DBXR463GDCC - Tumble drier GE - Free user manual and instructions
Find the device manual for free DBXR463GDCC GE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Tumble Dryer |
| Brand | GE |
| Model | DBXR463GDCC |
| Capacity | 7.0 cu. ft. |
| Dimensions (W x D x H) | 27 x 28 x 38 inches |
| Weight | 120 lbs |
| Power Supply | 240V / 30A / 60Hz |
| Energy Source | Electric |
| Drying Cycles | Automatic, Timed, Air Fluff, Delicates, Heavy Duty |
| Temperature Settings | High, Medium, Low, No Heat |
| Drying Technology | Sensor Dry |
| Lint Filter Location | Door opening |
| Control Type | Dial and Push Button |
| Drum Material | Stainless Steel |
| Door Swing | Reversible |
| Exhaust Duct | 4-inch diameter, rear or side venting |
| Approximate Annual Energy Consumption | 608 kWh |
| Noise Level | 65 dB |
| Safety Features | Thermal fuse, door switch, lint filter indicator |
| Cleaning | Clean lint filter after each load; clean drum with mild detergent |
Frequently Asked Questions - DBXR463GDCC GE
How do I clean the lint filter?
Remove the lint filter from the door opening and wipe away lint with your hand or a soft brush. Rinse with water if needed and dry thoroughly before replacing. Clean after every load to maintain efficiency and safety.
What should I do if the dryer doesn't start?
Check that the dryer is plugged in and the circuit breaker is not tripped. Ensure the door is fully closed and the start button is pressed. Also verify that the timer is set to a drying cycle.
How often should I clean the exhaust duct?
Clean the exhaust duct at least once a year to prevent lint buildup and reduce fire risk. Disconnect the duct and use a vacuum or lint brush to remove debris.
Can I reverse the door opening direction?
Yes, the door is reversible. Refer to the manual for instructions on moving the door hinge and latch to the opposite side. You will need a screwdriver and a few common tools.
What is the capacity of the DBXR463GDCC?
The dryer has a 7.0 cubic foot capacity, suitable for large loads such as king-size bedding or up to 15 towels per cycle.
Why is my dryer taking too long to dry?
Check the lint filter for blockage, ensure the exhaust duct is not kinked or clogged, and verify the load is not too large. Using the Timed Dry cycle may help if Sensor Dry is not working.
Does this dryer require venting?
Yes, it is a vented dryer. It must be connected to an exterior exhaust duct to remove moist air. Do not use indoors without proper venting.
What electrical requirements does the dryer have?
The dryer requires a 240V, 30A, 60Hz dedicated circuit with a NEMA 14-30 outlet. Use a 4-prong power cord (sold separately) unless local codes allow a 3-prong.
How do I use the Sensor Dry cycles?
Select the Sensor Dry cycle based on fabric type. The dryer automatically stops when the desired moisture level is reached. Do not overfill the drum for best results.
Where can I find the model and serial number?
The model and serial number are located on the rating plate inside the door frame or on the back panel. Keep this information for service or parts ordering.
User questions about DBXR463GDCC GE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Tumble drier in PDF format for free! Find your manual DBXR463GDCC - GE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. DBXR463GDCC by GE.