EWS375AP - Access Point ENGENIUS - Free user manual and instructions
Find the device manual for free EWS375AP ENGENIUS in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Wireless Access Point |
| Brand | EnGenius |
| Model | EWS375AP |
| Wireless Standard | IEEE 802.11ac Wave 2, 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz & 5 GHz |
| MIMO Configuration | 2x2:2 MU-MIMO |
| Maximum Data Rate | Up to 1.2 Gbps (300 Mbps on 2.4 GHz + 867 Mbps on 5 GHz) |
| Ethernet Ports | 1x Gigabit Ethernet (PoE In) |
| Power Method | PoE (802.3af/at) or 12V DC adapter |
| Power Consumption | 12.5 W (typical) |
| Dimensions (W x D x H) | 190 x 190 x 35 mm |
| Weight | 300 g |
| Mounting | Ceiling / wall mount (bracket included) |
| Management | Web GUI, SNMP, CLI, cloud management |
| Security | WPA2, WPA3, 802.1X, MAC filtering, VLAN support |
| Operating Temperature | 0 to 50 °C |
| Humidity | 5% to 95% non-condensing |
| LED Indicators | Power, LAN, WLAN (2.4G/5G) |
| Certifications | FCC, CE, IC |
| Cleaning | Wipe with a dry cloth; do not use liquid cleaners |
Frequently Asked Questions - EWS375AP ENGENIUS
How do I reset the EnGenius EWS375AP to factory defaults?
Locate the reset button on the device (usually a small pinhole). Press and hold it for about 10 seconds while the device is powered on. The LEDs will flash, indicating a reset. Release the button. The device will reboot with factory settings.
Does the EWS375AP support PoE?
Yes, it supports Power over Ethernet (PoE) via IEEE 802.3af/at. You can power it using a PoE switch or a PoE injector.
What is the maximum number of clients supported?
The EWS375AP can support up to 128 concurrent clients (64 per radio) under typical conditions.
Can I mount the access point on a wall?
Yes, the device comes with a mounting bracket for both ceiling and wall installation. Follow the instructions in the manual to secure it.
How to configure the EWS375AP for the first time?
Connect the AP to your network via Ethernet. Power it on. Use a web browser to access the default IP address (usually 192.168.1.1 or check your DHCP server). Log in with default credentials (admin/admin). Follow the setup wizard to configure SSID, security, and other settings.
Does the EWS375AP support mesh or roaming?
Yes, it supports EnGenius Mesh and 802.11r/k/v fast roaming when managed by an EnGenius controller or cloud service.
What security protocols are supported?
The access point supports WPA2-PSK, WPA3-SAE, WPA2-Enterprise, 802.1X, MAC address filtering, and hidden SSID.
How do I update the firmware?
Download the latest firmware from EnGenius support website. Log into the AP's web interface, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during update.
What is the maximum range of the EWS375AP?
Indoor range is typically up to 100 meters (330 ft) for 2.4 GHz and 50 meters (165 ft) for 5 GHz, depending on obstructions and environment.
Can I use it with a third-party controller?
The EWS375AP can operate in standalone mode or be managed by EnGenius EWS series controllers. It may also support SNMP for basic integration, but advanced features require EnGenius ecosystem.
User questions about EWS375AP ENGENIUS
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Access Point in PDF format for free! Find your manual EWS375AP - ENGENIUS and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. EWS375AP by ENGENIUS.