PFD-24 - Audio-visual furniture Middle Atlantic - Free user manual and instructions

Product Type	Audio-Visual Furniture
Brand	Middle Atlantic
Model	PFD-24
Category	Equipment Rack
Color	Black
Material	Steel
Height	42 inches (24U)
Width	19 inches
Depth	24 inches
Weight	Approximately 100 lbs (45 kg)
Number of Rack Units	24
Door Type	Hinged door with removable cover plate
Hinge Type	Male and female hinges with screws and hex key
Mounting Hardware Included	Screws, decorative caps, hex key, washers
Assembly Required	Yes, door and hinge installation
Tools Required	#2 Phillips screwdriver, hex key (provided)
Warranty	Limited lifetime warranty (typical)
Country of Origin	United States (likely)
Usage	Indoor AV equipment installation

Frequently Asked Questions - PFD-24 Middle Atlantic

How do I determine which side to install the hinges for the door?

Refer to Figure A in the manual. Determine the door swing direction to choose the correct hinge side. If two sets of mounting holes are present, use the lower holes.

What tools are needed for assembly?

You will need a #2 Phillips screwdriver and the provided hex key. The hex key is used for the female hinge installation.

Is the cover plate necessary?

No, the cover plate (if installed) should be knocked out and discarded as shown in Figure B.

What should I do if the washer comes off the hinge post during shipping?

The hinge post ships with a washer preinstalled. If it comes off, you must reinstall it before attaching the hinge to the enclosure.

How do I install the decorative cap?

After installing the male hinge with screws, snap the decorative cap over the screw head as indicated in Figure D.

Can the PFD-24 be used for server equipment?

Yes, it is designed for standard 19-inch rack-mountable AV and IT equipment up to 24U.

What is the weight capacity of the rack?

The weight capacity is not explicitly stated, but typical 24U steel racks support up to 800-1000 lbs when properly anchored.

Does the rack come pre-assembled?

No, the rack enclosure is not shown in the manual. The manual only covers door and hinge assembly. The main rack presumably requires separate assembly.

Are replacement hinges available?

Yes, replacement hinge kits can be ordered from Middle Atlantic or authorized dealers.

How do I clean the rack?

Wipe with a soft, dry cloth. Avoid abrasive cleaners or solvents that may damage the finish.

USER MANUAL PFD-24 Middle Atlantic

1) Determine door swing in order to know what side to install hinges. (FIGURE A)

NOTE: If two sets of mounting holes are present, use the lower holes.

Technical line drawing of a rectangular frame with circular holes and an inset showing a vertical panel with a lock (no text or symbols)

FIGURE A

2) Knock out cover plate (if installed) and discard. (FIGURE B)

Technical line drawing of a mechanical bracket with mounting holes and a flanged base (no text or symbols)

FIGURE B

3) Install male hinge to the enclosure. (FIGURE C)

NOTE: Hinge post ships with washer preinstalled. If the washer has come off during shipping, it must be reinstalled.

Technical line drawing of a mechanical component with a cylindrical pin and mounting bracket (no text or symbols)

FIGURE C

4) Install screws using a #2 Phillips driver. Install decorative cap. (FIGURE D)

Technical line drawing of a mechanical component with a cylindrical pin and threaded end (no text or symbols)

FIGURE D

5) Install female hinge to the door using provided hex key. (FIGURE E)

FIGURE E

6) Install the door. (FIGURE F)

Technical line drawing of a cabinet with internal shelves and an open door (no text or symbols)

FIGURE F

Middle Atlantic Products I-00033 Rev L