C-HDM-145 - Accessory Havis - Free user manual and instructions

Product Type	Vehicle Mount Accessory
Compatibility	Laptops and Tablets up to 15 inches
Mounting Type	In-vehicle base plate or track system
Material	Aluminum and high-impact plastic
Dimensions (H x W x D)	2.5 x 10 x 8 inches
Weight	1.5 lbs
Weight Capacity	10 lbs
Rotation	360 degrees, tilt and swivel
Locking Mechanism	Key lock or screw-down
Power	Passive (no power required)
Installation	Hardware included for standard mounting
Vibration Dampening	Built-in shock absorption
Material Finish	Black powder coat
Operating Temperature	-20°F to 140°F
Certifications	SAE J1455 compliant
Warranty	3 years limited warranty
Spare Parts	Available through Havis authorized dealers
Repairability	Modular design for easy part replacement
Cleaning	Wipe with damp cloth, mild detergent
Safety	Meets vehicle safety standards

Frequently Asked Questions - C-HDM-145 Havis

What devices is the Havis C-HDM-145 compatible with?

The C-HDM-145 is designed to hold laptops and tablets up to 15 inches. It is compatible with most standard docking stations and devices that fit within its adjustable cradle.

How do I install the C-HDM-145 in my vehicle?

Installation involves attaching the mount to a vehicle base plate or track system using the included hardware. Ensure the mounting surface is clean and secure. Follow the manual for torque specifications.

Can the mount be adjusted for optimal viewing angle?

Yes, the C-HDM-145 offers 360-degree rotation, tilt, and swivel adjustments, allowing you to position your device for comfortable viewing and operation.

Does the mount require power?

No, the C-HDM-145 is a passive mount and does not require any electrical connection. It relies on mechanical locking to secure your device.

What is the maximum weight capacity?

The mount can support devices up to 10 lbs. Overloading may reduce stability and safety.

Is the C-HDM-145 durable for rough road conditions?

Yes, it features built-in vibration dampening and meets SAE J1455 standards for rugged vehicle use, ensuring your device remains secure even on bumpy terrain.

How do I clean and maintain the mount?

Clean with a damp cloth and mild detergent. Avoid abrasive cleaners. Periodically check all bolts and screws for tightness. Lubricate moving parts as needed.

What is the warranty period?

Havis offers a 3-year limited warranty against defects in materials and workmanship. Contact Havis customer service for claims.

Can I replace parts if they wear out?

Yes, the mount has a modular design. Commonly replaced parts include knobs, pads, and hardware. They are available through Havis authorized dealers.

Is the mount lockable to prevent theft?

Some versions include a key lock; otherwise, a screw-down mechanism secures the device. Additional security accessories are available separately.

USER MANUAL C-HDM-145 Havis

Havis Heavy Duty Passenger Side Mounts

General Installation Instructions

Required tools to complete installation.

• Large Metric Socket Set (1/2" drive)
• Small Metric and US Standard Socket Set (1/4" drive)
• 7/8" Wrench
• 1/2" Wrench
• 7/16" Wrench
  • US Standard Allen Wrench Set
  • Phillips head Screwdriver

Complete assembly in vehicle (2010 Ford Focus)

Required parts to complete assembly Optional parts for assembly

For installation of Havis products, ALWAYS...

• Read all instructions before installing any Havis, Inc. Products.
• Check for obstructions (wire, brake lines, fuel tank, etc.)
• Use hardware provided with install kit

Havis Heavy Duty Passenger Side Mounts General Installation Instructions

2010 Ford Focus used for instructions

A) Remove the plastic caps that cover the seat bolts. Remove the OEM seat bolts, seat nuts and seat studs, making sure to keep the seat bolts for HDM Base installation (Step 3).
B) Remove all rubber thread protectors from the mounting holes on the HDM Base.

Align the HDM Base mounting holes to seat bolt locations and loosely attach the seat bolts. Use caution to avoid stripping the threads. Fully tighten the bolts once HDM Base is properly in place.

NOTE: Some HDM Bases mount under the vehicle seat bracket and reuse OEM seat bolts (A), while other HDM Bases mount over the top of vehicle seat bracket and use provided spacers and bolts (B).

Attach the assembled Offset Bracket and Pole to the HDM Base inside the vehicle, using supplied 5/16" x 3/4" hex bolts, lock washers, and flat washers. Make sure to adjust Offset Bracket to desired position before all hardware is fully tightened.

NOTE: If your application needs to be closer to center of vehicle, see optional C-HMD-409 Offset Plate.

Lift the seat to place the HDM Base between the seat brackets and the floor.

NOTE: Loosening rear seat bolts may be required for ease of installation.

On the workbench, assemble the Offset Bracket and Pole using supplied 5/16" x 1" hex bolts, lock washers, and nuts (x4). Make sure all hardware is fully tightened. Attach the shaft collar anywhere on the inner pole, making sure to leave the shaft collar loose in order to adjust Pole height once installed in vehicle (Step 12).

A) Align the Adaptor Plate mounting studs to the top of the inner pole, then attach using the supplied 5/16" lock washers, flat washers, and nuts. Place the large plastic washer on top of Adaptor Plate.

B) Align Swing Arm with Motion Device mounting holes to the top of the inner pole, then attach using 1/4" lock washers, flat washers, and bolts.

NOTE: Make sure all hardware is fully tightened.

Havis Heavy Duty Passenger Side Mounts General Installation Instructions

2010 Ford Focus used for instructions

7

A) Install the Top Offset with the supplied hardware and handle. Tighten the hardware to allow minimal motion. Place the large plastic washer on the Top Offset.

B) No adjustment required, please proceed to Step 8.

9

A) Connect the Motion Device assembly to the Top Offset. Tighten the hardware to allow minimal motion. NOTE: Motion Device has two (2) sets of holes.
3-bolt pattern allows for 90 rotation.
2-bolt pattern allows for 180 rotation.
B) Motion Device is already connected, please proceed to step 10.

11

Attach the Docking Station to the mounting bracket.

8

Remove mounting bracket (a) from the bottom of the Docking Station and attach to the Motion Device (b). NOTE: If attaching a Universal Laptop Mount (UT-X Series or C-3090 Series), mount directly to the Motion Device.

10

Attach the Power Supply to the designated mounting location on the Docking Station.

12

Adjust the shaft collar to desired height and fully tighten.

Havis Heavy Duty Passenger Side Mounts General Installation Instructions

2010 Ford Focus used for instructions

To attach the optional two-piece support collar to the Pole, attach the side support arm to the two-piece support collar. Attach the side support arm to the underside of the dash with the supplied L bracket. Make sure all hardware is fully tightened.

Congratulations, the installation is complete. To properly dock your computer into the Havis Docking Station, you must first open the docking connector door on the bottom of your computer or damages may occur.

a) With the computer seated, turn the docking latch to the DOCK position. b) Secure by locking the barrel lock with the supplied key.

If you are installing the optional ChargeGuard® Power Management System, run power wires to the ChargeGuard and connect to the fused, 12 volt battery. (Additional instructions inside the ChargeGuard box.)

a) Load the front of the computer into the front hooks of the Docking Station. b) Gently lower the back of the laptop down into the docking connector.

You have successfully and safely docked your computer. Please visit www.Havis.com for more mounting and computing accessories.