AT-RG213 - Network Equipment Allied Telesis - Free user manual and instructions
Find the device manual for free AT-RG213 Allied Telesis in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Router/Gateway |
| Brand | Allied Telesis |
| Model | AT-RG213 |
| Dimensions (W x D x H) | 280 x 180 x 44 mm |
| Weight | 1.5 kg |
| Power Supply | 100-240V AC, 50-60Hz, external adapter |
| Power Consumption | 15W typical |
| WAN Ports | 1 x Gigabit Ethernet RJ-45 |
| LAN Ports | 4 x Gigabit Ethernet RJ-45 |
| Wireless Standard | 802.11 b/g/n (2.4 GHz) |
| Wireless Speed | Up to 300 Mbps |
| VPN Support | IPSec, PPTP, L2TP |
| Firewall | Stateful Packet Inspection (SPI) |
| QoS | Traffic prioritization supported |
| Management | Web-based GUI, CLI, SNMP |
| LED Indicators | Power, WAN, LAN (per port), Wireless |
| Operating Temperature | 0°C to 40°C |
| Storage Temperature | -20°C to 70°C |
| Humidity | 10% to 90% non-condensing |
| Certifications | FCC, CE, RoHS |
| Package Contents | AT-RG213, power adapter, Ethernet cable, quick start guide, resource CD |
| Warranty | Limited lifetime warranty |
Frequently Asked Questions - AT-RG213 Allied Telesis
How do I reset the AT-RG213 to factory defaults?
Use a paperclip to press and hold the Reset button on the back panel for 10 seconds until the power LED blinks. The device will reboot with factory settings.
What is the default IP address and login credentials?
The default IP address is 192.168.1.1. The default username is admin and password is password (case-sensitive).
How can I configure the wireless network?
Log into the web interface, navigate to Wireless > Basic Settings, enable the wireless radio, set the SSID, and choose security (WPA2-PSK recommended).
Does the AT-RG213 support VPN passthrough?
Yes, it supports IPSec, PPTP, and L2TP passthrough. For server side, you can configure VPN using the built-in VPN server.
How do I update the firmware?
Download the latest firmware from Allied Telesis support site. In the web interface, go to Administration > Firmware Upgrade, select the file, and click Upgrade. Do not power off during update.
Can I use the AT-RG213 as a switch only?
Yes, you can disable NAT and DHCP and connect it to another router. Configure the LAN IP to be in the same subnet as the upstream router.
What is the maximum number of concurrent users?
The device is designed for small to medium networks and can handle up to 50 concurrent users under normal traffic conditions.
How do I troubleshoot connectivity issues?
Check LEDs: power should be solid green, WAN link active, LAN ports connected. Use ping from a PC to the router IP. Log into the web interface and view System Log for errors.
Is the device wall-mountable?
Yes, the AT-RG213 has mounting holes on the bottom for wall mounting. Use appropriate screws and anchors (not included).
How do I enable QoS for better VoIP performance?
Go to Advanced > QoS, enable QoS, and set priority for VoIP traffic. You can specify ports or DSCP values to prioritize voice packets.
User questions about AT-RG213 Allied Telesis
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network Equipment in PDF format for free! Find your manual AT-RG213 - Allied Telesis and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. AT-RG213 by Allied Telesis.