Albany D 400L-1 - Range hood Qasair - Free user manual and instructions
Find the device manual for free Albany D 400L-1 Qasair in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Under-cabinet range hood |
| Brand | Qasair |
| Model | Albany D 400L-1 |
| Width | 90 cm |
| Depth | 50 cm |
| Height | Variable (min 65 cm, max 110 cm) |
| Weight | Approximately 18 kg |
| Power Supply | 220-240 V ~ 50 Hz |
| Motor Power | 250 W |
| Lighting | 2 x 20 W halogen lamps |
| Number of Fan Speeds | 3 speeds |
| Maximum Airflow | 650 m³/h |
| Noise Level (max speed) | 62 dB(A) |
| Grease Filter Type | Aluminum mesh, washable |
| Duct Diameter | 150 mm |
| Installation Type | Ducted (external venting required) |
| Control Type | Push buttons |
| Energy Class | B |
| Annual Energy Consumption | 65 kWh/year |
| Fluid Dynamic Efficiency Class | E |
| Grease Filtering Efficiency Class | C |
| Lighting Efficiency Class | G |
Frequently Asked Questions - Albany D 400L-1 Qasair
How do I install the Qasair Albany D 400L-1 range hood?
Installation should be performed by a qualified technician. Ensure the hood is mounted at least 65 cm above the cooking surface and securely fixed to the wall or cabinet. The ducting must be connected to an external vent using 150 mm ductwork. Refer to the installation manual for detailed steps.
How often should I clean the grease filters?
Clean the aluminum mesh filters every month or more frequently depending on usage. They can be washed in warm soapy water or in a dishwasher (low temperature cycle). Allow them to dry completely before reinstalling.
What type of light bulbs does the hood use and how do I replace them?
The hood uses 20 W halogen bulbs (GU10 base). To replace, unplug the hood, remove the bulb cover by twisting or unscrewing it, replace the bulb, and secure the cover. Do not touch the new bulb with bare fingers.
Why is my range hood not extracting properly?
First, check the grease filters for clogging. Also ensure the ductwork is not blocked or kinked. The hood may require a higher fan speed. If problems persist, contact a professional for motor inspection.
Can the Qasair Albany D 400L-1 be used in recirculation mode?
This model is designed for ducted (external venting) installation only. It does not support recirculation with charcoal filters. Ensure proper ducting to the outside.
What is the warranty period for this range hood?
Qasair typically offers a 2-year warranty on parts and labor. Register your product online or keep the purchase receipt for warranty claims.
How do I adjust the fan speed?
Use the push buttons on the control panel. Press the low, medium, or high button to select the desired speed. The hood will operate at that speed until changed or turned off.
Is it safe to use the hood without filters?
No, never operate the hood without the grease filters in place. They protect the motor and prevent grease buildup. Operating without filters may damage the unit and void the warranty.
What should I do if the hood is very noisy?
Check if the ductwork is properly connected and not vibrating against walls. Ensure the filters are secure. If noise persists, the motor bearings may need replacement – contact a service center.
Can I replace the halogen bulbs with LED bulbs?
It is recommended to use the specified halogen bulbs to avoid overheating or electrical issues. If you wish to use LEDs, consult a qualified electrician to ensure compatibility with the lighting circuit.
User questions about Albany D 400L-1 Qasair
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Albany D 400L-1 - Qasair and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Albany D 400L-1 by Qasair.