RSV145 - Alarm Clock JOHNSON - Free user manual and instructions

Product Type	Alarm Clock Radio
Brand	Johnson
Model	RSV145
Dimensions (W x H x D)	150 x 80 x 100 mm
Weight	0.5 kg
Power Source	AC 230V 50Hz or 2 x AAA batteries (backup)
Radio Bands	FM / AM
Alarm	Dual alarm with radio or buzzer
Snooze Function	Yes, adjustable duration (5-30 minutes)
Sleep Timer	Yes, up to 90 minutes
Display	LED with adjustable brightness
Speaker	Built-in, 3W
Headphone Jack	3.5 mm
Cleaning Instructions	Wipe with a soft dry cloth; do not use liquids.
Safety Precautions	Keep away from water, do not disassemble, use only specified voltage.
Spare Parts Availability	Not available; device should be repaired by qualified personnel.
General Information	Read user manual before use. Store in a dry place.

Frequently Asked Questions - RSV145 JOHNSON

How do I set the alarm on my Johnson RSV145?

Press and hold the ALARM SET button until the time flashes. Use the HOUR and MINUTE buttons to adjust, then press ALARM SET again to confirm.

How can I switch between radio and buzzer alarm?

Repeatedly press the ALARM MODE button to toggle between radio alarm, buzzer alarm, or both. The icon on the display indicates the current mode.

Why is my radio not picking up any stations?

Ensure the antenna is fully extended. Try scanning for stations by pressing and holding the TUNE button. If the problem persists, try a different location or check for interference.

How do I set the time?

Press and hold the TIME SET button until the hour flashes. Use the HOUR and MINUTE buttons to adjust, then press TIME SET again to save.

What batteries does the RSV145 use for backup?

The backup requires 2 AAA batteries (not included). They maintain time and alarm settings in case of a power outage.

How do I adjust the display brightness?

Repeatedly press the DIMMER button to cycle through brightness levels: high, medium, low, and off.

Can I use headphones with this alarm clock?

Yes, there is a 3.5mm headphone jack on the side. Inserting headphones will mute the built-in speaker.

What is the snooze duration and how do I use it?

When the alarm sounds, press the SNOOZE button. The alarm will silence and sound again after 9 minutes (default). To change duration, refer to the manual.

How do I clean the RSV145?

Unplug the device and wipe the exterior with a soft, dry cloth. Do not use any liquids or cleaning agents to avoid damage.

Where can I find the user manual?

The manual is available for free download on notice-facile.com in PDF format. You can also request a translated version by email.

USER MANUAL RSV145 JOHNSON

Radio alarm clock AM-FM

INSTRUCTIONS FOR USE

RoHS conform

AVVERTENZE GENERALI

Carefully read the requirements in this manual and keep in a safe place. It contains important instructions on the safety, use and future of your appliance.

This appliance is only for domestic use and must only to be used for the purpose it was specifically designed.

Any other use is considered improper and dangerous.

The manufacturer cannot be held responsible for any damages caused by improper, incorrect and negligent use.

The installation must be carried out according to the manufacturer's instructions.

The manufacturer shall not be held responsible for any damages to people, animals or objects caused by incorrect installation.

The safety of the electrical equipment is only guaranteed if it is connected to an electrical installation equipped with a suitable earthing system in compliance with the current standards on electrical safety.

Do not leave parts of packaging (plastic bags, foam polystyrene, nails, etc) within reach of children or incapacitated people since they are potential sources of danger. Before connecting the appliance, check that the technical data on the rating label corresponds to those of the main electricity network.

In case of incompatibility between the outlet and the plug, contact a qualified electrician for the necessary adjustments.

Do not use adaptors, multiple plugs and extension leads.

However, if absolutely necessary only use materials that conform to the current safety standards and that are compatible with the appliance and the main electricity network.

On using the appliance for the first time, remove any labels or protective sheets.

If the appliance is equipped with air inlets, make sure they are never blocked not even partially.

The use of any electrical appliance involves the observance of some fundamental rules. In particular: Do not immerge the appliance in water and do not wet; do not use it near water, in the tub, washbasin or near other recipients with liquids. If the appliance should accidentally fall in water, DO NOT try to touch it but immediately disconnect the plug from the mains power.

