Eaton ETN 1200L-2 - Range hood Qasair - Free user manual and instructions
Find the device manual for free Eaton ETN 1200L-2 Qasair in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Range Hood |
| Brand | Qasair |
| Model | Eaton ETN 1200L-2 |
| Width | 1200 mm |
| Depth | 600 mm |
| Height (Adjustable) | 700 - 1100 mm |
| Weight | 35 kg |
| Color | Stainless Steel |
| Voltage | 240 V / 50 Hz |
| Power Consumption | 350 W |
| Motor Power | 2 x 150 W |
| Maximum Extraction Rate | 1200 m³/h |
| Noise Level (Max) | 65 dB |
| Lighting | 2 x 20 W LED |
| Control Type | Electronic Touch Buttons |
| Number of Speeds | 4 |
| Filter Type | Grease Filters (Aluminum) |
| Ducting Diameter | 150 mm |
| Installation Type | Wall Mounted / Ducted |
| Energy Class | A |
| No. of Motors | 2 |
| Remote Control | Optional |
Frequently Asked Questions - Eaton ETN 1200L-2 Qasair
How do I install the Qasair Eaton ETN 1200L-2 range hood?
Installation should be performed by a qualified professional. Ensure the hood is mounted at the recommended height above the cooktop, typically 650-750 mm for electric and 750-850 mm for gas. Use the provided mounting brackets and secure the ducting to the external vent. Refer to the installation manual for detailed steps.
How often should I clean the filters?
Grease filters should be cleaned every 2-3 months depending on usage. Wash them in a dishwasher or soak in hot water with degreasing detergent. Ensure they are completely dry before reinserting. Clogged filters reduce extraction efficiency.
Can I use the hood without ducting?
The Eaton ETN 1200L-2 is designed for ducted installation only. Recirculation is not possible as it does not include a carbon filter option. Ducting to the outside is required for proper operation.
What is the noise level of this hood?
The noise level varies by speed: approximately 45 dB on low speed and up to 65 dB on the highest setting. The hood features quiet operation technology for minimal disturbance.
How do I reset the filter indicator?
After cleaning or replacing the filters, press and hold the filter reset button for 3 seconds until the indicator light turns off. Refer to the control panel instructions in the user manual.
What type of lighting does the hood use?
The hood is equipped with 2 x 20 W LED lights. These provide bright, energy-efficient illumination over the cooking area. To replace, contact qualified service as LED modules may require special handling.
Is the hood compatible with a remote control?
Yes, an optional remote control (RC-12) can be purchased separately. It allows you to adjust speed, lights, and timer functions from a distance. Pairing instructions are in the accessory guide.
What are the dimensions of the hood?
The overall width is 1200 mm, depth 600 mm, and adjustable height from 700 to 1100 mm. The duct outlet diameter is 150 mm. Ensure adequate cabinet space for installation.
How do I clean the stainless steel surface?
Use a soft cloth with warm water and mild detergent. Avoid abrasive cleaners or scrubbing pads that could scratch the finish. For stubborn stains, use a stainless steel cleaner and wipe in the direction of the grain.
What should I do if the hood stops working?
First, check the circuit breaker and power supply. Then inspect the control board fuses. If the motor runs but no suction, ensure filters are clean and ducting is clear. If problems persist, contact Qasair customer service for repair.
User questions about Eaton ETN 1200L-2 Qasair
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Range hood in PDF format for free! Find your manual Eaton ETN 1200L-2 - Qasair and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Eaton ETN 1200L-2 by Qasair.