ADR62X1 - Dash cam PHILIPS - Free user manual and instructions

Product Type	Dash Cam
Brand	Philips
Model	ADR62X1
Dimensions	Approx. 70 x 50 x 30 mm
Weight	Approx. 80 g
Power Supply	12V car adapter (included); built-in lithium battery
Video Resolution	Full HD 1080p at 30fps
Lens Aperture	F2.0
Viewing Angle	140° wide angle
Recording Modes	Continuous loop recording, emergency recording
G-Sensor	Built-in 3-axis G-sensor for impact detection
Parking Mode	Supports parking surveillance (requires hardwire kit)
Night Vision	Low-light enhancement with WDR
Storage	MicroSD card (up to 128GB, Class 10 or higher)
Display	2.0-inch LCD screen
Audio Recording	Built-in microphone and speaker
GPS	No built-in GPS
Maintenance & Cleaning	Clean lens with a soft, dry microfiber cloth. Do not use solvents.
Safety Instructions	Use only the supplied car charger. Do not expose to extreme temperatures.
Spare Parts & Repairability	Spare parts not sold separately. Contact Philips support for repairs.
General Information	Designed for reliable on-road video recording. Easy mount with suction cup.

Frequently Asked Questions - ADR62X1 PHILIPS

How do I install the Philips ADR62X1 dash cam?

Mount the camera on the windshield using the included suction cup. Connect the power cable to the 12V car adapter and plug into the cigarette lighter socket. Route the cable along the windshield edge for a clean look.

What memory card is recommended?

Use a MicroSD card with Class 10 or UHS-I rating, capacity up to 128GB. Format the card in the camera before first use.

Does the ADR62X1 have built-in GPS?

No, this model does not include built-in GPS. Speed and location data are not recorded.

How does loop recording work?

The camera automatically overwrites the oldest footage when the memory card is full. Important clips can be locked to prevent deletion.

Can I use the camera while parked?

Yes, parking mode is supported but requires a hardwire kit (sold separately) to monitor the battery. The camera will record when motion or impact is detected.

How to view recorded videos?

You can view videos directly on the camera's 2-inch screen or by removing the MicroSD card and inserting it into a computer. Use a card reader for best results.

What is the resolution and frame rate?

The camera records at 1920x1080 (Full HD) resolution at 30 frames per second.

Does it have night vision?

Yes, the camera has WDR (Wide Dynamic Range) to improve low-light performance. It is not true infrared night vision but enhances visibility at night.

How to clean the camera lens?

Use a soft, dry microfiber cloth to gently wipe the lens. Avoid using any liquids or abrasive materials.

What to do if the camera freezes or stops working?

Try resetting the camera by pressing the reset button (use a paperclip). If the issue persists, format the memory card or contact Philips support.

USER MANUAL ADR62X1 PHILIPS

FAQs

General

P.1

Operation issues P.2

Product features P.3-4

Micro SD card issues P5

App connection and usage issues P.6-7

General

Question What is FHD? And when it comes to resolution, is it the case of the higher the better?

Answer 1080p (1920×1080 pixels; also known as Full HD or FHD) is a set of HDTV high-definition video modes characterized by 1080 horizontal lines of vertical resolution.

No, image quality is not just a case of the higher the resolution the better. For the purpose of protecting yourself from “crash-for-cash” or “bump-and-run” accidents, a recorder with 1080p is the optimum resolution for clarity fine enough for license plate recognition, low light performance, while balancing long recording time. A higher resolution will greatly reduce the life of the memory card, and shorten the amount of time it can record. For the same SD (TF) card, with 1440p, the recordable time will be reduced by 30%, and the increased repetitive read/write operation will reduces the memory card’s lifetime, hence more frequent replacement of the SD (TF) card.

In addition, due to the fact that less light is allocated to each pixel, a higher resolution camera (1296p/1440p) will be significantly less effective when used at night.

Your dash cam should be practical and durable for use inside a car. For technical specifications, it is not always the higher the better.

Question What is FOV? And is a wider viewing angle always better?

Answer

The larger the viewing angle, the larger the range of visual evidence that can be recorded. However, when the recording range is large, the resolution is also reduced. Also, with a higher FOV, cars usually appears further away, hence vehicle license plate become smaller and harder to detect. The optimum FOV should be the degree to cover the lanes left and right of your vehicle and no more, in order to maximize the image of what is relevant. With 1080p, it is around 140 degree FOV. However, this is a personal choice, as some might prefer to record as wide as possible for parking surveillance while danger can be from all angles.And unfortunately, some manufacturers make feature claims that exaggerate reality. In other words, what you’re sold is not what you get. For example, a dash cam is advertised as having a 140^ wide angle lens, when it is in fact only 100^ . The key is to only choose products from manufacturers with a reputable brand.