Then bring it to an authorised service centre for the necessary controls.

During use, the appliance must be kept away from any inflammable objects or substances or explosives.

Do not touch the appliance with wet hands or feet.

Do not use the appliance with bare feet.

Do not pull on the power cord or on the appliance itself to disconnect the plug from the power outlet.

Do not leave the appliance exposed to atmospheric agents (sun, rain...).

Keep the appliance out of reach of children or incapacitated people and do not let them use it.

Disconnect the plug from the power outlet when the appliance is not being used and before carrying out any cleaning or maintenance.

The power cord must be completely unwound to prevent it from overheating.

The power cord must be kept away from heat sources and/or sharp edges.

If power cord is damaged, have it replaced by qualified personnel.

Switch off and contact a qualified technician if the appliance should breakdown and/or not function properly.

Any tampering or interventions executed by unqualified people will cancel the guarantee.

Use a soft and non-abrasive cloth to clean the appliance.

When the appliance is unserviceable and must be eliminated, remove its cords and dispose of it at man authorised disposal centre in order to protect the environment.

- Warranty does not cover any glass parts of the product.

ATTENTION:

The damages of the power supply cord, originate by the wear aren't covered by guarantee; the repair will be in charge to the owner.

ATTENTION:

Warranty does not cover any plastic parts of the product

ATTENTION:

If the need should arise to take or send the appliance to an authorised service centre, make sure to clean all its parts thoroughly.

For hygienic purposes, the service centre shall reject appliances that are not perfectly clean on the outside or inside without making any controls or repairs.

The symbol 📁 on the product or on its packaging indicates that this product may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment.

By ensuring this product is disposed of correctly, you will help prevent potential negative conse-

quences for the environment and human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed information about recycling of this product, please contact your local city office, your household waste disposal service or the shop where you purchased the product.

Warning

To prevent electric shock; do not use this plug with an extension cord receptacle or other outlet unless the blades can be fully inserted to prevent blades exposure.

To prevent fire or shock hazard; do not expose this appliance to rain or moisture.

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lighting flash with arrowhead symbol, with an equilateral triangle is intended to alert the user to the presence of un-insulated dangerous voltage within the products enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to

alert the user to the presence of important operating and maintenance (servicing) instruction in the literature accompanying the appliance.

QUICK REFERENCE

1. SOURCE/AL.OFF

- Use this button to select AM or FM band - Use this button to turn the ALARM off after Alarm activates.

TIME/MEM/M+

- Use this button to set the clock - Use this button to store radio stations in the memory - Use this button to select the stored radio stations in the memory

3. VOL- / AL2

- Use this button to decrease the volume - Use this button to set the alarm time in ALARM 2

4. VOL+/AL1

- Use this button to increase the volume - Use this button to set the alarm time in ALARM 1

5. TUN - / MIN

- Use this button to search the radio station in backward direction - Use this button to adjust the minute in CLOCK or ALARM time

TUN + / HR

- Use this button to search the

radio station in forward direction

- Use this button to adjust the hour in CLOCK or ALARM time

7. SNOOZE / SLEEP

• Use this button to temporarily suspend the ALARM for a short period
• Use this button to set the sleep time

8. PM INDICATOR

- This indicator shows that the time display is PM

9. AL1-B INDICATOR

- This indicator shows that the unit is in ALARM-1 buzzer mode

10. AL1-R INDICATOR

- This indicator shows that the unit is in ALARM-1 radio mode

11. AL2-B INDICATOR

- This indicator shows that the unit is in ALARM-2 buzzer mode

12. AL2-R INDICATOR

- This indicator shows that the unit is in ALARM-2 radio mode

13. LED DISPLAY

- Display for the Clock and the Radio frequency.

14. SPEAKER

- Sound output.

15.FM WIRE ANTENNA

- Extent this wire antenna to obtain better FM broadcasting

16. DC JACK

- Connect the unit to the AC/DC adaptor.

17. BATTERY COMPARTMENT

- Compartment for the back-up battery.

CONNECTING THE UNIT TO POWER

Plug one end of the AC adaptor into the DC power Input, and then plug the other end into AC wall outlet. Before switching on the unit, make sure that the voltage of your electricity supply is the same as that indicated on the rating plate.

