KIA  - Automotive

- Automotive KIA - Free user manual and instructions

Find the device manual for free KIA in PDF.

📄 420 pages English EN Download 💬 AI Question 12 questions ⚙️ Specs
Notice KIA  - page 418
View the manual : Français FR English EN
Pick your language and provide your email: we'll send you a specifically translated version.
Product Type KIA Automobile
Covered Models 5-door, 5-door Station Wagon, 3-door
Overall length (5-door) 4260 mm
Overall width 1790 mm
Overall height (5-door) 1480 mm
Wheelbase 2650 mm
Fuel tank capacity 53 liters
Recommended fuel (gasoline) Unleaded, research octane number 95 RON minimum
Recommended fuel (diesel) Diesel conforming to EN 590, cetane index 52-54
Engine oil (gasoline 1.4/1.6L) API SL/SM, ACEA A3 or higher, 3.3 L
Engine oil (diesel 2.0L with DPF) ACEA C3, 6.7 L
Tire pressure (normal load) Front 2.2 bar, Rear 2.2 bar (depending on size)
Tire dimensions 185/65R15, 195/65R15, 205/55R16, 225/45R17
Braking Hydraulic braking system with ABS, ESC (depending on version)
Passive safety Front, side, curtain airbags; pretensioner seat belts; active headrests
Child safety ISOFIX anchors and top tether anchorages at rear outboard seats
Routine maintenance Engine oil change, oil filter, air filter, fuel filter (diesel), cabin filter
Interior cleaning Use mild soap for fabric and vinyl, avoid bleach
Break-in period First 1000 km: accelerate gently, engine speed <3000 rpm, avoid constant speeds
Warranty Manufacturer's warranty according to warranty and maintenance booklet

Frequently Asked Questions - KIA

What type of fuel to use in a KIA gasoline engine?
Use unleaded gasoline with a research octane number of at least 95 RON. Leaded gasoline is prohibited and can damage the catalytic converter.
Can I use biodiesel in my KIA diesel?
Biodiesel blends up to 5% (B5) conforming to EN 14214 are allowed. Higher content can damage the engine and void the warranty.
How to properly adjust the seat belt?
The lap belt should be placed as low as possible on the hips, the shoulder belt across the middle of the shoulder. Use the height adjustment of the anchor for an optimal fit.
Where to install a child seat?
Always on the rear seat. Never install a rear-facing seat on the front passenger seat. Use ISOFIX anchors or the three-point seatbelt according to the manufacturer's instructions.
What to do if the airbag warning light stays on?
If the SRS indicator does not turn off about 6 seconds after starting or comes on while driving, have the system checked by an authorized KIA dealer. This indicates a potential malfunction.
What is the recommended tire pressure?
For normal load (up to 2 people), the cold pressure is 2.2 bar (32 psi) front and rear, depending on tire size. Check the label on the driver's side center pillar.
How to maintain the DPF (diesel particulate filter) system?
Drive regularly at a speed above 60 km/h for about 25 minutes if the warning light flashes. If the problem persists, consult a dealer.
Can I tow a trailer with my KIA?
Yes, but avoid towing during the first 2000 kilometers (break-in). Follow the towing capacities indicated in the manual and use an approved hitch.
How to clean the vehicle interior?
Use a vacuum for fabrics and a mild cleaner for vinyl. For seat belts, use mild soap and water. Avoid bleach and solvents.
What to do in case of engine overheating?
Stop the vehicle safely, turn off the engine and wait for it to cool. Do not remove the radiator cap while the engine is hot. Refer to the 'What to do in an emergency' section of the manual.

User questions about KIA

2 questions about this device. Answer the ones you know or ask your own.

Ask a new question about this device

The email remains private: it is only used to notify you if someone responds to your question.

How to identify the daytime running lights (DRL) fuse on a Kia car if no fuse is explicitly labeled DRL?
Frequently Asked Questions - 08/03/2026
Response Notice-Facile

On Kia vehicles, the fuse protecting the daytime running lights (DRL) is located in the interior fuse box, located under the driver’s control panel. Although it is not labeled solely as “DRL,” it is identified as “DRL OFF” with a rating of 10A. This fuse directly protects the daytime running light system.

To locate this fuse, open the cover of the fuse panel on the driver’s side. Refer to the label on the box (usually visible inside the cover) that lists all the fuses with their positions and ratings. The “DRL OFF” 10A fuse is specifically dedicated to the daytime running lights and is distinct from the standard exterior lighting fuses (headlights, fog lights).

If you need to disable the daytime running lights, you can insert a spare fuse in the “DRL OFF” location. If the DRLs are not functioning, check that this 10A fuse is not blown. A charred or broken fuse indicates a failure in the DRL circuit.

When replacing, always use a fuse of the same rating (10A). Other fuses in the interior box include those for the windshield wipers, headlights, seat heating, and other electrical systems. The fuse box in the engine compartment contains the power fuses for the engine and main systems.

Respond (be the first)
How to troubleshoot a problem with the daytime running lights (DRL) on a 2012 Kia Rio?
Frequently Asked Questions - 08/03/2026
Response Notice-Facile

The daytime running lights (DRL) are essential for safety by improving the visibility of your vehicle. If you are experiencing a problem with the DRL on your 2012 Kia Rio, here are several steps to follow to identify and resolve this malfunction:

1. Check the daytime running light fuse

  • Locate the fuse box of your vehicle (often under the dashboard or in the engine compartment).
  • Identify the fuse corresponding to the daytime running lights using the diagram on the cover or in the technical documentation.
  • Check if the fuse is blown and replace it with a fuse of the same amperage if necessary.

2. Inspect the DRL bulbs

  • Check that the daytime running light bulbs are not defective or blown.
  • Replace any defective bulb with one suitable for your Kia Rio model.

3. Check the electrical connections

  • Examine the wires and connectors of the daytime running lights for any signs of corrosion, looseness, or damage.
  • Clean the contacts if necessary and ensure that the connections are secure.

4. Check the headlight switch

  • Make sure that the headlight switch is positioned correctly to activate the daytime running lights.
  • Test the different positions to see if the DRL turn on.

5. Electronic diagnosis

If the previous steps do not resolve the issue, it is possible that an electronic malfunction is at fault:

  • A diagnosis with a specialized tool can identify a failure of the light control module or a software issue.
  • In this case, it is advisable to consult a professional or a Kia service center.

By following these tips, you can often resolve issues related to the daytime running lights of your 2012 Kia Rio yourself, or at least better understand the nature of the problem before seeking professional assistance.

Respond (be the first)

Download the instructions for your Automotive in PDF format for free! Find your manual - KIA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. by KIA.

USER MANUAL KIA

The Power to Surprise

KIA - 1

MANUEL DU CONDUCTEUR

Action

Maintenance

Spécifications

Position air recycle

KIA - Position air recycle - 1

CLASS 1 LASER PRODUCT

ATTENTION

Notes relatives aux iPod

A AVERTISSEMENT

Informations traffic (TA)

Audio/Video Remote Control Profile (AVRCP)

N (Neutral/Point mort)

9~11 kg.m (65~79 liv.pied)

Liquide lave-glace 7-44

Manual assistant
Powered by Anthropic
Waiting for your message
Product information

Brand : KIA

Model :

Category : Automotive