CMA - Faucet CATA - Free user manual and instructions

Product Type	Single-lever kitchen faucet
Brand	CATA
Model	CMA
Material	Brass body with chrome finish
Height	Approx. 380 mm
Spout Reach	Approx. 220 mm
Weight	Approx. 1.2 kg
Mounting Type	Deck-mounted, single hole
Water Supply	Cold and hot (3/8" flexible hoses)
Handle Type	Lever handle
Flow Rate	Up to 5.7 L/min (at 3 bar)
Function	Single lever for flow and temperature control
Aerator	M24x1 female, included
Cleaning	Wipe with damp cloth, avoid abrasive cleaners
Maintenance	Periodically check connections, replace cartridge if dripping
Spare Parts	Cartridge, aerator, flexible hoses available
Warranty	2 years from date of purchase

Frequently Asked Questions - CMA CATA

How do I install the CATA CMA faucet?

Installation is straightforward: 1) Insert flexible hoses through the mounting hole. 2) Place the faucet base and tighten the locking nut from below. 3) Connect hoses to water supply (hot left, cold right). 4) Attach aerator. Refer to the manual for detailed steps.

What is the recommended water pressure for this faucet?

The faucet works best with a water pressure between 1 and 5 bars. If pressure exceeds 5 bars, install a pressure reducer.

How do I replace the cartridge if the faucet drips?

First, turn off water supply. Then, remove the lever handle (usually a hidden screw under a cap). Unscrew the cartridge retaining nut and pull out the old cartridge. Install the new one (ensure alignment) and reassemble. Test for leaks.

Can I use the faucet with a tankless water heater?

Yes, the CATA CMA is compatible with tankless water heaters. Ensure the flow rate is sufficient to activate the heater (minimum 2 L/min).

How do I clean the faucet without damaging the finish?

Use a soft damp cloth and mild soap. Rinse with water and dry with a soft towel. Avoid abrasive sponges or harsh chemicals like bleach, which can damage the chrome finish.

The aerator is clogged, what should I do?

Unscrew the aerator counterclockwise. Soak it in vinegar overnight to dissolve mineral deposits. Rinse thoroughly and reattach. If still clogged, replace with a new aerator (standard M24x1 female).

What are the dimensions of the faucet?

The total height is approximately 380 mm, with a spout reach of 220 mm. The base diameter is about 50 mm. These measurements are approximate and may vary slightly.

Does the faucet come with installation hardware?

Yes, the package includes the faucet body, flexible hoses, mounting nut, washers, and an aerator. You may need additional tools like a basin wrench for installation.

How do I adjust the hot water temperature limit?

Some models have a temperature limiter. Remove the lever handle, locate the adjustment ring (usually a plastic piece), and rotate it to the desired maximum temperature. Reassemble the handle.

Where can I find spare parts for the CMA faucet?

Spare parts like cartridges, aerators, and hoses are available from CATA authorized dealers or online shops. Use the model number CMA to search for compatible parts.

USER MANUAL CMA CATA

Modern kitchen faucet with curved handle and side faucet (no text or symbols visible)

CMA

Cod. 02503400 EAN 8422248107877