WD-62527 - Television MITSUBISHI - Free user manual and instructions
Find the device manual for free WD-62527 MITSUBISHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | DLP Rear Projection Television |
| Brand | Mitsubishi |
| Model | WD-62527 |
| Screen Size | 62 inches (diagonal) |
| Display Technology | DLP (Digital Light Processing) |
| Resolution | 1920 x 1080 (Full HD) |
| Aspect Ratio | 16:9 |
| Dimensions (without stand) | 57.3 x 39.8 x 22.0 inches (W x H x D) |
| Weight | Approximately 110 lbs (50 kg) |
| Power Consumption | 350W (typical) |
| Inputs | HDMI (2), Component (2), Composite (2), S-Video, RF, VGA |
| Outputs | Optical digital audio, analog audio L/R |
| Audio System | 15W x 2 built-in speakers |
| Remote Control | Included |
| Main Features | Closed Captioning, Sleep Timer, V-Chip Parental Controls, Picture-in-Picture |
| Cleaning Instructions | Wipe with a soft, dry cloth. Do not use liquid cleaners or solvents. |
| Safety Precautions | Do not block ventilation openings. Use a sturdy stand or wall mount. Avoid exposure to moisture. |
| Spare Parts Available | Replacement lamp assembly (part number 915P037010), remote control, power supply board |
| Repair Information | Lamp replacement requires removing access panel. Contact authorized service for other repairs. |
| Lamp Life | Approximately 6000 hours (typical) |
Frequently Asked Questions - WD-62527 MITSUBISHI
How do I connect my Blu-ray player to the Mitsubishi WD-62527?
Use an HDMI cable to connect the player to one of the two HDMI inputs on the TV. If HDMI is unavailable, use component video (Y, Pb, Pr) and red/white audio cables.
Why is there no picture on my TV?
Check that the TV is turned on and the input source is correct. Ensure the lamp is functioning. If the lamp indicator is red, it may need replacement. Also verify power and cable connections.
How do I replace the lamp in the WD-62527?
Turn off the TV and unplug it. Wait 15 minutes for cooling. Remove the lamp access door on the back. Unplug the old lamp module and insert the new one (part 915P037010). Replace the door and plug in the TV.
Can I mount this TV on a wall?
Yes, the WD-62527 is compatible with a VESA wall mount (pattern 400x400mm). Ensure the mount supports at least 110 lbs (50 kg) and secure it to wall studs.
How do I clean the screen?
Use a soft, dry microfiber cloth to gently wipe the screen. Do not apply liquids or abrasive cleaners. For stubborn smudges, slightly dampen the cloth with water.
The remote control is not working. What should I do?
Replace the batteries with fresh ones. Point the remote directly at the sensor on the TV. If still not working, try resetting the remote by removing batteries and pressing any button for 3 seconds.
How do I access the picture settings?
Press the Menu button on the remote, then use the arrow keys to navigate to Picture settings. Adjust brightness, contrast, color, and sharpness as desired.
What is the audio output configuration?
The TV has optical digital audio output (Toslink) for connecting to a soundbar or receiver, plus analog audio L/R outputs for external speakers.
How do I enable closed captioning?
Press the Menu button, go to Setup or Captions, and select Closed Captioning. Choose On or CC1, etc. Available via broadcast or HDMI.
What do I do if the TV overheats?
Immediately turn off and unplug the TV. Ensure ventilation slots are not blocked. Allow it to cool for at least 30 minutes. Restart and if issue persists, contact service.
User questions about WD-62527 MITSUBISHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Television in PDF format for free! Find your manual WD-62527 - MITSUBISHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. WD-62527 by MITSUBISHI.