Century Breverra Ascend - Car seat GRACO - Free user manual and instructions
Find the device manual for free Century Breverra Ascend GRACO in PDF.
Pick your language and provide your email: we'll send you a specifically translated version.
| Product Type | Convertible Car Seat |
| Brand | Graco |
| Model | Century Breverra Ascend |
| Category | Car Seat |
| Usage Orientation | Forward-Facing Only |
| Weight Range (Forward-Facing) | 22–65 lbs (10–29.5 kg) |
| Height Range (Forward-Facing) | 29–49 inches (74–124 cm) |
| Harness Type | 5-Point Harness with Adjustable Headrest |
| Dimensions (Approx.) | 19.5″ L x 18.5″ W x 24″ H |
| Weight (Car Seat) | 17.5 lbs (7.9 kg) |
| Installation Method | Vehicle Seat Belt or LATCH System |
| Power Source | None (Manual) |
| Main Functions | Forward-Facing Harness Mode, Recline Positions, Adjustable Headrest, Cup Holder |
| Safety Features | Side Impact Protection, Steel-Reinforced Frame, Energy-Absorbing Foam |
| Cleaning & Maintenance | Remove Cover: Machine Wash Cold, Air Dry; Wipe Shell with Mild Soap |
| Spare Parts & Repairability | Replacement Parts Available from Graco; Contact Customer Service |
| Certification | Meets or Exceeds FMVSS 213 Standards |
| Manufacturer | Graco Children's Products Inc. |
| Expiration | 7 Years from Date of Manufacture |
Frequently Asked Questions - Century Breverra Ascend GRACO
What is the weight and height limit for forward-facing use?
The seat accommodates children weighing 22 to 65 lbs (10–29.5 kg) and standing 29 to 49 inches (74–124 cm) tall.
Can this seat be used rear-facing?
No, the Century Breverra Ascend is a forward-facing only car seat. It does not support rear-facing installation.
How do I install the car seat using LATCH?
Attach the LATCH connectors to the vehicle's lower anchors, tighten the strap, and ensure the seat is snug. Recline adjusters should be set per the child's weight. Refer to the manual for details.
What is the proper way to clean the car seat cover?
Remove the cover and machine wash cold with mild detergent, then air dry. Do not bleach or iron. The plastic shell can be wiped with a damp cloth.
How do I adjust the headrest and harness height?
Press the headrest adjustment lever and slide the headrest up or down. The harness must be at or slightly above the child's shoulders. Re-thread the harness if needed.
What is the expiration date of this car seat?
Graco car seats expire 7 years from the date of manufacture. Check the sticker on the seat for the manufacture date.
Is this car seat FAA approved for aircraft use?
Yes, the Graco Century Breverra Ascend is FAA certified for use on aircraft when installed with the seat belt.
Can I use the LATCH system in the center seating position?
Only if the vehicle manufacturer specifies lower anchors in that position. Otherwise, use the seat belt. Check your vehicle owner's manual.
How do I replace missing parts?
Contact Graco Customer Service at 1-800-345-4109 or visit gracobaby.com for replacement parts.
What is the weight of the car seat itself?
The car seat weighs approximately 17.5 lbs (7.9 kg).
User questions about Century Breverra Ascend GRACO
0 question about this device. Answer the ones you know or ask your own.
Ask a new question about this device
No questions yet. Be the first to ask one.
Download the instructions for your Car seat in PDF format for free! Find your manual Century Breverra Ascend - GRACO and take your electronic device back in hand. On this page are published all the documents necessary for the use of your device. Century Breverra Ascend by GRACO.