ITP120 - Measuring instrument FLUKE - Free user manual and instructions
Find the device manual for free ITP120 FLUKE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Temperature Probe |
| Sensor Type | Type K Thermocouple |
| Measurement Range | -40°C to 260°C (-40°F to 500°F) |
| Accuracy | ±0.5°C (from 0°C to 100°C) |
| Resolution | 0.1°C / 0.1°F |
| Connector Type | Mini Type K (flat pin) |
| Cable Length | 1 m (39.4 in) |
| Probe Material | Stainless Steel |
| Probe Diameter | 3.2 mm (0.125 in) |
| Probe Length | 150 mm (5.9 in) |
| Weight | 30 g (1.06 oz) |
| Operating Temperature | -10°C to 50°C (14°F to 122°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Compatibility | Fluke 11X, 17X, 28II series multimeters with temperature function |
| Primary Function | Contact temperature measurement of surfaces, liquids, and air |
| Maintenance | Wipe with a damp cloth; do not immerse in liquid |
| Safety Precautions | Do not exceed temperature limits; avoid contact with live circuits |
| Spare Parts | Not applicable; probe is non-serviceable |
| Warranty | 1 year limited warranty |
| Certifications | CE, UKCA |
Frequently Asked Questions - ITP120 FLUKE
What type of thermocouple does the Fluke ITP120 use?
The Fluke ITP120 uses a Type K thermocouple (NiCr/NiAl) for accurate temperature measurements.
What is the temperature measurement range of the ITP120?
The ITP120 measures temperatures from -40°C to 260°C (-40°F to 500°F).
Can the ITP120 be used to measure liquid temperatures?
Yes, the ITP120 can measure liquid temperatures as long as the probe tip is fully immersed and the liquid is within the specified temperature range.
How do I connect the ITP120 to my Fluke multimeter?
Insert the mini Type K connector into the corresponding temperature input on your Fluke multimeter. Ensure the multimeter is set to the temperature measurement mode.
What is the accuracy of the ITP120?
The accuracy is ±0.5°C (from 0°C to 100°C) and ±0.75% of reading for the remaining range (excluding sensor error).
Is the ITP120 compatible with non-Fluke multimeters?
The ITP120 uses a standard mini Type K connector and is compatible with most multimeters that accept Type K thermocouples, but accuracy may vary.
How do I clean and maintain the ITP120?
Clean the probe with a soft, damp cloth. Do not submerge the connector or cable in any liquid. Store in a dry place when not in use.
What safety precautions should I observe when using the ITP120?
Avoid touching the probe tip during or immediately after measurements as it may be hot. Do not use the probe near live electrical circuits to prevent shock.
Can I use the ITP120 to measure air temperature?
Yes, the ITP120 can measure air temperature, but for best results, ensure the probe is exposed to the air stream and not shielded.
What is the cable length of the ITP120?
The cable length is 1 meter (39.4 inches), providing flexibility for remote measurements.
User questions about ITP120 FLUKE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Measuring instrument in PDF format for free! Find your manual ITP120 - FLUKE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. ITP120 by FLUKE.