AT-ANC10S/2-001 - Network card Allied Telesis - Free user manual and instructions
Find the device manual for free AT-ANC10S/2-001 Allied Telesis in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Interface Card |
| Brand | Allied Telesis |
| Model | AT-ANC10S/2-001 |
| Interface | PCI Express x1 |
| Ports | 2 x 10/100/1000 Mbps RJ-45 |
| Data Rate | 10/100/1000 Mbps |
| Compliance Standards | IEEE 802.3, 802.3u, 802.3ab |
| Supported Operating Systems | Windows, Linux, macOS |
| Dimensions (W x D x H) | 120 mm x 65 mm x 20 mm |
| Weight | 50 g |
| Power Consumption | 2.5 W (typical) |
| LED Indicators | Link/Act per port |
| Jumbo Frame Support | Yes (up to 9 KB) |
| Wake-on-LAN | Supported |
| Operating Temperature | 0°C to 50°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% (non-condensing) |
| Compatible Slots | PCI Express x1, x4, x8, x16 |
| Driver Download | Available from Allied Telesis support site |
| Warranty | Limited Lifetime |
Frequently Asked Questions - AT-ANC10S/2-001 Allied Telesis
What operating systems are supported by the AT-ANC10S/2-001?
The AT-ANC10S/2-001 supports Windows, Linux, and macOS. Drivers can be downloaded from the Allied Telesis support website.
How do I install the network card?
Power off your computer, open the case, insert the card into an available PCI Express slot, secure it, close the case, power on, and install the appropriate drivers.
What is the maximum data transfer speed?
The card supports 10/100/1000 Mbps, with a maximum throughput of 1 Gbps per port.
Does it support Wake-on-LAN?
Yes, Wake-on-LAN is supported. Ensure the feature is enabled in the BIOS and the card's driver settings.
Can I use this card in a PCI Express x16 slot?
Yes, the card is compatible with PCI Express x1, x4, x8, and x16 slots. It will work at its rated speed.
How do I check if the card is recognized?
After installation, open Device Manager (Windows) or System Information (macOS/Linux). Look for 'Network adapters' and verify the device appears without errors.
What do the LED indicators mean?
Each port has a Link/Act LED. Solid green indicates a link, blinking indicates activity.
Does it support jumbo frames?
Yes, jumbo frames up to 9 KB are supported. Enable them in the network adapter settings for improved performance.
How do I clean the network card?
Use a soft, dry cloth to wipe the exterior. For the contacts, use isopropyl alcohol and a lint-free swab. Ensure the card is disconnected from power.
What should I do if the card is not detected?
Check that the card is properly seated in the slot. Try another PCIe slot. Update the motherboard BIOS and chipset drivers. Ensure the card is supported by your OS.
User questions about AT-ANC10S/2-001 Allied Telesis
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network card in PDF format for free! Find your manual AT-ANC10S/2-001 - Allied Telesis and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-ANC10S/2-001 by Allied Telesis.