LE2700AE - Network switch Black Box - Free user manual and instructions
Find the device manual for free LE2700AE Black Box in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Network Switch |
| Brand | Black Box |
| Model | LE2700AE |
| Number of Ports | 24 |
| Port Speed | 10/100/1000 Mbps (Gigabit Ethernet) |
| Form Factor | Rack-mountable (1U) |
| Dimensions (W x D x H) | 17.5 x 8.0 x 1.75 inches |
| Weight | 5.5 lbs (2.5 kg) |
| Power Supply | Internal AC 100-240V, 50/60Hz |
| Power Consumption | 30W (max) |
| LED Indicators | Power, Link/Activity per port |
| MAC Address Table | 8K entries |
| VLAN Support | Yes, up to 256 VLANs |
| Management | Web interface, SNMP, CLI |
| Switching Capacity | 48 Gbps |
| Mounting | 19-inch rack ears included |
| Operating Temperature | 32°F to 122°F (0°C to 50°C) |
| Humidity | 10% to 90% (non-condensing) |
| Safety Certifications | FCC, CE, UL |
| Warranty | Limited Lifetime |
Frequently Asked Questions - LE2700AE Black Box
What is the default IP address to access the web interface?
The default IP address is 192.168.1.1. Ensure your computer is on the same subnet (e.g., 192.168.1.x) and connect via a web browser.
How do I reset the switch to factory defaults?
Press and hold the Reset button on the front panel for about 10 seconds until all LEDs flash. The switch will reboot with default settings.
Can I mount this switch on a wall?
This switch is designed for 19-inch rack mounting. Wall mounting is not recommended due to ventilation requirements.
What type of cables should I use?
Use Category 5e or Category 6 Ethernet cables for optimal performance at Gigabit speeds.
How do I configure VLANs?
Access the web interface, go to VLAN Configuration. You can create up to 256 VLANs and assign ports accordingly.
The switch is not powering on. What should I check?
First, verify the power cord is properly connected. Check the power outlet with another device. If using a power strip, ensure it is on. If still off, try a different outlet.
How do I update the firmware?
Download the latest firmware from the Black Box support website. In the web interface, go to Maintenance > Firmware Upgrade and upload the file. Do not power off during upgrade.
What is the maximum cable length for Gigabit Ethernet?
The maximum cable length is 100 meters (328 feet) for twisted-pair copper cables.
Does this switch support PoE (Power over Ethernet)?
No, the LE2700AE is a non-PoE switch. For PoE, consider other models in the Black Box series.
How can I improve network performance?
Ensure flow control is enabled on both ends. Use jumbo frames if supported, and avoid network loops with proper STP configuration.
User questions about LE2700AE Black Box
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Network switch in PDF format for free! Find your manual LE2700AE - Black Box and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. LE2700AE by Black Box.