RAC-M50EAG - Air-conditioner HITACHI - Free user manual and instructions
Find the device manual for free RAC-M50EAG HITACHI in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Split Air Conditioner |
| Brand | Hitachi |
| Model | RAC-M50EAG |
| Cooling Capacity | 5.0 kW (17000 BTU/h) |
| Heating Capacity | 5.5 kW (18700 BTU/h) |
| Power Supply | 230V / 50Hz / 1 Phase |
| Indoor Unit Dimensions (W x H x D) | 1050 x 320 x 220 mm |
| Outdoor Unit Dimensions (W x H x D) | 800 x 600 x 300 mm |
| Indoor Unit Weight | 12 kg |
| Outdoor Unit Weight | 35 kg |
| Refrigerant Type | R32 |
| Energy Efficiency Ratio (EER) | 3.2 |
| Seasonal Energy Efficiency Ratio (SEER) | 6.5 |
| Noise Level (Indoor) | 22 - 45 dB(A) |
| Noise Level (Outdoor) | 55 dB(A) |
| Airflow Rate (Max) | 650 m³/h |
| Filter Type | Washable Anti-bacterial Filter |
| Functions | Cooling, Heating, Fan, Dehumidifier, Auto Mode |
| Control | Remote Control + Wired Controller (optional) |
| Timer | 24-hour On/Off Timer |
| Sleep Mode | Yes |
| Self-cleaning Function | Yes (Evaporator Auto Clean) |
| Safety Features | Overload Protection, Auto Restart, Anti-corrosion Coating |
| Spare Parts Availability | Genuine parts available through Hitachi service centers |
| Warranty | 2 years (parts and labor) |
Frequently Asked Questions - RAC-M50EAG HITACHI
How do I clean the air filter?
Turn off the unit and remove the front panel. Take out the filter and wash it with warm water and mild detergent. Let it dry completely before reinserting. Clean every 2 weeks for optimal performance.
What does the 'Auto Clean' function do?
After cooling operation, the Auto Clean function runs the fan to dry the evaporator, preventing mold and bacteria growth. This keeps the unit clean and reduces odors.
Can I use an extension cord?
No. Always plug the air conditioner directly into a dedicated wall outlet. Extension cords can overheat and cause fire hazards.
How to set the timer?
Press the TIMER button on the remote. Use +/- to set the desired time for ON or OFF. Press SET to confirm. The unit will start/stop automatically.
Why is my unit not cooling?
Check if the filter is dirty, the remote is on the right mode (cool), and the set temperature is lower than room temp. Also ensure outdoor unit has proper airflow and is not blocked.
What does the 'Sleep' mode do?
Sleep mode gradually adjusts the temperature a few degrees over hours to match your sleep cycle. It also reduces fan noise for quiet operation.
How to reset the unit?
Unplug the air conditioner for 5 minutes, then plug it back in. This resets the electronic control board. If issues persist, contact service.
What refrigerant does this model use?
This model uses R32 refrigerant, which has lower global warming potential (GWP) than R410A. It is flammable, so only qualified technicians should service the system.
Can I install the unit myself?
It is recommended to have a professional install the split system. Improper installation can lead to leaks, inefficiency, and voids warranty.
How do I switch between Celsius and Fahrenheit?
On the remote control, press and hold the TEMP button for 3 seconds until the display changes. Repeat to toggle back.
User questions about RAC-M50EAG HITACHI
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Air-conditioner in PDF format for free! Find your manual RAC-M50EAG - HITACHI and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. RAC-M50EAG by HITACHI.