SGS System - Pregnant SONANCE - Free user manual and instructions
Find the device manual for free SGS System SONANCE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | In-Wall Speaker System |
| Model | SGS System by Sonance |
| Dimensions (each speaker) | 7.5 x 4.5 x 3.5 inches (190 x 114 x 89 mm) |
| Weight (each speaker) | 2.2 lbs (1 kg) |
| Power Handling | 50 Watts RMS / 100 Watts peak |
| Frequency Response | 60 Hz - 20 kHz |
| Impedance | 8 Ohms |
| Sensitivity | 88 dB SPL @ 1W/1m |
| Woofer Size | 5.25 inches (133 mm) polypropylene cone |
| Tweeter Size | 1 inch (25 mm) silk dome |
| Input Type | Spring-loaded terminals (accepts bare wire up to 14 AWG) |
| Mounting | Flush in-wall with included cutout template |
| Grille Material | Perforated steel, paintable to match decor |
| Baffle Material | High-impact ABS plastic |
| Color | White (paintable) |
| Warranty | 5 years limited |
| Recommended Amplifier Power | 10 - 100 Watts per channel |
| Outdoor Rating | Not rated for outdoor use (indoor only) |
| Included Accessories | Cutout template, mounting screws, paint mask |
| Certifications | CE, RoHS |
Frequently Asked Questions - SGS System SONANCE
What is the Sonance SGS System?
The Sonance SGS System is an in-wall speaker system designed for high-quality audio reproduction in residential or commercial settings. It features a 5.25-inch woofer and a 1-inch tweeter.
How do I install the SGS System speakers?
Use the included cutout template to mark the wall, cut a hole, run speaker wire, connect to the spring-loaded terminals, and secure the speaker with the provided screws. Paint the grille for a seamless look.
What is the power handling of the SGS System?
Each speaker handles 50 Watts RMS and 100 Watts peak. It is recommended to use an amplifier with 10-100 Watts per channel.
Can I use the SGS System outdoors?
No, this speaker is designed for indoor use only. Exposure to moisture or extreme temperatures may damage it.
What size wire should I use?
Use 16 to 14 AWG speaker wire. Strip about 1/2 inch of insulation and insert into the spring-loaded terminals.
Can the grille be painted?
Yes, the steel grille is paintable. Use spray paint designed for metal; remove the grille and apply thin coats. The included paint mask protects the speaker.
How do I clean the speakers?
Wipe the grille and baffle with a dry, soft cloth. Do not use water or cleaning agents as they may damage the components.
What is the warranty for the SGS System?
Sonance offers a 5-year limited warranty covering defects in materials and workmanship. Register your product for full coverage.
Are spare parts available?
Yes, Sonance provides replacement drivers, grilles, and mounting hardware. Contact Sonance customer support for ordering.
Do I need a subwoofer with the SGS System?
The SGS System has a frequency response down to 60 Hz, which provides good bass. However, for deeper bass (<40 Hz), consider adding a dedicated subwoofer.
User questions about SGS System SONANCE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pregnant in PDF format for free! Find your manual SGS System - SONANCE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. SGS System by SONANCE.