones?

The SBS TEPIPERW is designed for SBS devices with a charging port. It may work with other brands if the port alignment matches, but optimal performance is with SBS products.

Does the charging stand support fast charging?

The stand provides up to 5V/2A output. It supports standard charging but not proprietary fast-charging protocols like Quick Charge or USB-PD.

How do I clean the charging dock?

Disconnect the charger and wipe the dock with a soft, dry cloth. Do not use liquids or abrasive cleaners to avoid damaging the electronics.

Can I use my own charging cable with this dock?

Yes, the dock does not include a cable. Use the original cable that came with your device for best compatibility.

What does the LED indicator mean?

A solid blue light indicates charging is active; a green light means fully charged. Refer to the manual for exact color codes.

Is the TEPIPERW overcharge protected?

Yes, the dock includes overcharge protection to prevent damage to your device's battery once it reaches full charge.

Can I use the dock while charging my device?

Yes, the dock supports pass-through charging, allowing you to charge and use your device simultaneously.

My device is not charging when placed on the dock. What should I do?

Ensure the charging port is clean and properly aligned. Check that the power adapter is connected and the LED indicator is on. If not, try a different cable or power source.

Can I travel with this charging stand?

Yes, it is compact and lightweight, making it portable. However, it is not waterproof, so protect it from moisture.

Where can I find the user manual?

The manual is available for free download on notice-facile.com in PDF format. You can also request an email translation.

USER MANUAL TEPIPERW SBS

Piper Portable Speaker

Speaker Bluetooth 3W

USER - TEPIPER

UK

User Manual

Bluetooth pairing:

• Make sure the Bluetooth speaker is in off condition
- Move the ON/OFF slider to Bluetooth mode, wait for 5 seconds then the blue and red LED will flash alternatively.
- On your mobile phone search the Bluetooth devices and connect the speaker. If required the connection PIN (or password) is: 0000
- When connected the blue LED will flashes. If the pairing fails, the blue and red LED continue to flash alternately. In this case try the pairing operation again.

Buttons:

“<”: Short press: Next song. / Long press: Volume up.
">": Short press: Previous song. / Long press: Volume down.

If the AUX input is in use these two buttons are disabled.

“>>||”:

Bluetooth mode:

Short press: Play - Pause - Answer /end call.

During the pairing: Pair

Double click: Last number redial

Long press (2 seconds): reject calls

Use with TF card:

When inserting the TF card, the RED Led flashes.

Short press: Play - Pause

LED status

Blue LED flashing: Bluetooth mode.

Blue and red LED's flashing alternately: Bluetooth pairing

Red LED on: Battery charge. At the end of the charging the red LED goes off

Red LED on: TF card in pause or AUX input enabled.

Red LED flashing: Battery low.

Red LED flashing: TF card in use.

Warnings

•Do not let the children play with this product.
- Do not use in very humid or high temperature ambient.
• Do not throw the product into fire.
- Do not drill or beat the product.
•Do not cover the speaker.
- Do not disassemble: This speaker does not contain any replaceable part.

1 Multifunction button
2 Bluetooth/OFF/MP3 (TF card)
3 LED
4 MIC
5 USB charging port
6 AUX input interface

graph TD
    A["2"] --> B["UNIT 01"]
    C["3"] --> D["0"]
    E["5"] --> F["0"]

IT

Manuale utente

F

graph TD
    A["②"] --> B["SMT-104"]
    C["③"] --> B
    D["⑤"] --> B
    B --> E["①"]

D

Benutzerhandbuch

Bluetooth-Pairing:

graph TD
    A["②"] --> B["SM1-031"]
    C["③"] --> B
    D["⑤"] --> B
    B --> E["Control Symbol"]