BATTERY BACKUP

Insert two pieces UM-3 batteries into the battery compartment. Be sure to observe the proper polarity (the "+" and "-" signs) as indicated inside the battery compartment.

In case of power failure or inter- rupted AC power, the current time and alarm time settings, the sto- red radio stations are preserved in the memory of the unit by means of battery back-up function.

SETTING THE CLOCK

A. With the unit in CLOCK mode, press and hold the TIME/MEM/M+ button for about 1 second, the time will begin to flash on the LED gdisplay.

B. Press the TUN+/HR button to adjust the hour.
C. Press the TUN-/MIN button to adjust the minute.
D. When the correct time is selected, press the TIME/MEM/M+ button again to confirm.

SETTING THE ALARMS

A. With the unit in CLOCK mode, press the VOL+/AL1 or VOL-/AL2 button. The ALARM time will begin to flash on the LED display.
B. Press the TUN+/HR button to adjust the alarm hour.
C. Press the TUN-/MIN button to adjust the alarm minute.
D. When the correct time is selected, press the VOL+/AL1 or VOL-/AL2 button to confirm.
E. Press the VOL+/AL1 or VOL-/AL2 to select the ALARM sound mode - buzzer or currently set radio station.

The alarm buzzer or radio indicator will light up.

SNOOZE FUNCTION

A. Whenever the alarm (radio or buzzer) activates, it can be temporarily suspended for a short period of 9 minutes by pressing the SNOOZE button once.
B. The buzzer or radio will then automatically activate again after the 9 minutes SNOOZE period has ended.
C. This procedure can be repeated for up to approximately one hour.

TURN OFF THE ALARM

When the Alarm activate, press the SOURCE/AL.

OFF button to turn off the Alarm.

LISTENING TO THE AM/FM RADIO

A. Press the SOURCE/AL. OFF button to select AM or FM band.
B. Press the TUN+/HR or TUN-/MIN buttons step by step to tune to the desired radio stations.
C. Press and hold the TUN+/HR or TUN-/MIN buttons for approx. 1 second, it will start to search the next radio station in the direction of the search. The search operation simply finds stations with strong signals. Stations with weak reception can only be tuned in manually.

SAVING A RADIO STATION TO THE MEMORY

A. Tune the radio to the desired station.
B. Press and hold the TIME/MEM/M+ button for approx. 1 second, it will

store this radio station in the memory.

C. Up to 10 AM and 10 FM radio stations can be stored in the memory.

TO LISTEN TO A SAVED RADIO STATION

A. Press the SOURCE/AL.

OFF button to select AM or FM band.

B. Press the TIME/MEM/M+ button to select the stored radio station.

A. This function allows you to listen to the radio while you fall asleep.
B. Press the SNOOZE/SLEEP button, the display will show the default sleep time of 90 minutes and the SLEEP indicator will start to flash.
C. Press the SLEEP button again to adjust the desired sleep time.
D. Now you can enjoy listening to the radio for the pre-set period of sleep time.
E. After this pre-set time has elapsed, the unit will switch off automatically.

SPECIFICATIONS

Frequency Range: AM 535 - 1650 KHz FM 88 - 108 MHz

Power Supply: AC 230V \~ 50 Hz

Back-Up Battery: 2 pc. UM3

Specifications are subject to change without prior notice.

GARANZIA

The validity of the guarantee starts from the purchasing date certified by the seller's stamp and expires at the end of the indicated period, even when the device has not been used. The guarantee covers all substitutions or repairs due to material or manufacturing defects. The guarantee has no validity in case of device tampering or when the defect is due to incorrect or improper use of the same. Substitutions and repair covered by the guarantee are made free of any charge for goods delivered free our service company representative. Only the freight will be at buyer's expense. All replaced parts or devices will become our property.

2 ANNI YEARS

internet: www.johnson.it

e-mail: com @johnson.it

MOD. RSV145

DATA ACQUISTO

PURCHASE DATE

DATA RIPARAZIONE

REPARE DATE

TIMBRO CENTRO ASSISTENZA

AFTER SALES SERVICE

CENTER STAMP

MOD. RSV145

This certificate of guarantee has to be dulyfilled in to be valid