Question What is Automotive Grade Quality? And why is it good that a product is advertised as Automotive Grade Quality?

Answer

Unlike consumer and home products, automotive operates under tough condition. Hence, Dashcam must be able to be as tough as the automotive in order to survive extreme heat and cold during outdoor parking and high vibration frequency during operation.

Automotive Grade Quality means the product can function properly and reliably under harsh automotive environments (e.g. high temperatures and high vibrations). And most dashcam are consumer grade instead of automotive grade. When you buy an automotive grade quality product, you can be sure it will work under the similar tough condition as your vehicle, giving you that extra peace of mind.

Question Do you have spare parts available for replacement? For example, a power cable and mounting accessories.

Answer

There are no spare replacement parts for sale, like power cables or mounting accessories. It’s very rare that replacements are necessary, but in the case you need spare parts, please seek assistance from retailer where you purchased the product.

Operation issues

Question Why does my Dashcam not start working when the power cable is plugged in?

Answer For some cars, the cigarette lighter does not provide power until the engine is on. So please start your car engine first. For some dashcams (ADR810s, ADR900), you must also turn on the power button on the device.

If the Dashcam still fails to turn on, please check the power cable is functioning by connecting it to other devices. If all above efforts fail, please contact our technical support center.

Question Is the Dashcam working when the screen is off?

Answer For safety reasons, the LCD screen will turn off after 3 minutes of recording. However, this doesn't mean that Dashcam stops working. The device will continue to record after the screen has switched off. As long as the LED indicator is on, or is blinking, you know your device is working. You can adjust the LCD screen ON/OFF function in the settings.

Question When the emergency recording is on, can I use other features at the same time?

Answer No. When the emergency mode has been triggered, your Dashcam will focus on recording all information that it can, so other functions will be deactivated. For safety reasons, you can NOT operate the Dashcam at this time.

Question Does the Dashcam power on and off automatically?

Answer Yes. When you switch the car engine on, the Dashcam will start recording automatically. Likewise, when the engine is turned off, the Dashcam will also switch off. Or, if you have an Dashcam with WaveGuard functionality, it will enter parking surveillance mode.

Question Why would the Dashcam continue to work after the car is turned off?

Answer When the engine is off, the cigarette lighter can still draw power in some car models. So your Dashcam could still use electricity from the car battery. To avoid this, please unplug the power cable from the socket to avoid draining the car battery when you're not in your car.

Question When I start the ignition, why does the Dashcam turn off and then on again?

Answer When we turn on the ignition, the car's battery needs all available power to start the engine. So at that moment, all other devices will be turned off temporarily, including the Dashcam. Once the ignition system has finished its job, the car battery begins to power other devices, so the Dashcam will turn on again.

Question When the Dashcam is connected to a computer, can it still record?

Answer When connected to computer, the Dashcam will switch to data transfer mode. So it cannot record at the same time.

Product features

Question Is FOV 170 better than 120?

Answer A wider angle lens means more of the field of view can be recorded, but it also means that the video resolution will be reduced a little. The final choice depends on your needs as a consumer. For example, you may prefer a wider angle lens if you're using your Dashcam for parking surveillance, as it will capture more of what happens around your car.

Question Why does the Dashcam need good night time capabilities?

Answer You need your Dashcam to protect you when you're driving during the day and the night. And with the risk of an accident increasing in low-light conditions, it's vital that your Dashcam has good night time recording capabilities. For parking monitoring features, quality night time recording is also important, as there may be little illumination of the area around your car.

Question What is optimal in terms of night view? ISO3200, or ISO6400?

Answer Quality of night vision is influenced by three elements: lens aperture, the capacity of the processor and the light sensitivity of the sensor. For ISO ratings, it is a case of the higher the number, the better the night viewing capabilities.

There are also many Dashcam in market claiming starlight visibility. As this is a very casual, generic term without professional definition like ISO rating, please check their night time quality carefully as many are not as good as claimed.

Question What is the "Fatigue Index"? How does it work?

Answer To help drivers manage their changing levels of fatigue, the device displays a fatigue index. This takes into account physiological and journey related parameters (such as the time of day and the time spent driving), and informs the driver if they might be getting too tired to drive. The device will also sound a fatigue alert every two hours of driving.

When the fatigue index is less than 60, the value is displayed in a green color. Before the fatigue index reaches 80, the value is in yellow and accompanied by an alert beep. When the fatigue index goes above 80, the value changes to red and the audible alert sounds three times.

To use this feature, ensure it is turned on in the settings and that the system time is correctly set. When this feature is switched off, the fatigue index will not be displayed on screen.

Product features

Question What is WaveGuard? How is it different from parking monitoring features in other Dashcams?

Answer Many Dashcam claims motion (G-sensor) activated parking monitoring, meaning the recording only starts after motion detected. Most of the time, this is too late as that means the accident already happened. And many lower end Dashcam needs up to 5 seconds to start recording after motion detected. Hence, it is unlikely those Dashcam can record useful information during parking monitoring.

