AT-AR2010V - Pare-feu matériel Allied Telesis - Free user manual and instructions
Find the device manual for free AT-AR2010V Allied Telesis in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Hardware Firewall |
| Brand | Allied Telesis |
| Model | AT-AR2010V |
| Form Factor | Desktop / Rackmount (1U) |
| Dimensions | Approx. 43 x 24 x 4.4 cm |
| Weight | Approx. 2.5 kg |
| Power Supply | AC 100-240V, 50-60Hz, 60W |
| Ethernet Ports | 8x Gigabit Ethernet (RJ-45), 2x SFP |
| Firewall Throughput | Up to 1 Gbps |
| VPN Support | IPsec, SSL VPN, up to 100 tunnels |
| Routing Protocols | BGP, OSPF, RIP, static routing |
| VLAN Support | IEEE 802.1Q, up to 256 VLANs |
| Security Features | Stateful inspection, IDS/IPS, NAT, ACL |
| Management | Web GUI, CLI (SSH, Telnet), SNMP, REST API |
| Logging & Monitoring | Syslog, SNMP, local/remote logging |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 5% to 95% non-condensing |
| Certifications | FCC, CE, RoHS |
| Warranty | Limited lifetime warranty (check manufacturer) |
Frequently Asked Questions - AT-AR2010V Allied Telesis
How do I perform a factory reset on the AT-AR2010V?
Power on the device, locate the reset button on the front panel. Use a paperclip to press and hold the button for about 10 seconds until the status LED flashes. This restores the device to factory defaults.
What is the default IP address to access the web interface?
The default IP address is 192.168.1.1 with subnet mask 255.255.255.0. Connect your computer to any LAN port and set a static IP in the same subnet (e.g., 192.168.1.100).
How can I update the firmware on the AT-AR2010V?
Download the latest firmware from the Allied Telesis support website. Log in to the web interface, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during the process.
Does the AT-AR2010V support VLANs?
Yes, it supports IEEE 802.1Q VLANs with up to 256 VLANs. You can configure them via the Interface > VLAN menu in the web interface.
What VPN protocols are supported?
The device supports IPsec and SSL VPN (OpenVPN). It can handle up to 100 concurrent VPN tunnels.
Can I use the AT-AR2010V as a router only?
Yes, you can disable the firewall features and use it purely as a router. However, it is designed as a security appliance with firewall capabilities.
How do I configure a static route?
Go to Routing > Static Routes in the web interface. Enter the destination network, subnet mask, next-hop IP, and interface. Enable the route and apply changes.
What is the maximum throughput of the firewall?
The stateful firewall throughput is up to 1 Gbps under ideal conditions. Actual performance may vary based on rules and traffic.
How to access the device via SSH?
Enable SSH in Services > Telnet/SSH. Ensure your management PC has network access to the device. Use an SSH client (e.g., PuTTY) with the device IP address and default credentials (admin/device serial number).
Where can I find the user manual for the AT-AR2010V?
The user manual is available for free on notice-facile.com or the Allied Telesis support website. It covers installation, configuration, and troubleshooting in detail.
User questions about AT-AR2010V Allied Telesis
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Pare-feu matériel in PDF format for free! Find your manual AT-AR2010V - Allied Telesis and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-AR2010V by Allied Telesis.