VOI-8001 - NAS LEVELONE - Free user manual and instructions
Find the device manual for free VOI-8001 LEVELONE in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Attached Storage (NAS) |
| Brand | LevelOne |
| Model | VOI-8001 |
| Dimensions (H x W x D) | Approximately 150 x 90 x 180 mm |
| Weight | Approximately 1.0 kg |
| Power Supply | External AC adapter, 12V DC, 3A |
| Power Consumption | Typically 15-25 W |
| Network Interface | 1x Gigabit Ethernet (RJ-45) |
| USB Ports | 2x USB 2.0 for external storage or printer |
| Hard Drive Support | Supports 2.5" or 3.5" SATA HDD/SSD (single bay) |
| File System Supported | EXT3, EXT4, FAT32, NTFS |
| RAID Support | None (single disk) |
| Main Functions | File sharing (SMB/CIFS, NFS, FTP), backup, media server, download manager |
| Supported Protocols | TCP/IP, DHCP, DDNS, HTTP, HTTPS |
| User Management | Multi-user with password protection |
| Cooling | Fanless passive cooling |
| Maintenance & Cleaning | Keep vents clear; wipe with dry cloth. Avoid liquids. |
| Safety Instructions | Use only provided power adapter; avoid overloading; do not disassemble. |
| Spare Parts & Repairability | Spare parts available through authorized service; user-replaceable HDD. |
| General Information | Compatible with Windows, macOS, Linux; management via web interface. |
Frequently Asked Questions - VOI-8001 LEVELONE
How do I access the NAS from my computer?
Connect the NAS to your network via Ethernet. Use the web interface by entering the NAS IP address in a browser. Default credentials are often admin/admin (check manual).
Can I use SSDs instead of HDDs?
Yes, the NAS supports both 2.5" and 3.5" SATA SSDs and HDDs. SSDs will be faster and quieter.
How to install a hard drive?
Open the enclosure, slide the drive into the bay, secure with screws if provided. Then initialize the disk via the web interface.
Does it support RAID?
No, the VOI-8001 is a single-bay NAS, so RAID is not supported. For data redundancy, consider regular backups or a multi-bay model.
Can I access my files remotely?
Yes, enable FTP or WebDAV in the settings. You may need to set up port forwarding on your router and use a dynamic DNS service.
What is the default IP address?
By default, the NAS obtains an IP via DHCP. Check your router's DHCP client list or use the provided discovery software to find its IP.
How to reset to factory defaults?
Press and hold the reset button on the back for 10 seconds using a paperclip. The NAS will reboot with factory settings.
Can I connect a USB printer?
Yes, plug a USB printer into the NAS. The NAS will act as a print server, allowing network printing from your computers.
Is the NAS compatible with Time Machine?
Yes, the NAS supports AFP protocol, which is used by Time Machine. Configure a shared folder as a Time Machine backup destination.
What should I do if the NAS is not detected?
Check the Ethernet cable, ensure the power is on, and verify your router assigns IP addresses. Try a different cable or port. Use the reset button as last resort.
User questions about VOI-8001 LEVELONE
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your NAS in PDF format for free! Find your manual VOI-8001 - LEVELONE and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. VOI-8001 by LEVELONE.