CBA - Faucet CATA - Free user manual and instructions
Find the device manual for free CBA CATA in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Kitchen Faucet |
| Model | CBA |
| Brand | CATA |
| Material | Brass |
| Finish | Chrome |
| Overall Height | 15.7 inches (400 mm) |
| Spout Reach | 8.3 inches (210 mm) |
| Flow Rate | 1.8 GPM (6.8 L/min) |
| Number of Handles | 1 (Single Lever) |
| Installation Type | Deck-mounted |
| Valve Type | Ceramic Disc |
| Weight | 3.3 lbs (1.5 kg) |
| Connection Size | 3/8 inch compression |
| Warranty | 5 years limited |
| Certifications | NSF 61, cUPC |
Frequently Asked Questions - CBA CATA
How do I install the CATA CBA faucet?
Installation typically requires a 1-3/8 inch hole in the sink or countertop. Follow the included instructions: attach the hoses, secure the faucet with mounting hardware, and connect to water supply. For detailed steps, refer to the manual.
How should I clean the faucet?
Clean with a soft damp cloth and mild soap. Avoid abrasive cleaners or harsh chemicals that can damage the chrome finish. Rinse thoroughly and dry to prevent water spots.
What should I do if the faucet is leaking?
Leaks are often due to a worn cartridge or loose connections. First, check that all supply line connections are tight. If the leak persists, you may need to replace the ceramic disc cartridge. Contact CATA customer service for replacement parts.
Is this faucet compatible with all sink types?
This deck-mounted faucet fits standard 1-3/8 inch sink holes. It is compatible with most kitchen sinks, including stainless steel, granite, and composite. For thicker countertops (over 2 inches), adapter hardware may be required.
How do I replace the cartridge?
Shut off water supply. Remove the handle by unscrewing the set screw (often under a cap). Lift the handle, unscrew the retaining nut, and pull out the old cartridge. Install the new cartridge with the alignment tabs matching the notches, then reassemble. Ensure the cartridge is the correct model (CBA).
Why is my water pressure low?
Low pressure can result from clogged aerator or partially closed angle stops. Unscrew the aerator and clean it with vinegar if mineral deposits are present. Also verify that the supply valves are fully open. If using with a water filter, check the filter cartridge.
Can I install this faucet on a granite countertop?
Yes, but installation on granite or natural stone requires careful drilling with a diamond hole saw. We recommend hiring a professional to avoid cracking. The faucet base must sit flat; use a silicone sealant to prevent water penetration.
Is the faucet lead-free?
Yes, the CATA CBA faucet is made from lead-free brass and complies with NSF 61 and California AB-1953 regulations, ensuring it is safe for drinking water.
How do I adjust the temperature setting?
The temperature is controlled by a single lever. Move the lever left for hot, right for cold. To limit maximum hot water temperature, some models have a temperature limit stop on the cartridge that can be rotated with a screwdriver.
What tools do I need for installation?
You will need an adjustable wrench, pliers, basin wrench (for tight spaces), screwdriver (Phillips and flathead), plumber's tape (Teflon), and possibly a drill with a 1-3/8 inch hole saw if no hole exists.
User questions about CBA CATA
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Faucet in PDF format for free! Find your manual CBA - CATA and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. CBA by CATA.