WaveGuard uses unique Philips microwave detection technology. This senses the scene in front of the car and starts recording when it detects a moving object, such as a human or other vehicle, approaching too closely to your vehicle. If the object then moves past the vehicle and no further motion is detected, the device will stop recording and automatically shut down to save vehicle battery power. Hence, it will recording before, during and after the accident, if that happened.

With parking monitoring that relies on video motion detection, when compared to WaveGuard, they are less effective at identifying movement, especially in low-light conditions (and it's at night that you most need your motion detection technology to be working well). Due to their inability to identify distance, those parking monitoring will be constant recording irrelevant information from far away, and draining battery far quicker than needed. Note: WaveGuard, and also video motion detection parking monitoring, requires a continuous power supply, so the device needs to be plugged in to your vehicle.

Question Will the use of a UV protection screen affect the performance of WaveGuard?

Answer No, as long as the UV protection screen is not composed of any metal materials.

Question How long does the battery of the ADR620 normal last when recording?

Answer When you turn off the engine, the device's in-built battery will be able to support recording for up to 30 minutes.

Question How long will it take to charge the battery in the ADR620?

Answer A full charge is complete in about 3 hours.

Micro SD card issues

Question Which Micro SD card should be used for the Dashcam?

Answer You should choose the highest quality SD card available, as it will be better able to endure strong vibrations and high temperatures. Transfer speed must be of class 10 or above.

Question What is the recording time for the different sized memory cards?

Answer

Micro SD Card Capacity	Video Resolution
	720P/30FPS	720P/60PFS	1080P/30FPS
16GB	260 minutes	170 minutes	160 minutes
32GB	520 minutes	340 minutes	320 minutes
64GB	1040 minutes	680 minutes	640 minutes

Question The micro SD memory card I'm using often experiences writing/reading errors, why is that?

Answer It's likely due to the quality of memory card you're using, as opposed to an issue with your Dashcam. Please replace the SD card with a more reliable and durable product. Otherwise, you might lose critical video evidence due to a corrupt memory file.

Question The Dashcam suggested I format the SD memory card every 2 to 3 months, why is that?

Answer By periodically formatting your SD card you ensure it works at its best, guaranteeing a reliable video recording.

Question How often should I back up my recordings stored on the SD card?

Answer We recommend you regularly back up your recordings. While you may not have been involved in an accident, it's possible your camera witnessed an event that you didn't notice. So being able to look back at archived recordings could be very valuable.

App connection and usage issues

Question Do all Philips Dashcam models have a Wi-Fi connection?

Answer Selected models, like ADR820, have Wi-Fi connection to your smartphone using the GoSure app.

Question Once the Philips Dashcam is connected to my phone with Wi-Fi, will it automatically save the videos to the phone?

Answer No. There are many video clips already recorded in the SD card of the Dashcam so you have to select the relevant files and perform the download function to get them copied onto your smartphone's memory.

Question What is the GoSure app? Can I use other apps?

Answer The GoSure app allows you to live stream your Dashcam recordings, save important videos, and adjust the dashcam settings, all from your smartphone. And no, you can only connect your Philips Dashcam with the Philips GoSure app.

Question Are there any special requirements for a smartphone, in order to be able to use the GoSure app?

Answer There are no special system requirements, the GoSure app will work well on most smartphones using iOS and Android.

Question Can I connect to more than one Philips Dashcam?

Answer No, you can only connect to one Dashcam at a time.

Question Even though the GoSure app is installed, I cannot pair the Philips Dashcam with my smartphone via Wi-Fi.

Answer Please check that you have switched on the Wi-Fi for both the Dashcam and the smartphone, and that you've inputted the Wi-Fi password correctly. Then repeat the pairing procedure. Please note it is connected to the Wi-Fi of the Dashcam, not your home/office Wi-Fi.

Question When my phone is connected to the app, will it consume data?

Answer No, while phone and Dashcam are connected to each other via Wi-Fi, it will not consume any data.

Question Does my phone need to be on all the time when the app is on?

Answer Yes. You need to keep your phone turned on to keep the app running, in order to operate the app's features.

App connection and usage issues

Question Do I need to keep my phone on the whole time when the Dashcam is operating?

Answer No. The Dashcam is recording onto the SD memory card, so you don't need to connect it to the app all the time. Connection between your phone and the Dashcam is only needed when you want to use the app, such as live streaming the recording, or to transfer recorded videos over to your phone's memory.

Question How do I know if there is a firmware upgrade?

Answer Please check the official Philips page for the latest product updates.

Question How do I upgrade the firmware?

Answer When you download new firmware, please also download the corresponding instructions, which will clearly explain how to perform the upgrade.