BAMP-611-R - Support & Base BRIGMTON - Free user manual and instructions

Product Type	Monitor Stand / Support Base
Brand	Brigmton
Model	BAMP-611-R
Compatible Monitor Sizes	13" to 32" (estimated)
VESA Compatibility	75x75mm and 100x100mm
Load Capacity	Up to 10 kg (22 lbs)
Adjustability	Tilt: -5° to +15°, Swivel: -90° to +90°, Height: 100mm (estimated)
Cable Management	Integrated cable clips
Materials	Aluminum alloy and reinforced plastic
Color	Black
Clamp Mount	Desk thickness: 10-50mm
Grommet Mount	Hole diameter: 10-60mm
Dimensions (W x D x H)	590 x 200 x 100 mm (approx.)
Net Weight	2.1 kg (4.6 lbs)
Installation	Easy tool-free assembly
Cleaning	Wipe with a soft dry cloth; avoid solvents
Safety	Ensure monitor is securely attached; do not exceed weight limit
Warranty	2 years (estimated)

Frequently Asked Questions - BAMP-611-R BRIGMTON

Will this stand fit my 27-inch monitor?

Yes, the BAMP-611-R supports monitors from 13 to 32 inches, provided the monitor weighs no more than 10 kg and has a VESA pattern of 75x75mm or 100x100mm.

Does it support VESA 75x75?

Yes, it is compatible with both VESA 75x75mm and 100x100mm patterns.

Can I use this stand with a curved monitor?

Yes, the stand works with curved monitors as long as they meet the weight and VESA requirements. The tilt adjustment helps achieve optimal viewing angle.

How do I install the stand on my desk?

The stand can be installed using either a clamp or a grommet mount. For clamp mount, ensure your desk edge thickness is between 10 and 50 mm. For grommet mount, the hole diameter should be 10-60 mm.

Can I adjust the height after installation?

Yes, the stand features a gas spring mechanism for height adjustment up to 100 mm. Use the included hex key to tighten or loosen as needed.

What is the maximum weight capacity?

The maximum load capacity is 10 kg (22 lbs). Exceeding this may cause instability or damage.

Does it have cable management?

Yes, the stand includes integrated cable clips along the arm to keep cables organized and tidy.

How do I clean the stand?

Use a soft, dry cloth to wipe the stand. Do not use abrasive cleaners or solvents. For stubborn dirt, slightly dampen the cloth with water.

What materials is the stand made of?

The stand is constructed from an aluminum alloy and reinforced plastic for durability and stability.

Does it come with a warranty?

Yes, Brigmton offers a standard 2-year warranty. Please check the included manual or contact support for details.

USER MANUAL BAMP-611-R BRIGMTON

Three black BRIGHTON-branded speakers with foam spools, shown from different angles (top, middle, bottom) against a white background.

BAMP-611-B-N-R

BLUETOOTH SPEAKER-RADIO FM-MICROSD

Instruction Manual

OPERATION

On/Off: Press and hold for 2-3 seconds the rear switch to turn on the unit. To turn off repeat operation until the unit turns off.

Mode: After turning off the unit, tap the on/off button to switch modes: Bluetooth/FM Radio/MicroSD Card

Control buttons +/-: To change tracks briefly press + or - to move to the next or previous track. To change the volume hold + to increase the volume and - to decrease it.

Button Play/Pause

By a short press you can pause and resume playback in music mode or radio. In the Bluetooth mode, you can answer calls and hang up.

By a long press, in radio mode, you can perform a search for FM stations.

Bluetooth lighting: When playing back via Bluetooth the Bluetooth indicator flashes white. During music playback will remain on white.

Lighting Micro USB Input: During the load will remain red. Once fully charged the battery will change to green.

Note: After turning on the unit (no micro SD card) will go directly to Bluetooth mode. IF you insert a micro SD card automatically switches to micro SD mode.

Note: The battery life depends on the sound power used. To fully charge the device takes approximately 4 hours.

TROUBLESHOOTING

If the unit turns off automatically

- Low battery

If you can not play music

- The device can not identify the files stored on the card. Make sure they are MP3 format and are in the root directory.

BLUETOOTH CONNECTION

To connect the unit to your phone, connect the Bluetooth feature on your phone. Do a search for devices and select the device. The unit will automatically connect to your phone (no password needed)

"Features can change without notice"

Imported: I.R.P., S.L.

DECLARATION OF CONFORMITY

I.R.P., SL declare under our responsibility that the equipment meets the requirements indicated in the following directives:

EMC DIRECTIVES

IEC60950-1:2005; Am 1:2009

EN50371

EN60065

ETSI EN301 489

ETSI EN300 328

ETSI EN301 489-1 V 1.9.2 (2011-09)

ETSI EN301 489-17 V2.2.1 (2021-09)

EN62479:2010

ETSI EN 300 328 V 1.7.1 (2066-10)

Description of apparatus:

BRIGMTON Model BAMP-611-B-N-R

Wireless Speaker

Importer: I.R.P., SL

Address: Avenida Santa Clara de Cuba 5, 41007, Sevilla.