EFC-02-1A - Access Control System EverFocus - Free user manual and instructions
Find the device manual for free EFC-02-1A EverFocus in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Access Control System |
| Brand | EverFocus |
| Model | EFC-02-1A |
| Dimensions (approx.) | 120 x 80 x 25 mm |
| Weight (approx.) | 200 g |
| Power Supply | 12V DC, 500mA |
| Supported Card Types | 125kHz EM, 13.56MHz MIFARE |
| User Capacity | Up to 2,000 users |
| Event Log | Up to 100,000 events |
| Communication Interface | RS-485, Wiegand |
| Relay Output | 1 x Form C (5A @ 30V DC) |
| Tamper Switch | Yes |
| Operating Temperature | -10°C to 50°C |
| Humidity | 0% - 95% (non-condensing) |
| Mounting | Wall mount (included) |
| Main Functions | Door lock control, card/tag authentication, time schedules, anti-passback |
| Security Features | Tamper detection, encrypted Wiegand communication |
| Maintenance | Keep dry; clean with soft cloth; avoid solvents |
| Spare Parts & Repairability | Contact EverFocus support for replacement units or service |
| General Information | Designed for indoor use. Compliance: CE, FCC |
Frequently Asked Questions - EFC-02-1A EverFocus
What is the default password for the EFC-02-1A?
The default password is usually 1234 or 0000. Refer to the manual for master code reset procedure.
How do I add a new user card?
Enter programming mode using the master code, then present the new card to the reader. The system will beep to confirm enrollment. Detailed steps are in the user manual.
Can I connect the EFC-02-1A to a computer?
Yes, via the RS-485 interface using a USB-to-RS485 converter. Management software is required for configuration and event monitoring.
What types of cards are supported?
It supports 125kHz EM (like HID Prox) and 13.56MHz MIFARE cards. Both card types can be used simultaneously.
How do I reset the system to factory defaults?
Press and hold the reset button (usually inside the unit) for 10 seconds. All user data and settings will be erased. Alternatively, use the master code reset sequence.
What is the maximum number of users I can store?
The system can store up to 2,000 users and 100,000 event logs. For larger installations, consider networking multiple units.
Does the EFC-02-1A support Wiegand output?
Yes, it has a Wiegand output (26-bit or 34-bit) for connecting to third-party controllers or readers.
How do I change the door open time?
Enter programming mode, navigate to relay settings, and adjust the door unlock duration (typically 1-99 seconds). Save and exit.
What is the operating temperature range?
The device operates from -10°C to 50°C (14°F to 122°F). Avoid direct sunlight or extreme conditions.
Where can I find the full user manual?
The complete manual is available as a free PDF download on the EverFocus website or through notice-facile.com. It covers all installation, programming, and troubleshooting steps.
User questions about EFC-02-1A EverFocus
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Control System in PDF format for free! Find your manual EFC-02-1A - EverFocus and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EFC-02-1A by EverFocus.